Added elfloader machine dependent code for STM32W.

cpu/stm32w108/Makefile.stm32w108

@@ -16,7 +16,7 @@ CONTIKI_CPU=$(CONTIKI)/cpu/stm32w108
 
 CONTIKI_CPU_DIRS = . dev hal simplemac hal/micro/cortexm3 hal/micro/cortexm3/stm32w108
 
-STM32W_C = leds-arch.c leds.c clock.c watchdog.c uart1.c uart1-putchar.c slip_uart1.c \
+STM32W_C = leds-arch.c leds.c clock.c watchdog.c uart1.c uart1-putchar.c slip_uart1.c slip.c\
 		stm32w-radio.c stm32w_systick.c uip_arch.c rtimer-arch.c adc.c micro.c sleep.c \
 		micro-common.c micro-common-internal.c clocks.c mfg-token.c nvm.c flash.c rand.c
 
@@ -29,6 +29,11 @@ else
 STM32W_C += crt_stm32w108.c
 endif
 
+ifdef ELF_LOADER
+ELFLOADER  = elfloader-arch.c symtab.c
+endif
+
+
 # .s and .s79 not specified here because in Makefile.include only .c and .S suffixes are replaced with .o.
 CONTIKI_TARGET_SOURCEFILES += $(STM32W_C) \
                               $(SYSAPPS) $(ELFLOADER) \
@@ -55,7 +60,9 @@ AS       = iasmarm
 AR       = iarchive
 OBJCOPY  = ielftool
 STRIP    = strip
+ifndef DEBUG
 OPTI = -Ohz --no_unroll
+endif
 CFLAGSNO = --endian=little --cpu=Cortex-M3 -e --diag_suppress Pa050 -D BOARD_HEADER=\"board.h\" \
 			-D BOARD_MB851 -D "PLATFORM_HEADER=\"hal/micro/cortexm3/compiler/iar.h\""  -D CORTEXM3 \
 			-D CORTEXM3_STM32W108 -D PHY_STM32W108XX -D DISABLE_WATCHDOG -D ENABLE_ADC_EXTENDED_RANGE_BROKEN \
@@ -73,14 +80,18 @@ OBJOPTS = --bin
 
 else
 # GCC
-CC	  = arm-none-eabi-gcc
+CC	 = arm-none-eabi-gcc
 LD       = arm-none-eabi-gcc
-AS	  = arm-none-eabi-gcc
+AS	 = arm-none-eabi-gcc
+NM	 = arm-none-eabi-nm
 AR       = arm-none-eabi-ar
 OBJCOPY  = arm-none-eabi-objcopy
 STRIP    = arm-none-eabi-strip
-SIZE		 = arm-none-eabi-size
+SIZE     = arm-none-eabi-size
-OPTI = -Os -ffunction-sections -fshort-enums
+ifndef DEBUG
+OPTI = -Os -ffunction-sections 
+endif
+
 CFLAGSNO = -mthumb -mcpu=cortex-m3 -fsigned-char -D "PLATFORM_HEADER=\"hal/micro/cortexm3/compiler/gnu.h\"" \
 			-D BOARD_HEADER=\"board.h\" -g -Wall -Wno-strict-aliasing -mlittle-endian \
 			-D BOARD_MB851   -D CORTEXM3 -D CORTEXM3_STM32W108 -D PHY_STM32W108XX -D DISABLE_WATCHDOG -D ENABLE_ADC_EXTENDED_RANGE_BROKEN \
@@ -94,26 +105,33 @@ LDFLAGS += -mcpu=cortex-m3 \
 	    -Wl,-static \
 			-u Default_Handler \
 	    -nostartfiles \
-	    -Wl,-Map -Xlinker contiki-$(TARGET).map \
+	    -Wl,-Map -Xlinker contiki-$(TARGET).map
-			-Wl,--gc-sections
+	    
+ifndef ELF_LOADER
+ # Do not use garbage collection when the elfloader is used.
+ LDFLAGS += -Wl,--gc-sections
+endif 
+ 
 SIZEFLAGS = -A
 OBJOPTS = -O binary
 
 endif
 
-ifdef COFFEE_FILES                #if files are defined force definition of COFFEE_ADDRESS
 
