Remove legacy sniffer configuration: cc2538dk

This commit is contained in:
George Oikonomou 2016-07-24 04:28:12 +01:00
parent 07f984eec2
commit 4a4b3a344d

View File

@ -150,10 +150,6 @@ typedef uint32_t rtimer_clock_t;
#define SLIP_ARCH_CONF_USB 0 /**< SLIP over UART by default */
#endif
#ifndef CC2538_RF_CONF_SNIFFER_USB
#define CC2538_RF_CONF_SNIFFER_USB 0 /**< Sniffer out over UART by default */
#endif
#ifndef DBG_CONF_USB
#define DBG_CONF_USB 0 /**< All debugging over UART by default */
#endif
@ -168,12 +164,6 @@ typedef uint32_t rtimer_clock_t;
#endif
#endif
#if !CC2538_RF_CONF_SNIFFER_USB
#ifndef CC2538_RF_CONF_SNIFFER_UART
#define CC2538_RF_CONF_SNIFFER_UART 0 /**< UART to use with sniffer */
#endif
#endif
#if !DBG_CONF_USB
#ifndef DBG_CONF_UART
#define DBG_CONF_UART 0 /**< UART to use for debugging */
@ -200,15 +190,6 @@ typedef uint32_t rtimer_clock_t;
#endif
#endif
/*
* When set, the radio turns off address filtering and sends all captured
* frames down a peripheral (UART or USB, depending on the value of
* CC2538_RF_CONF_SNIFFER_USB)
*/
#ifndef CC2538_RF_CONF_SNIFFER
#define CC2538_RF_CONF_SNIFFER 0
#endif
/**
* \brief Define this as 1 to build a headless node.
*
@ -229,12 +210,6 @@ typedef uint32_t rtimer_clock_t;
#undef STARTUP_CONF_VERBOSE
#define STARTUP_CONF_VERBOSE 0
/* Little sanity check: We can't have quiet sniffers */
#if CC2538_RF_CONF_SNIFFER
#error "CC2538_RF_CONF_SNIFFER == 1 and CC2538_CONF_QUIET == 1"
#error "These values are conflicting. Please set either to 0"
#endif
#endif /* CC2538_CONF_QUIET */
/**
@ -243,8 +218,7 @@ typedef uint32_t rtimer_clock_t;
#ifndef USB_SERIAL_CONF_ENABLE
#define USB_SERIAL_CONF_ENABLE \
((SLIP_ARCH_CONF_USB & SLIP_ARCH_CONF_ENABLED) | \
DBG_CONF_USB | \
(CC2538_RF_CONF_SNIFFER & CC2538_RF_CONF_SNIFFER_USB))
DBG_CONF_USB)
#endif
/*
@ -264,9 +238,6 @@ typedef uint32_t rtimer_clock_t;
#define UART_IN_USE_BY_SLIP(u) (SLIP_ARCH_CONF_ENABLED && \
!SLIP_ARCH_CONF_USB && \
SLIP_ARCH_CONF_UART == (u))
#define UART_IN_USE_BY_RF_SNIFFER(u) (CC2538_RF_CONF_SNIFFER && \
!CC2538_RF_CONF_SNIFFER_USB && \
CC2538_RF_CONF_SNIFFER_UART == (u))
#define UART_IN_USE_BY_DBG(u) (!DBG_CONF_USB && DBG_CONF_UART == (u))
#define UART_IN_USE_BY_UART1(u) (UART1_CONF_UART == (u))
@ -274,7 +245,6 @@ typedef uint32_t rtimer_clock_t;
UART_CONF_ENABLE && \
(UART_IN_USE_BY_SERIAL_LINE(u) || \
UART_IN_USE_BY_SLIP(u) || \
UART_IN_USE_BY_RF_SNIFFER(u) || \
UART_IN_USE_BY_DBG(u) || \
UART_IN_USE_BY_UART1(u)) \
)