mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-08-08 02:28:59 +00:00
Updated accelerometer drivers to avoid conflicts with radio transceiver.
This commit is contained in:
enricmcalvo
parent
3563089a91
commit
436e4dce1c
@ -56,7 +56,8 @@ static uint16_t int1_mask = 0, int2_mask = 0;
|
||||
/* Keep track of when the interrupt was last seen in order to reduce the amount
|
||||
of interrupts. Kind of like button debouncing. This can't be per int-pin, as
|
||||
there can be several very different int per pin (eg tap && freefall). */
|
||||
static volatile clock_time_t ints_lasttime[] = {0, 0, 0, 0, 0, 0, 0, 0};
|
||||
// XXX Not used now, only one global timer.
|
||||
//static volatile clock_time_t ints_lasttime[] = {0, 0, 0, 0, 0, 0, 0, 0};
|
||||
|
||||
/* Bitmasks and bit flag variable for keeping track of adxl345 status. */
|
||||
enum ADXL345_STATUSTYPES {
|
||||
@ -129,7 +130,7 @@ accm_write_reg(u8_t reg, u8_t val) {
|
||||
PRINTFDEBUG("WRITE_REG 0x%02X @ reg 0x%02X\n", val, reg);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Read several registers in a stream.
|
||||
/* Write several registers from a stream.
|
||||
args:
|
||||
len number of bytes to read
|
||||
data pointer to where the data is read from
|
||||
@ -375,7 +376,7 @@ static struct timer suppressTimer1, suppressTimer2;
|
||||
interrupt(PORT1_VECTOR) port1_isr (void) {
|
||||
ENERGEST_ON(ENERGEST_TYPE_IRQ);
|
||||
/* ADXL345_IFG.x goes high when interrupt occurs, use to check what interrupted */
|
||||
if (ADXL345_IFG & ADXL345_INT1_PIN){
|
||||
if ((ADXL345_IFG & ADXL345_INT1_PIN) && !!(ADXL345_IFG & CC2420_FIFOP_PIN)){
|
||||
/* Check if this should be suppressed or not */
|
||||
if(timer_expired(&suppressTimer1)) {
|
||||
timer_set(&suppressTimer1, SUPPRESS_TIME_INT1);
|
||||
@ -383,7 +384,7 @@ interrupt(PORT1_VECTOR) port1_isr (void) {
|
||||
process_poll(&accmeter_process);
|
||||
LPM4_EXIT;
|
||||
}
|
||||
} else if (ADXL345_IFG & ADXL345_INT2_PIN){
|
||||
} else if ((ADXL345_IFG & ADXL345_INT2_PIN) && !!(ADXL345_IFG & CC2420_FIFOP_PIN)){
|
||||
/* Check if this should be suppressed or not */
|
||||
if(timer_expired(&suppressTimer2)) {
|
||||
timer_set(&suppressTimer2, SUPPRESS_TIME_INT2);
|
||||
|
||||
@ -43,12 +43,6 @@
|
||||
#include <stdio.h>
|
||||
#include "i2cmaster.h"
|
||||
|
||||
//XXX Temporary place for defines that are lacking in mspgcc4's gpio.h
|
||||
#ifndef P1SEL2_
|
||||
#define P1SEL2_ 0x0041 /* Port 1 Selection 2 */
|
||||
sfrb(P1SEL2, P1SEL2_);
|
||||
#endif
|
||||
|
||||
#define DEBUGLEDS 0
|
||||
#if DEBUGLEDS
|
||||
#undef LEDS_ON(x)
|
||||
@ -75,18 +69,69 @@ enum ADXL345_AXIS {
|
||||
Z_AXIS = 4,
|
||||
};
|
||||
|
||||
/* -------------------------------------------------------------------------- */
|
||||
/* Init the accelerometer: ports, pins, registers, interrupts (none enabled), I2C,
|
||||
default threshold values etc. */
|
||||
void accm_init(void);
|
||||
|
||||
/* Write to a register.
|
||||
args:
|
||||
reg register to write to
|
||||
val value to write
|
||||
*/
|
||||
void accm_write_reg(u8_t reg, u8_t val);
|
||||
|
||||
/* Write several registers from a stream.
