contiki/cpu/cc26xx-cc13xx/ieee-addr.h

106 lines
4.3 KiB
C
Raw Normal View History

2015-02-25 12:09:56 +00:00
/*
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*---------------------------------------------------------------------------*/
/**
* \addtogroup cc26xx
* @{
*
* \defgroup cc26xx-ieee-addr CC13xx/CC26xx IEEE Address Control
2015-02-25 12:09:56 +00:00
*
* Driver for the retrieval of an IEEE address from flash
*
* The user can specify a hardcoded IEEE address through the
* IEEE_ADDR_CONF_HARDCODED configuration macro.
*
* If the user does not hard-code an address, then one will be read from either
* the primary location (InfoPage) or from the secondary location (on flash).
*
* In order to allow the user to easily program nodes with addresses, the
* secondary location is given priority: If it contains a valid address then
* it will be chosen in favour of the one on InfoPage.
*
* In this context, an address is valid if at least one of the 8 bytes does not
* equal 0xFF. If all 8 bytes are 0xFF, then the primary location will be used.
*
* In all cases, the address is assumed to be written little-endian.
*
* Lastly, it is possible to override the 2 LSB's of the address by using the
* NODE_ID make variable.
* @{
*
* \file
* Header file with register and macro declarations for the cc26xx IEEE address
* driver
*/
/*---------------------------------------------------------------------------*/
#ifndef IEEE_ADDR_H_
#define IEEE_ADDR_H_
/*---------------------------------------------------------------------------*/
#include "contiki-conf.h"
#include <stdint.h>
/*---------------------------------------------------------------------------*/
/**
* \name IEEE address locations
*
* The address of the secondary location can be configured by the platform
* or example
*
* @{
*/
#define IEEE_ADDR_LOCATION_PRIMARY 0x500012F0 /**< Primary IEEE address location */
#ifdef IEEE_ADDR_CONF_LOCATION_SECONDARY
#define IEEE_ADDR_LOCATION_SECONDARY IEEE_ADDR_CONF_LOCATION_SECONDARY
#else
#define IEEE_ADDR_LOCATION_SECONDARY 0x0001FFC8 /**< Secondary IEEE address location */
#endif
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \brief Copy the node's IEEE address to a destination memory area
* \param dst A pointer to the destination area where the IEEE address is to be
* written
* \param len The number of bytes to write to destination area
*
* This function will copy \e len LS bytes and it will invert byte order in
* the process. The factory address on devices is normally little-endian,
* therefore you should expect dst to store the address in a big-endian order.
*/
void ieee_addr_cpy_to(uint8_t *dst, uint8_t len);
/*---------------------------------------------------------------------------*/
#endif /* IEEE_ADDR_H_ */
/*---------------------------------------------------------------------------*/
/**
* @}
* @}
*/