Add sniffer and 802 frame reporting

This commit is contained in:
dak664 2010-02-23 17:37:51 +00:00
parent 64d57a3dd8
commit 4ded42db1e

View File

@ -28,7 +28,7 @@
*
* This file is part of the Contiki operating system.
*
* @(#)$Id: rf230bb.c,v 1.5 2010/02/22 22:23:18 dak664 Exp $
* @(#)$Id: rf230bb.c,v 1.6 2010/02/23 17:37:51 dak664 Exp $
*/
/*
* This code is almost device independent and should be easy to port.
@ -51,13 +51,25 @@
#include "dev/leds.h"
#include "dev/spi.h"
#include "rf230bb.h"
//#include "dev/rf230.h"
//#include "dev/rf230_const.h"
#include "net/rime/packetbuf.h"
#include "net/rime/rimestats.h"
#include "net/netstack.h"
#if JACKDAW
#include "sicslow_ethernet.h"
#include "uip.h"
#include "uip_arp.h" //For ethernet header structure
#define ETHBUF(x) ((struct uip_eth_hdr *)x)
#define UIP_IP_BUF ((struct uip_ip_hdr *)&uip_buf[UIP_LLH_LEN])
/* 6lowpan max size + ethernet header size + 1 */
static uint8_t raw_buf[127+ UIP_LLH_LEN +1];
extern uint8_t mac_createEthernetAddr(uint8_t * ethernet, uip_lladdr_t * lowpan);
extern rimeaddr_t macLongAddr;
#include "rndis/rndis_task.h"
#endif
#include "sys/timetable.h"
#define WITH_SEND_CCA 0
@ -701,27 +713,50 @@ rf230_prepare(const void *payload, unsigned short payload_len)
memcpy(pbuf,&timestamp,TIMESTAMP_LEN);
pbuf+=TIMESTAMP_LEN;
#endif /* RF230_CONF_TIMESTAMPS */
/*------------------------------------------------------------*/
/* If jackdaw report frame to ethernet interface */
#if JACKDAW && 0
params.payload_len = total_len;
params.payload = buffer;
mac_logTXtoEthernet(&params, &result);
#endif /* JACKDAW */
/* Wait for any previous transmission to finish (?) */
// rf230_waitidle();
// hal_subregister_write(SR_TRX_CMD, CMD_FORCE_TRX_OFF);
// delay_us(TIME_P_ON_TO_TRX_OFF);
/* Enable auto retry (?) */
// radio_set_trx_state(TX_ARET_ON);
#if JACKDAW
// mac_logTXtoEthernet(&params, &result);
if (usbstick_mode.raw != 0) {
uint8_t sendlen;
/* Toggle the SLP_TR pin to initiate the frame transmission. */
// hal_set_slptr_high();
// hal_set_slptr_low();
// hal_frame_write(buffer, total_len);
/* Get the raw frame */
memcpy(&raw_buf[UIP_LLH_LEN], buffer, total_len);
sendlen = total_len;
/* Setup generic ethernet stuff */
ETHBUF(raw_buf)->type = htons(0x809A); //UIP_ETHTYPE_802154 0x809A
// uint64_t tempaddr;
/* Check for broadcast message */
if(rimeaddr_cmp(packetbuf_addr(PACKETBUF_ADDR_RECEIVER), &rimeaddr_null)) {
ETHBUF(raw_buf)->dest.addr[0] = 0x33;
ETHBUF(raw_buf)->dest.addr[1] = 0x33;
ETHBUF(raw_buf)->dest.addr[2] = UIP_IP_BUF->destipaddr.u8[12];
ETHBUF(raw_buf)->dest.addr[3] = UIP_IP_BUF->destipaddr.u8[13];
ETHBUF(raw_buf)->dest.addr[4] = UIP_IP_BUF->destipaddr.u8[14];
ETHBUF(raw_buf)->dest.addr[5] = UIP_IP_BUF->destipaddr.u8[15];
