Apple-2-SW/contiki
1
0
Fork 0
mirror of https://github.com/oliverschmidt/contiki.git synced 2024-11-18 12:05:11 +00:00
Code Issues Projects Releases Wiki Activity
bb5d5546ce
contiki/platform/atarixl/Makefile.atarixl

77 lines
3.0 KiB
Makefile
Raw Normal View History

Added platform 'Atari XL'. Don't be afraid, I'm not trying to have more retro platforms than "real" platforms ;-) The platform 'atarixl' will replace the platform 'atari'. However I need both for some transition period.
2013-06-01 20:49:00 +00:00
#
# Copyright (c) 2007, Adam Dunkels.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# 3. The name of the author may not be used to endorse or promote
# products derived from this software without specific prior
# written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
# OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
# GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# This file is part of the Contiki operating system.
#
# Author: Oliver Schmidt <ol.sc@web.de>
#
Added SLIP support to retro platforms. The cc65 tool chain comes with V.24 drivers so it seems reasonable to use the existing Contiki SLIP driver to implement network access via SLIP as alternative to Ethernet. Some notes: - The Ethernet configuration was simplified in order to allow share it with SLIP. - The Contiki SLIP driver presumes an interrupt driven serial receiver to write into the SLIP buffer. However the cc65 V.24 drivers aren't up to that. Therefore the main loops were extended to pull received data from the V.24 buffers and push it into the SLIP buffer. - As far as I understand the serial sender is supposed to block until the data is sent. Therefore a loop calls the non-blocking V.24 driver until the data is sent. On all platforms there's only one V.24 driver available. Therefore V.24 drivers are always loaded statically. On the Apple][ the mouse driver is now loaded statically - independently from SLIP vs. Ethernet. After all there's only one mouse driver available. However there's a major benefit with SLIP: Here all drivers are loaded statically. Therefore the dynamic module loader isn't necessary at all. And without the loader the heap manager isn't necessary at all. This allows for a reduction in code size roughly compensating for the size of the SLIP buffer.
2017-02-15 22:43:28 +00:00
ifdef SLIP
DEFINES += STATIC_DRIVER=atrxrdev_ser
else
DEFINES += STATIC_DRIVER=cs8900a
endif
Revert to static Ethernet driver for the ATARI. After all there's no momentum for a W5100-based Ethernet solution on the ATARI. So I revert to static linkage of the CS8900A driver as this improves program load times.
2017-01-26 23:18:25 +00:00
Added platform 'Atari XL'. Don't be afraid, I'm not trying to have more retro platforms than "real" platforms ;-) The platform 'atarixl' will replace the platform 'atari'. However I need both for some transition period.
2013-06-01 20:49:00 +00:00
CONTIKI_CPU = $(CONTIKI)/cpu/6502
include $(CONTIKI_CPU)/Makefile.6502
Rearranged ATARI memory usage. The cc65 memory map for the ATARI XL has two holes so the linker needs hints which object files go where. Source changes lead to object file size changes requiring now and then to rearrange the object files.
2015-10-28 11:22:43 +00:00
SHADOW_RAM_SOURCEFILES = ethernet.c ethernet-drv.c timer.c uip.c uiplib.c
Some 6502 target changes - platform/atarixl/Makefile.atarixl: put two more objects into high memory - platform/atarixl/contiki-conf.h: define WWW_CONF_WGET_EXEC - tools/6502/Makefile: add 'clean' target; remove unused CONTIKI define
2016-06-17 14:42:50 +00:00
SHADOW_RAM2_SOURCEFILES = clock.c uip_arch.c uip_arp.c unload.c random.c
Added platform 'Atari XL'. Don't be afraid, I'm not trying to have more retro platforms than "real" platforms ;-) The platform 'atarixl' will replace the platform 'atari'. However I need both for some transition period.
2013-06-01 20:49:00 +00:00
Adjusted Makefile to the final 'atarixl' cc65 target. - Assign source files to the splitted shadow RAM areas. - Switched to dynamic Ethernet driver loading.
2013-10-03 20:40:25 +00:00
# Set target-specific variable values
${addprefix $(OBJECTDIR)/,${call oname, $(SHADOW_RAM_SOURCEFILES)}}: CFLAGS += --code-name SHADOW_RAM
${addprefix $(OBJECTDIR)/,${call oname, $(SHADOW_RAM2_SOURCEFILES)}}: CFLAGS += --code-name SHADOW_RAM2
Final adjustments for the switch from 'atari' to 'atarixl'.
2013-10-06 15:23:39 +00:00
Added platform 'Atari XL'. Don't be afraid, I'm not trying to have more retro platforms than "real" platforms ;-) The platform 'atarixl' will replace the platform 'atari'. However I need both for some transition period.