- ifndef COFFEE_ADDRESS
+ifndef IAR
-   COFFEE_ADDRESS=0x8010000
+
- endif
+ifdef COFFEE_ADDRESS
- COFFEE_ADDRESS1 = $(shell echo $$(( $(COFFEE_ADDRESS) + 1 )))
+ COFFEE = 1
+endif
+
+# Default values for coffee section start.
+ifndef COFFEE_ADDRESS
+ COFFEE_ADDRESS = 0x8010c00
+endif
+
+ifeq ($(COFFEE),1)
  CONTIKI_TARGET_SOURCEFILES += cfs-coffee.c cfs-coffee-arch.c
- CFLAGS += -DCOFFEE_FILES=$(COFFEE_FILES) -DCOFFEE_ADDRESS=$(COFFEE_ADDRESS)
+ CFLAGS += -DCOFFEE_ADDRESS=$(COFFEE_ADDRESS)
- ifdef IAR
-  LDFLAGS+= --config $(CONTIKI_CPU)/hal/micro/cortexm3/stm32w108/iar-cfg-coffee.icf
- else
-  LDFLAGS+= -Wl,--section-start=.coffeefiles=$(COFFEE_ADDRESS)
- endif
  
  #If $make invokation passed starting address use phony target to force synchronization of source to .coffeefiles section
  #Warning: recompilation will not be forced if the starting address is then dropped, with dire consequences:
@@ -127,11 +145,24 @@ ifdef COFFEE_FILES                #if files are defined force definition of COFF
    $(OBJECTDIR)/cfs-coffee-arch.o    : coffee      #cfs-coffee-arch uses COFFEE_FILES, COFFEE_ADDRESS
    $(OBJECTDIR)/cfs-coffee.o         : coffee      #core routine requires recompilation
 
-#endif
+else
-#endif
+ # Coffee starts at the end of the flash, before NVM section.
+ COFFEE_ADDRESS = 0x801F400
+endif
+
+LDFLAGS+= -Wl,--section-start=.coffee=$(COFFEE_ADDRESS)
+
+else #IAR
+
+ ifeq ($(COFFEE),1)
+  LDFLAGS+= --config $(CONTIKI_CPU)/hal/micro/cortexm3/stm32w108/iar-cfg-coffee.icf
+ endif
  
 endif
 
+
+
+
 FLASHER = $(CONTIKI)/tools/stm32w/stm32w_flasher/linux/stm32w_flasher
 
 # Check if we are running under Windows
@@ -172,6 +203,7 @@ else
  SEDCOMMAND = sed -e '1s,\($(OBJECTDIR)\\$*\)\.o:,\1.o : ,g' -e '1!s,\($(OBJECTDIR)\\$*\)\.o:, ,g' -e 's,\\\([^ ]\),/\1,g' -e 's,$$, \\,' -e '$$s, \\$$,,' < $(@:.o=.P) > $(@:.o=.d)
 endif
 
+
 CUSTOM_RULE_C_TO_OBJECTDIR_O = 1
 $(OBJECTDIR)/%.o: %.c
 	$(CC) $(CFLAGS) $< --dependencies=m $(@:.o=.P) -o $@
@@ -183,9 +215,26 @@ CUSTOM_RULE_C_TO_CO = 1
 	$(CC) $(CFLAGS) -DAUTOSTART_ENABLE $< -o $@
 else #IAR
 
+CUSTOM_RULE_C_TO_CE = 1
+%.ce: %.c
+	$(CC) $(CFLAGS) -fno-merge-constants -fno-function-sections -DAUTOSTART_ENABLE -c $< -o $@
+	$(STRIP) --strip-unneeded -g -x $@
+
 CUSTOM_RULE_LINK = 1
 
-%.$(TARGET): %.co $(PROJECT_OBJECTFILES) $(PROJECT_LIBRARIES) contiki-$(TARGET).a
+.PHONY: symbols.c symbols.h
+ifdef CORE
+ifeq ($(wildcard $(CORE)),)
+ ${error $(CORE) doesn't exist}
+endif
+symbols.c:
+	$(NM) $(CORE) | awk -f $(CONTIKI)/tools/mknmlist > symbols.c	
+else
+symbols.c symbols.h:
+	@$(CONTIKI)/tools/make-empty-symbols
+endif
+
+%.$(TARGET): %.co $(PROJECT_OBJECTFILES) $(PROJECT_LIBRARIES) contiki-$(TARGET).a $(OBJECTDIR)/symbols.o
 	$(LD) $(LDFLAGS) $(TARGET_STARTFILES) ${filter-out %.a,$^} -Wl,-\( ${filter %.a,$^} $(TARGET_LIBFILES) -Wl,-\) -o $@
 	@echo >> contiki-$(TARGET).map
 	@$(SIZE) $(SIZEFLAGS) $@ >> contiki-$(TARGET).map

