contiki/cpu/cc26xx-cc13xx/dev/oscillators.h

102 lines
3.8 KiB
C
Raw Normal View History

2015-05-01 14:40:14 +00:00
/*
* Copyright (c) 2015, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*---------------------------------------------------------------------------*/
/**
* \addtogroup cc26xx
* @{
*
* \defgroup cc26xx-oscillators CC13xx/CC26xx oscillator control
2015-05-01 14:40:14 +00:00
*
* Wrapper around CC26xxware/CC13xxware OSC functions that we need in Contiki.
2015-05-01 14:40:14 +00:00
*
* All CC26xxware OSC control requires access to the semaphore module within
* AUX. Thus, in addition to enabling the oscillator interface, we need to
* start the clock to SMPH and restore it to its previous state when we are
* done.
* @{
*
* \file
* Header file for the CC13xx/CC26xx oscillator control
2015-05-01 14:40:14 +00:00
*/
/*---------------------------------------------------------------------------*/
#ifndef OSCILLATORS_H_
#define OSCILLATORS_H_
/*---------------------------------------------------------------------------*/
/**
* \brief Set the LF clock source to be the LF XOSC
*
* This function is only called once as soon as the system starts.
*
* Do not switch the LF clock source to the RC OSC for normal system operation
* See CC26xx Errata (swrz058)
*/
void oscillators_select_lf_xosc(void);
/**
* \brief Set the LF clock source to be the LF RCOSC
*
* This function is only called once, when the systen transitions to a full
* shutdown
*
* Do not switch the LF clock source to the RC OSC for normal system operation
* See CC26xx Errata (swrz058)
*/
void oscillators_select_lf_rcosc(void);
/**
* \brief Requests the HF XOSC as the source for the HF clock, but does not
* perform the actual switch.
*
* This triggers the startup sequence of the HF XOSC and returns so the CPU
* can perform other tasks while the XOSC is starting.
*
* The XOSC is requested as the source for the HF as well as the MF clock.
*/
void oscillators_request_hf_xosc(void);
/**
* \brief Performs the switch to the XOSC
*
* This function must be preceded by a call to oscillators_request_hf_xosc()
*/
void oscillators_switch_to_hf_xosc(void);
/**
* \brief Switches MF and HF clock source to be the HF RC OSC
*/
void oscillators_switch_to_hf_rc(void);
/*---------------------------------------------------------------------------*/
#endif /* OSCILLATORS_H_ */
/*---------------------------------------------------------------------------*/
/**
* @}
* @}
*/