|
||||
args:
|
||||
len number of bytes to read
|
||||
data pointer to where the data is read from
|
||||
First byte in stream must be the register address to begin writing to.
|
||||
The data is then written from the second byte and increasing. The address byte
|
||||
is not included in length len. */
|
||||
void accm_write_stream(u8_t len, u8_t *data);
|
||||
|
||||
/* Read one register.
|
||||
args:
|
||||
reg what register to read
|
||||
returns the value of the read register
|
||||
*/
|
||||
u8_t accm_read_reg(u8_t reg);
|
||||
|
||||
/* Read several registers in a stream.
|
||||
args:
|
||||
reg what register to start reading from
|
||||
len number of bytes to read
|
||||
whereto pointer to where the data is saved
|
||||
*/
|
||||
void accm_read_stream(u8_t reg, u8_t len, u8_t *whereto);
|
||||
|
||||
/* Read an axis of the accelerometer (x, y or z). Return value is a signed 10 bit int.
|
||||
The resolution of the acceleration measurement can be increased up to 13 bit, but
|
||||
will change the data format of this read out. Refer to the data sheet if so is
|
||||
wanted/needed. */
|
||||
int16_t accm_read_axis(enum ADXL345_AXIS axis);
|
||||
|
||||
/* Sets the g-range, ie the range the accelerometer measures (ie 2g means -2 to +2 g
|
||||
on every axis). Possible values:
|
||||
ADXL345_RANGE_2G
|
||||
ADXL345_RANGE_4G
|
||||
ADXL345_RANGE_8G
|
||||
ADXL345_RANGE_16G
|
||||
Example:
|
||||
accm_set_grange(ADXL345_RANGE_4G);
|
||||
*/
|
||||
void accm_set_grange(u8_t grange);
|
||||
|
||||
/* Map interrupt (FF, tap, dbltap etc) to interrupt pin (IRQ_INT1, IRQ_INT2).
|
||||
This must come after accm_init() as the registers will otherwise be overwritten. */
|
||||
void accm_set_irq(uint8_t int1, uint8_t int2);
|
||||
|
||||
/* Macros for setting the pointers to callback functions from the interrupts.
|
||||
The function will be called with an u8_t as parameter, containing the interrupt
|
||||
flag register from the ADXL345. That way, several interrupts can be mapped to
|
||||
the same pin and be read from the */
|
||||
#define ACCM_REGISTER_INT1_CB(ptr) accm_int1_cb = ptr;
|
||||
#define ACCM_REGISTER_INT2_CB(ptr) accm_int2_cb = ptr;
|
||||
/* -------------------------------------------------------------------------- */
|
||||
/* Application definitions, change if required by application. */
|
||||
|
||||
@ -104,27 +149,27 @@ void accm_set_irq(uint8_t int1, uint8_t int2);
|
||||
*/
|
||||
/* Time after an interrupt that subsequent interrupts are suppressed. Should later
|
||||
be turned into one specific time per type of interrupt (tap, freefall etc) */
|
||||
#define SUPPRESS_TIME_INT1 CLOCK_SECOND
|
||||
#define SUPPRESS_TIME_INT2 CLOCK_SECOND
|
||||
#define SUPPRESS_TIME_INT1 CLOCK_SECOND/4
|
||||
#define SUPPRESS_TIME_INT2 CLOCK_SECOND/4
|
||||
|
||||
/* Suggested defaults according to the data sheet etc */
|
||||
#define ADXL345_THRESH_TAP_DEFAULT 0x48 // 4.5g (0x30 == 3.0g) (datasheet: 3g++)
|
||||
#define ADXL345_OFSX_DEFAULT 0x00 // for calibration, set 0 for long...
