Updated instructions

This commit is contained in:
adamdunkels 2007-11-06 19:57:41 +00:00
parent 5a544c2c8a
commit b5241dc609

View File

@ -4,7 +4,7 @@ available in the handouts/ directory and at the Contiki website:
http://www.sics.se/contiki/
* INSTALLATION
* INSTALLATION INSTRUCTIONS
Cygwin and Java (JRE) needs to be installed. The demo has been tested
on Microsoft Windows, but probably works under Linux too.
@ -36,6 +36,15 @@ Step 7: Upload Contiki to the node:
make upload-node-42
This takes some time. The red LED should be lit when the
uploading is finished. We have found that in some cases brand
new Tmote Sky boards seem to cause a problem with Contiki and
the red LED does not light up. If so, try to wait a few
minutes (~10 minutes) with the Tmote Sky either inserted in
the PC, or powered with batteries. If the red LED goes on
after these minutes, repeat the "make upload-node-XX" to
upload Contiki again.
Step 8: Remove the Tmote Sky from the PC.
Step 9: Insert batteries into the Tmote Sky. The red LED should light
@ -45,7 +54,7 @@ Step 10: Repeat step 6 to step 9 for all non-sink nodes. Replace "make
upload-node-42" with "make upload-node-43", "make
upload-node-44", and so on.
Step 11: Insert the sink node to the PC
Step 11: Insert the sink node to the PC again.
Step 12: Run the Java program:
@ -53,7 +62,11 @@ Step 12: Run the Java program:
NOTE: this uses the first Tmote Sky it finds as a
sink. Therefore, make sure that only one Tmote Sky (the sink) is
inserted.
inserted.
Step 13: Push the "user" button on the Tmote Skys and watch their
power consumption go up and down.
* DEMO DESCRIPTION