cpu/stm32w108/elfloader-arch.c

@@ -0,0 +1,141 @@
+#include "contiki.h"
+#include "elfloader-arch.h"
+#include "cfs-coffee-arch.h"
+
+#if 1
+#include <stdio.h>
+#define PRINTF(...) printf(__VA_ARGS__)
+#else
+#define PRINTF(...) do {} while (0)
+#endif
+
+#define ELF32_R_TYPE(info)      ((unsigned char)(info))
+
+/* Supported relocations */
+
+#define R_ARM_ABS32	2
+#define R_ARM_THM_CALL	10
+
+/* Adapted from elfloader-arm.c */
+
+static uint32_t datamemory_aligned[(ELFLOADER_DATAMEMORY_SIZE+3)/4]; //word aligned
+static uint8_t* datamemory = (uint8_t *)datamemory_aligned;
+VAR_AT_SEGMENT (static const uint16_t textmemory[ELFLOADER_TEXTMEMORY_SIZE/2],".elf_text") = {0}; //halfword aligned
+/*---------------------------------------------------------------------------*/
+void *
+elfloader_arch_allocate_ram(int size)
+{
+  if(size > sizeof(datamemory_aligned)){
+    PRINTF("RESERVED RAM TOO SMALL\n");
+  }
+  return datamemory;
+}
+/*---------------------------------------------------------------------------*/
+void *
+elfloader_arch_allocate_rom(int size)
+{
+  if(size > sizeof(textmemory)){
+    PRINTF("RESERVED FLASH TOO SMALL\n");
+  }
+  return (void *)textmemory;
+}
+/*---------------------------------------------------------------------------*/
+#define READSIZE sizeof(datamemory_aligned)
+
+void elfloader_arch_write_rom(int fd, unsigned short textoff, unsigned int size, char *mem)
+{
+  int32u  ptr;
+  int     nbytes;
+
+  cfs_seek(fd, textoff, CFS_SEEK_SET);
+
+  cfs_seek(fd, textoff, CFS_SEEK_SET);
+  for(ptr = 0; ptr < size; ptr += READSIZE) {
+
+    /* Read data from file into RAM. */
+    nbytes = cfs_read(fd, (unsigned char *)datamemory, READSIZE);
+
+    /* Write data to flash. */
+    stm32w_flash_write((int32u)mem, datamemory, nbytes);
+  }
+}
+/*---------------------------------------------------------------------------*/
+
+
+void elfloader_arch_relocate(int fd,
+			unsigned int sectionoffset,
+			char *sectionaddr,
+                        struct elf32_rela *rela, char *addr)
+{
+  unsigned int type;
+
+  type = ELF32_R_TYPE(rela->r_info);
+
+  cfs_seek(fd, sectionoffset + rela->r_offset, CFS_SEEK_SET);
+
+/*   PRINTF("elfloader_arch_relocate: type %d\n", type); */
+/*   PRINTF("Addr: %p, Addend: %ld\n",   addr, rela->r_addend); */
+  switch(type) {
+  case R_ARM_ABS32:
+    {
+      int32_t addend;
+      cfs_read(fd, (char*)&addend, 4);
+      addr += addend;
+      cfs_seek(fd, -4, CFS_SEEK_CUR);
+      cfs_write(fd,&addr,4);
+      //elfloader_output_write_segment(output,(char*) &addr, 4);
+      PRINTF("%p: addr: %p\n", sectionaddr +rela->r_offset,
+	     addr);
+    }
+    break;
+  case R_ARM_THM_CALL:
+    {
+      uint16_t instr[2];
+      int32_t offset;
+      char *base;
+      cfs_read(fd, (char*)instr, 4);
+      cfs_seek(fd, -4, CFS_SEEK_CUR);
+      /* Ignore the addend since it will be zero for calls to symbols,
+	 and I can't think of a case when doing a relative call to
+	 a non-symbol position */
+      base = sectionaddr + (rela->r_offset + 4);
+
+      if (((instr[1]) & 0xe800) == 0xe800) {
+	/* BL or BLX */
+	if (((uint32_t)addr) & 0x1) {
+	  /* BL */
+	  instr[1] |= 0x1800;
+	} else {
+#if defined(__ARM_ARCH_4T__)
+	  return ELFLOADER_UNHANDLED_RELOC;
+#else
+	  /* BLX */
+	  instr[1] &= ~0x1800;
+	  instr[1] |= 0x0800;
+#endif
+	}
+      }
+      /* Adjust address for BLX */
+      if ((instr[1] & 0x1800) == 0x0800) {
+	addr = (char*)((((uint32_t)addr) & 0xfffffffd)
+		       | (((uint32_t)base) & 0x00000002));
+      }
+      offset = addr -  (sectionaddr + (rela->r_offset + 4));
+      PRINTF("elfloader-arm.c: offset %d\n", (int)offset);
+      if (offset < -(1<<22) || offset >= (1<<22)) {
+	PRINTF("elfloader-arm.c: offset %d too large for relative call\n",
+	       (int)offset);
+      }
+    /*   PRINTF("%p: %04x %04x  offset: %d addr: %p\n", sectionaddr +rela->r_offset, instr[0], instr[1], (int)offset, addr);  */
+      instr[0] = (instr[0] & 0xf800) | ((offset>>12)&0x07ff);
+      instr[1] = (instr[1] & 0xf800) | ((offset>>1)&0x07ff);
+      cfs_write(fd,&instr,4);
+      //elfloader_output_write_segment(output, (char*)instr, 4);
+  /*     PRINTF("cfs_write: %04x %04x\n",instr[0], instr[1]);  */
+    }
+    break;
+    
+  default:
+    PRINTF("elfloader-arm.c: unsupported relocation type %d\n", type);
+  }
+}