|
||||
#define ADXL345_OFSX_DEFAULT 0x00 // for individual units calibration purposes
|
||||
#define ADXL345_OFSY_DEFAULT 0x00
|
||||
#define ADXL345_OFSZ_DEFAULT 0x00
|
||||
#define ADXL345_DUR_DEFAULT 0x20 // 20 ms (datasheet: 10ms++)
|
||||
#define ADXL345_LATENT_DEFAULT 0x50 // 100 ms (datasheet: 20ms++)
|
||||
#define ADXL345_WINDOW_DEFAULT 0xFF // 320 ms (datasheet: 80ms++)
|
||||
#define ADXL345_THRESH_ACT_DEFAULT 0x20 // 2g
|
||||
#define ADXL345_THRESH_INACT_DEFAULT 0x13 // 1.2g
|
||||
#define ADXL345_TIME_INACT_DEFAULT 0x02 // 2 s
|
||||
#define ADXL345_THRESH_ACT_DEFAULT 0x15 // 1.3g (62.5 mg/LSB)
|
||||
#define ADXL345_THRESH_INACT_DEFAULT 0x08 // 0.5g (62.5 mg/LSB)
|
||||
#define ADXL345_TIME_INACT_DEFAULT 0x02 // 2 s (1 s/LSB)
|
||||
#define ADXL345_ACT_INACT_CTL_DEFAULT 0xFF // all axis involved, ac-coupled
|
||||
#define ADXL345_THRESH_FF_DEFAULT 0x09 // 563 mg
|
||||
#define ADXL345_TIME_FF_DEFAULT 0x20 // 160 ms
|
||||
#define ADXL345_TAP_AXES_DEFAULT 0x07 // all axis, no suppression
|
||||
|
||||
#define ADXL345_BW_RATE_DEFAULT (0x00|ADXL345_SRATE_100) // 100 Hz, normal operation
|
||||
#define ADXL345_POWER_CTL_DEFAULT 0x08 // no link, no autosleep, start normal measuring
|
||||
#define ADXL345_POWER_CTL_DEFAULT 0x28 // link bit set, no autosleep, start normal measuring
|
||||
#define ADXL345_INT_ENABLE_DEFAULT 0x00 // no interrupts enabled
|
||||
#define ADXL345_INT_MAP_DEFAULT 0x00 // all mapped to int_1
|
||||
|
||||
@ -134,7 +179,7 @@ void accm_set_irq(uint8_t int1, uint8_t int2);
|
||||
reflected in the _read_axis() function. Also, the resolution can be increased
|
||||
from 10 bit to at most 13 bit, but this also changes position of MSB etc on data
|
||||
format so check this in read_axis() too. */
|
||||
#define ADXL345_DATA_FORMAT_DEFAULT (0x00|ADXL345_RANGE_2G) // right-justify, 4g, 10-bit mode, int is active high
|
||||
#define ADXL345_DATA_FORMAT_DEFAULT (0x00|ADXL345_RANGE_2G) // right-justify, 2g, 10-bit mode, int is active high
|
||||
#define ADXL345_FIFO_CTL_DEFAULT 0x00 // FIFO bypass mode
|
||||
|
||||
/* -------------------------------------------------------------------------- */
|
||||
@ -207,7 +252,11 @@ void accm_set_irq(uint8_t int1, uint8_t int2);
|
||||
|
||||
|
||||
/* The adxl345 has programmable sample rates, but unexpected results may occur if the wrong
|
||||
rate and I2C bus speed is used (see datasheet p 17). Sample rates in Hz.
|
||||
rate and I2C bus speed is used (see datasheet p 17). Sample rates in Hz. This
|
||||
setting does not change the internal sampling rate, just how often it is piped
|
||||
to the output registers (ie the interrupt features use the full sample rate
|
||||
internally).
|
||||
|
||||
Example use:
|
||||
adxl345_set_reg(ADXL345_BW_RATE, ((_ADXL345_STATUS & LOW_POWER) | ADXL345_SRATE_50));
|
||||
*/
|
||||
@ -232,10 +281,6 @@ void accm_set_irq(uint8_t int1, uint8_t int2);
|
||||
void (*accm_int1_cb)(u8_t reg);
|
||||
void (*accm_int2_cb)(u8_t reg);
|
||||
|
||||
/* Macros for setting the callback pointers */
|
||||
#define ACCM_REGISTER_INT1_CB(ptr) accm_int1_cb = ptr;
|
||||
#define ACCM_REGISTER_INT2_CB(ptr) accm_int2_cb = ptr;
|
||||
|
||||
/* Interrupt 1 and 2 events; ADXL345 signals interrupt on INT1 or INT2 pins,
|
||||
ISR is invoked and polls the accelerometer process which invokes the callbacks. */
|
||||
process_event_t int1_event, int2_event; // static ?
|
||||
|
||||
Loading…
Reference in New Issue
Block a user