2013-06-01 20:49:00 +00:00
ifeq ($(MAKECMDGOALS),disk)
ifndef DIR2ATR
${error DIR2ATR not defined! You must specify where dir2atr resides}
endif
endif
disk: all
mkdir atr
cp $(CONTIKI)/tools/$(TARGET)/dos25/dos.sys atr/dos.sys
cp $(CONTIKI)/tools/$(TARGET)/dos25/dup.sys atr/dup.sys
cp $(CONTIKI_PROJECT).$(TARGET) atr/autorun.sys
Added SLIP support to retro platforms. The cc65 tool chain comes with V.24 drivers so it seems reasonable to use the existing Contiki SLIP driver to implement network access via SLIP as alternative to Ethernet. Some notes: - The Ethernet configuration was simplified in order to allow share it with SLIP. - The Contiki SLIP driver presumes an interrupt driven serial receiver to write into the SLIP buffer. However the cc65 V.24 drivers aren't up to that. Therefore the main loops were extended to pull received data from the V.24 buffers and push it into the SLIP buffer. - As far as I understand the serial sender is supposed to block until the data is sent. Therefore a loop calls the non-blocking V.24 driver until the data is sent. On all platforms there's only one V.24 driver available. Therefore V.24 drivers are always loaded statically. On the Apple][ the mouse driver is now loaded statically - independently from SLIP vs. Ethernet. After all there's only one mouse driver available. However there's a major benefit with SLIP: Here all drivers are loaded statically. Therefore the dynamic module loader isn't necessary at all. And without the loader the heap manager isn't necessary at all. This allows for a reduction in code size roughly compensating for the size of the SLIP buffer.
2017-02-15 22:43:28 +00:00
ifdef SLIP
cp $(CONTIKI)/tools/6502/sample.cfg atr/contiki.cfg
else
Added platform 'Atari XL'. Don't be afraid, I'm not trying to have more retro platforms than "real" platforms ;-) The platform 'atarixl' will replace the platform 'atari'. However I need both for some transition period.
2013-06-01 20:49:00 +00:00
cp $(CONTIKI)/tools/$(TARGET)/sample.cfg atr/contiki.cfg
Added SLIP support to retro platforms. The cc65 tool chain comes with V.24 drivers so it seems reasonable to use the existing Contiki SLIP driver to implement network access via SLIP as alternative to Ethernet. Some notes: - The Ethernet configuration was simplified in order to allow share it with SLIP. - The Contiki SLIP driver presumes an interrupt driven serial receiver to write into the SLIP buffer. However the cc65 V.24 drivers aren't up to that. Therefore the main loops were extended to pull received data from the V.24 buffers and push it into the SLIP buffer. - As far as I understand the serial sender is supposed to block until the data is sent. Therefore a loop calls the non-blocking V.24 driver until the data is sent. On all platforms there's only one V.24 driver available. Therefore V.24 drivers are always loaded statically. On the Apple][ the mouse driver is now loaded statically - independently from SLIP vs. Ethernet. After all there's only one mouse driver available. However there's a major benefit with SLIP: Here all drivers are loaded statically. Therefore the dynamic module loader isn't necessary at all. And without the loader the heap manager isn't necessary at all. This allows for a reduction in code size roughly compensating for the size of the SLIP buffer.
2017-02-15 22:43:28 +00:00
endif
Added mouse support for the Atari.
2014-01-20 21:51:40 +00:00
ifeq ($(findstring WITH_MOUSE,$(DEFINES)),WITH_MOUSE)
Make use of new cl65 option --print-target-path. The new cl65 option --print-target-path allows to get rid of CC65_HOME altogether.
2016-06-03 11:30:25 +00:00
cp $(CC65_TARGET_DIR)/drv/mou/atrxst.mou atr/contiki.mou
Added mouse support for the Atari.
2014-01-20 21:51:40 +00:00
endif
Added platform 'Atari XL'. Don't be afraid, I'm not trying to have more retro platforms than "real" platforms ;-) The platform 'atarixl' will replace the platform 'atari'. However I need both for some transition period.
2013-06-01 20:49:00 +00:00
ifeq ($(HTTPD-CFS),1)
cp httpd-cfs/index.htm atr/index.htm
cp httpd-cfs/backgrnd.gif atr/backgrnd.gif
cp httpd-cfs/contiki.gif atr/contiki.gif
cp httpd-cfs/notfound.htm atr/notfound.htm
endif
$(DIR2ATR) -b Dos25 1040 contiki.atr atr
rm -r atr
Reference in New Issue Copy Permalink