contiki/cpu/x86/drivers/legacy_pc/pci.c

281 lines
8.6 KiB
C
Raw Normal View History

/*
* Copyright (C) 2015, Intel Corporation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <assert.h>
#include "pci.h"
#include "helpers.h"
#include "syscalls.h"
/* I/O port for PCI configuration address */
#define PCI_CONFIG_ADDR_PORT 0xCF8
/* I/O port for PCI configuration data */
#define PCI_CONFIG_DATA_PORT 0xCFC
PROT_DOMAINS_ALLOC(dom_client_data_t, root_complex_drv);
/*---------------------------------------------------------------------------*/
/* Initialize PCI configuration register address in preparation for accessing
* the specified register.
*/
static void
set_addr(pci_config_addr_t addr)
{
addr.en_mapping = 1;
outl(PCI_CONFIG_ADDR_PORT, addr.raw);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Read from the specified PCI configuration register.
* \param addr Address of PCI configuration register.
* \return Value read from PCI configuration register.
*/
uint32_t
pci_config_read(pci_config_addr_t addr)
{
set_addr(addr);
return inl(PCI_CONFIG_DATA_PORT);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Write to the PCI configuration data port.
* \param addr Address of PCI configuration register.
* \param data Value to write.
*/
void
pci_config_write(pci_config_addr_t addr, uint32_t data)
{
set_addr(addr);
outl(PCI_CONFIG_DATA_PORT, data);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Enable PCI command bits of the specified PCI configuration
* register.
* \param addr Address of PCI configuration register.
* \param flags Flags used to enable PCI command bits.
*/
void
pci_command_enable(pci_config_addr_t addr, uint32_t flags)
{
uint32_t data;
addr.reg_off = 0x04; /* PCI COMMAND_REGISTER */
data = pci_config_read(addr);
pci_config_write(addr, data | flags);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Set current PIRQ to interrupt queue agent. PCI based interrupts
* PIRQ[A:H] are then available for consumption by either the 8259
* PICs or the IO-APIC depending on configuration of the 8 PIRQx
* Routing Control Registers PIRQ[A:H]. See also pci_pirq_set_irq().
* \param agent Interrupt Queue Agent to be used, IRQAGENT[0:3].
* \param pin Interrupt Pin Route to be used, INT[A:D].
* \param pirq PIRQ to be used, PIRQ[A:H].
*/
SYSCALLS_DEFINE_SINGLETON(pci_irq_agent_set_pirq,
root_complex_drv,
IRQAGENT agent, INTR_PIN pin, PIRQ pirq)
{
uint16_t value;
uint32_t rcba_addr, offset = 0;
rcba_addr = PROT_DOMAINS_MMIO(root_complex_drv);
assert(agent >= IRQAGENT0 && agent <= IRQAGENT3);
assert(pin >= INTA && pin <= INTD);
assert(pirq >= PIRQA && pirq <= PIRQH);
switch(agent) {
case IRQAGENT0:
if(pin != INTA) {
halt();
}
offset = 0x3140;
break;
case IRQAGENT1:
offset = 0x3142;
break;
case IRQAGENT2:
if(pin != INTA) {
halt();
}
offset = 0x3144;
break;
case IRQAGENT3:
offset = 0x3146;
}
prot_domains_enable_mmio();
MMIO_READW(value, *(uint16_t ATTR_MMIO_ADDR_SPACE *)(rcba_addr + offset));
/* clear interrupt pin route and set corresponding pirq. */
switch(pin) {
case INTA:
value &= ~0xF;
value |= pirq;
break;
case INTB:
value &= ~0xF0;
value |= (pirq << 4);
break;
case INTC:
value &= ~0xF00;
value |= (pirq << 8);
break;
case INTD:
value &= ~0xF000;
value |= (pirq << 12);
}
MMIO_WRITEW(*(uint16_t ATTR_MMIO_ADDR_SPACE *)(rcba_addr + offset), value);
prot_domains_disable_mmio();
}
/*---------------------------------------------------------------------------*/
/**
* \brief Set current IRQ to PIRQ. The interrupt router can be
* programmed to allow PIRQ[A:H] to be routed internally
* to the 8259 as ISA compatible interrupts. See also
* pci_irq_agent_set_pirq().
* \param pirq PIRQ to be used, PIRQ[A:H].
* \param pin IRQ to be used, IRQ[0:15].
* \param route_to_legacy Whether or not the interrupt should be routed to PIC 8259.
*/
void
pci_pirq_set_irq(PIRQ pirq, uint8_t irq, uint8_t route_to_legacy)
{
pci_config_addr_t pci;
uint32_t value;
assert(pirq >= PIRQA && pirq <= PIRQH);
assert(irq >= 0 && irq <= 0xF);
assert(route_to_legacy == 0 || route_to_legacy == 1);
pci.raw = 0;
pci.bus = 0;
pci.dev = 31;
pci.func = 0;
pci.reg_off = (pirq <= PIRQD) ? 0x60 : 0x64; /* PABCDRC and PEFGHRC Registers */
value = pci_config_read(pci);
switch(pirq) {
case PIRQA:
case PIRQE:
value &= ~0x8F;
value |= irq;
value |= (!route_to_legacy << 7);
break;
case PIRQB:
case PIRQF:
value &= ~0x8F00;
value |= (irq << 8);
value |= (!route_to_legacy << 15);
break;
case PIRQC:
case PIRQG:
value &= ~0x8F0000;
value |= (irq << 16);
value |= (!route_to_legacy << 23);
break;
case PIRQD:
case PIRQH:
value &= ~0x8F000000;
value |= (irq << 24);
value |= (!route_to_legacy << 31);
}
set_addr(pci);
outl(PCI_CONFIG_DATA_PORT, value);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Initialize a structure for a PCI device driver that performs
* MMIO to address range 0. Assumes that device has already
* been configured with an MMIO address range 0, e.g. by
* firmware.
* \param c_this Structure that will be initialized to represent the driver.
* \param pci_addr PCI base address of device.
* \param mmio_sz Size of MMIO region.
* \param meta Base address of optional driver-defined metadata.
* \param meta_sz Size of optional driver-defined metadata.
*/
void
pci_init(pci_driver_t ATTR_KERN_ADDR_SPACE *c_this,
pci_config_addr_t pci_addr,
size_t mmio_sz,
uintptr_t meta,
size_t meta_sz)
{
uintptr_t mmio;
/* The BAR value is masked to clear non-address bits. */
mmio = pci_config_read(pci_addr) & ~0xFFF;
prot_domains_reg(c_this, mmio, mmio_sz, meta, meta_sz, false);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Initialize the PCI root complex driver.
*/
void
pci_root_complex_init(void)
{
uint32_t rcba_addr;
pci_config_addr_t pci = { .raw = 0 };
pci.dev = 31;
pci.reg_off = 0xF0; /* Root Complex Base Address Register */
/* masked to clear non-address bits. */
rcba_addr = pci_config_read(pci) & ~0x3FFF;
PROT_DOMAINS_INIT_ID(root_complex_drv);
prot_domains_reg(&root_complex_drv, rcba_addr, 0x4000, 0, 0, false);
SYSCALLS_INIT(pci_irq_agent_set_pirq);
SYSCALLS_AUTHZ(pci_irq_agent_set_pirq, root_complex_drv);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Prevent further invocations of pci_irq_agent_set_pirq.
*/
void
pci_root_complex_lock(void)
{
SYSCALLS_DEAUTHZ(pci_irq_agent_set_pirq, root_complex_drv);
}
/*---------------------------------------------------------------------------*/