cpu/stm32w108/hal/micro/cortexm3/stm32w108/gnu.ld

@@ -13,7 +13,7 @@ GROUP(
 These are used by the startup in order to allocate stacks for the different modes.
 */
 
-__Stack_Size = 0x400 ;
+__Stack_Size = 0x500 ;
 
 PROVIDE ( _Stack_Size = __Stack_Size ) ;
 
@@ -28,7 +28,6 @@ There will be a link error if there is not this amount of RAM free at the end.
 _Minimum_Stack_Size = 0x500 ;
 
 
-
 /*
 this sends all unreferenced IRQHandlers to reset
 */
@@ -114,13 +113,24 @@ SECTIONS
         *(.rodata*)
         *(.glue_7)
         *(.glue_7t)
-
+        . = ALIGN(1024);
-	    . = ALIGN(4);
+    	*(.elf_text)
+    	. = ALIGN(1024);
+	/*. = ALIGN(4);*/
    	 _etext = .;
-	    /* This is used by the startup in order to initialize the .data secion */
+	    /* This is used by the startup in order to initialize the .data section */
    	 _sidata = _etext;
     } >ROM_region
     
+    .coffee 0x08010000 :
+    {
+    	_coffee_start = ABSOLUTE(.);
+    	. = ALIGN(1024);
+    	*(.coffeefiles)
+    	. = ORIGIN(NVM_region) - _coffee_start;
+    } > ROM_region = 0x00
+
+    
     NVM (NOLOAD):
     {
       . = ALIGN(1024);
@@ -136,12 +146,6 @@ SECTIONS
       . = ALIGN(4);
     } > FIB_region
 
-/*
-    .FAT (NOLOAD):
-    {
-      KEEP(*(.FAT))
-    } > FIB_region
-*/
     /* after that it's only debugging information. */
     
 
@@ -152,7 +156,7 @@ SECTIONS
     .data  : AT ( _sidata )
     {
 	    . = ALIGN(4);
-        /* This is used by the startup in order to initialize the .data secion */
+        /* This is used by the startup in order to initialize the .data section */
         _sdata = . ;
         
         *(.data)
@@ -161,10 +165,10 @@ SECTIONS
 	    . = ALIGN(4);
 	    /* This is used by the startup in order to initialize the .data secion */
    	 _edata = . ;
+   	 ASSERT(_sidata + SIZEOF(.data) < LOADADDR(.coffee), ".data section overflow in ROM");
     } >RAM_region
     
 
-
     /* This is the uninitialized data section */
     .bss :
     {