contiki/tests/blink-green.c

#include <mc1322x.h>
#include <board.h>

#define DELAY 400000

#define LED (1ULL << LED_GREEN)

void main(void) {	
	volatile uint32_t i;
	
	gpio_pad_dir(LED);

	while(1) {

		gpio_data(LED);
		
		for(i=0; i<DELAY; i++) { continue; }

		gpio_data(0);
		
		for(i=0; i<DELAY; i++) { continue; }

	};

}
better variable defs. touch objdir to fix problem where board.h would try to get created after it's already been created. 2010-02-23 23:14:32 +00:00			`#include <mc1322x.h>`
			`#include <board.h>`
updated to use the leds on the RedBee hardware and made it a little more general. Signed-off-by: Mariano Alvira <mar@devl.org> 2009-06-22 16:35:39 +00:00
better variable defs. touch objdir to fix problem where board.h would try to get created after it's already been created. 2010-02-23 23:14:32 +00:00			`#define DELAY 400000`
preliminary interrupts. looks like it is entering the isr but isn't leaving correctly. 2009-04-20 22:31:13 +00:00
use new gpio interface 2010-03-17 02:03:38 +00:00			`#define LED (1ULL << LED_GREEN)`
initial commit. includes test code that toggles pin 26 and a perl script that loads the code over UART1. 2009-03-27 20:00:10 +00:00
better variable defs. touch objdir to fix problem where board.h would try to get created after it's already been created. 2010-02-23 23:14:32 +00:00			`void main(void) {`
initial commit. includes test code that toggles pin 26 and a perl script that loads the code over UART1. 2009-03-27 20:00:10 +00:00			`volatile uint32_t i;`
better variable defs. touch objdir to fix problem where board.h would try to get created after it's already been created. 2010-02-23 23:14:32 +00:00
use new gpio interface 2010-03-17 02:03:38 +00:00			`gpio_pad_dir(LED);`
initial commit. includes test code that toggles pin 26 and a perl script that loads the code over UART1. 2009-03-27 20:00:10 +00:00
			`while(1) {`

use new gpio interface 2010-03-17 02:03:38 +00:00			`gpio_data(LED);`
initial commit. includes test code that toggles pin 26 and a perl script that loads the code over UART1. 2009-03-27 20:00:10 +00:00
			`for(i=0; i<DELAY; i++) { continue; }`

use new gpio interface 2010-03-17 02:03:38 +00:00			`gpio_data(0);`

initial commit. includes test code that toggles pin 26 and a perl script that loads the code over UART1. 2009-03-27 20:00:10 +00:00			`for(i=0; i<DELAY; i++) { continue; }`

			`};`
better variable defs. touch objdir to fix problem where board.h would try to get created after it's already been created. 2010-02-23 23:14:32 +00:00
initial commit. includes test code that toggles pin 26 and a perl script that loads the code over UART1. 2009-03-27 20:00:10 +00:00			`}`
better variable defs. touch objdir to fix problem where board.h would try to get created after it's already been created. 2010-02-23 23:14:32 +00:00