changed usart code to handle LPM3

This commit is contained in:
joxe 2008-09-18 17:59:27 +00:00
parent 5d860b1df2
commit 8748230ead

View File

@ -26,7 +26,7 @@
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)$Id: uart1.c,v 1.6 2008/07/03 23:59:20 adamdunkels Exp $
* @(#)$Id: uart1.c,v 1.7 2008/09/18 17:59:27 joxe Exp $
*/
/*
@ -118,24 +118,34 @@ uart1_init(unsigned long ubr)
UCTL1 &= ~SWRST;
/* XXX Clear pending interrupts before enable!!! */
U1TCTL |= URXSE;
IE2 |= URXIE1; /* Enable USART1 RX interrupt */
}
/*---------------------------------------------------------------------------*/
interrupt(UART1RX_VECTOR)
uart1_interrupt(void)
{
ENERGEST_ON(ENERGEST_TYPE_IRQ);
/* Check status register for receive errors. */
if(URCTL1 & RXERR) {
volatile unsigned dummy;
dummy = RXBUF1; /* Clear error flags by forcing a dummy read. */
if (!(URXIFG1 & IFG2)) {
/* Edge detect if IFG not set? */
U1TCTL &= ~URXSE; /* Clear the URXS signal */
U1TCTL |= URXSE; /* Re-enable URXS - needed here?*/
LPM4_EXIT;
} else {
/* Check status register for receive errors. */
if(URCTL1 & RXERR) {
volatile unsigned dummy;
dummy = RXBUF1; /* Clear error flags by forcing a dummy read. */
} else {
if(uart1_input_handler != NULL) {
if(uart1_input_handler(RXBUF1)) {
LPM4_EXIT;
}
}
}
}
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
}