} else {
/* Otherwise we have a real address */
// tempaddr = p->dest_addr.addr64;
// byte_reverse((uint8_t *)&tempaddr, 8);
mac_createEthernetAddr((uint8_t *) &(ETHBUF(raw_buf)->dest.addr[0]),
(uip_lladdr_t *)packetbuf_addr(PACKETBUF_ADDR_RECEIVER));
}
// tempaddr = p->src_addr.addr64;
// memcpy(&tempaddr,packetbuf_addr(PACKETBUF_ADDR_SENDER),sizeof(tempaddr));
// byte_reverse((uint8_t *)&tempaddr, 8);
mac_createEthernetAddr((uint8_t *) &(ETHBUF(raw_buf)->src.addr[0]),(uip_lladdr_t *)&uip_lladdr.addr);
// printf("Low2Eth: Sending 802.15.4 packet to ethernet\n\r");
sendlen += UIP_LLH_LEN;
usb_eth_send(raw_buf, sendlen, 0);
// rndis_stat.rxok++;
}
#endif /* JACKDAW */
RELEASE_LOCK();
return 0;
@ -731,6 +766,13 @@ static int
rf230_send(const void *payload, unsigned short payload_len)
{
rf230_prepare(payload, payload_len);
#if JACKDAW
// In sniffer mode we don't ever send anything
if (usbstick_mode.sendToRf == 0) {
uip_len = 0;
return 0;
}
#endif /* JACKDAW */
return rf230_transmit(payload_len);
}
/*---------------------------------------------------------------------------*/
@ -1042,6 +1084,49 @@ rf230_read(void *buf, unsigned short bufsize)
if(len < AUX_LEN) {
return 0;
}
#if JACKDAW
/*------------------------------------------------------------*/
/* If jackdaw report frame to ethernet interface */
// mac_logRXtoEthernet(&params, &result);
if (usbstick_mode.raw != 0) {
uint8_t sendlen;
/* Get the raw frame */
memcpy(&raw_buf[UIP_LLH_LEN], buf, len);
sendlen = len;
/* Setup generic ethernet stuff */
ETHBUF(raw_buf)->type = htons(0x809A); //UIP_ETHTYPE_802154 0x809A
// uint64_t tempaddr;
/* Check for broadcast message */
if(rimeaddr_cmp(packetbuf_addr(PACKETBUF_ADDR_RECEIVER), &rimeaddr_null)) {
ETHBUF(raw_buf)->dest.addr[0] = 0x33;
ETHBUF(raw_buf)->dest.addr[1] = 0x33;
ETHBUF(raw_buf)->dest.addr[2] = UIP_IP_BUF->destipaddr.u8[12];
ETHBUF(raw_buf)->dest.addr[3] = UIP_IP_BUF->destipaddr.u8[13];
ETHBUF(raw_buf)->dest.addr[4] = UIP_IP_BUF->destipaddr.u8[14];
ETHBUF(raw_buf)->dest.addr[5] = UIP_IP_BUF->destipaddr.u8[15];
} else {
/* Otherwise we have a real address */
// tempaddr = p->dest_addr.addr64;
// byte_reverse((uint8_t *)&tempaddr, 8);
mac_createEthernetAddr((uint8_t *) &(ETHBUF(raw_buf)->dest.addr[0]),
(uip_lladdr_t *)packetbuf_addr(PACKETBUF_ADDR_RECEIVER));
}
// tempaddr = p->src_addr.addr64;
// memcpy(&tempaddr,packetbuf_addr(PACKETBUF_ADDR_SENDER),sizeof(tempaddr));
// byte_reverse((uint8_t *)&tempaddr, 8);
mac_createEthernetAddr((uint8_t *) &(ETHBUF(raw_buf)->src.addr[0]),(uip_lladdr_t *)&uip_lladdr.addr);
// printf("Low2Eth: Sending 802.15.4 packet to ethernet\n\r");
sendlen += UIP_LLH_LEN;
usb_eth_send(raw_buf, sendlen, 0);
}
#endif /* JACKDAW */
return len - AUX_LEN;
}