mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-07-12 11:29:03 +00:00
flash and burn
completely untested.
This commit is contained in:
Mariano Alvira
parent
102149cd91
commit
c0b912dca2
1
Makefile
1
Makefile
@ -60,6 +60,7 @@ ALL = $(TESTS:.c=.srec) $(TESTS:.c=.bin) $(TESTS:.c=.dis)
|
||||
|
||||
all: src/start.o src/isr.o $(ALL)
|
||||
|
||||
tests/flasher.obj: src/maca.o src/nvm.o
|
||||
tests/nvm-read.obj: src/maca.o src/nvm.o
|
||||
tests/nvm-write.obj: src/maca.o src/nvm.o
|
||||
tests/rftest-rx.obj: src/maca.o src/nvm.o
|
||||
|
||||
@ -7,11 +7,13 @@ use Getopt::Long;
|
||||
use strict;
|
||||
|
||||
my $filename = '';
|
||||
my $second = '';
|
||||
my $term = '/dev/ttyUSB0';
|
||||
my $baud = '115200';
|
||||
my $verbose;
|
||||
|
||||
GetOptions ('file=s' => \$filename,
|
||||
GetOptions ('file=s' => \$filename,
|
||||
'secondfile=s' => \$second,
|
||||
'terminal=s' => \$term,
|
||||
'verbose' => \$verbose,
|
||||
'baud=s' => \$baud);
|
||||
@ -20,7 +22,9 @@ $| = 1;
|
||||
|
||||
if($filename eq '') {
|
||||
print "Example usage: mc1322x-load.pl -f foo.bin -t /dev/ttyS0 -b 9600\n";
|
||||
print " or : mc1322x-load.pl -f flasher.bin -s flashme.bin\n";
|
||||
print " -f required: binary file to load\n";
|
||||
print " -s optional: secondary binary file to send\n";
|
||||
print " -t default: /dev/ttyUSB0\n";
|
||||
print " -b default: 115200\n";
|
||||
exit;
|
||||
@ -29,7 +33,7 @@ if($filename eq '') {
|
||||
my $ob = Device::SerialPort->new ($term) or die "Can't start $term\n";
|
||||
# next test will die at runtime unless $ob
|
||||
|
||||
$baud = 115200 if (!defined($baud));
|
||||
if(($filename eq '')) die "you must specify a file with -f\n";
|
||||
|
||||
$ob->baudrate($baud);
|
||||
$ob->parity('none');
|
||||
@ -37,36 +41,55 @@ $ob->databits(8);
|
||||
$ob->stopbits(1);
|
||||
$ob->handshake("rts");
|
||||
|
||||
my $c;
|
||||
my $s = 0;
|
||||
|
||||
$ob->write(pack('C','0'));
|
||||
SEND:
|
||||
do {
|
||||
|
||||
my $c;
|
||||
|
||||
my $ret = '';
|
||||
until($ret eq 'CONNECT') {
|
||||
$c = $ob->input;
|
||||
$ret .= $c;
|
||||
}
|
||||
print $ret . "\n";
|
||||
if($s == 1) { print "performing secondary send\n"; }
|
||||
|
||||
$ob->write(pack('C','0'));
|
||||
|
||||
my $ret = '';
|
||||
my $test;
|
||||
|
||||
if($s == 1) {
|
||||
$test = 'ready';
|
||||
} else {
|
||||
$test = 'CONNECT';
|
||||
}
|
||||
|
||||
if (defined $filename) {
|
||||
until($ret eq $test) {
|
||||
$c = $ob->input;
|
||||
$ret .= $c;
|
||||
}
|
||||
print $ret . "\n";
|
||||
|
||||
|
||||
if (defined $filename) {
|
||||
|
||||
my $size = -s $filename;
|
||||
|
||||
print ("Size: $size bytes\n");
|
||||
$ob->write(pack('V',$size));
|
||||
|
||||
open(FILE, $filename) or die($!);
|
||||
print "Sending $filename\n";
|
||||
|
||||
my $i = 1;
|
||||
while(read(FILE, $c, 1)) {
|
||||
print unpack('H',$c) . unpack('h',$c) if $verbose;
|
||||
print "\n" if ($verbose && ($i%4==0));
|
||||
$i++;
|
||||
select undef, undef, undef, 0.001;
|
||||
$ob->write($c);
|
||||
}
|
||||
}
|
||||
|
||||
my $size = -s $filename;
|
||||
|
||||
print ("Size: $size bytes\n");
|
||||
$ob->write(pack('V',$size));
|
||||
|
||||
open(FILE, $filename) or die($!);
|
||||
print "Sending $filename\n";
|
||||
|
||||
my $i = 1;
|
||||
while(read(FILE, $c, 1)) {
|
||||
print unpack('H',$c) . unpack('h',$c) if $verbose;
|
||||
print "\n" if ($verbose && ($i%4==0));
|
||||
$i++;
|
||||
select undef, undef, undef, 0.001;
|
||||
$ob->write($c);
|
||||
}
|
||||
if(-e $second) {$s=1; $filename = $second; continue SEND; }
|
||||
|
||||
}
|
||||
|
||||
print "done.\n";
|
||||
|
||||
165
tests/flasher.c
Normal file
165
tests/flasher.c
Normal file
@ -0,0 +1,165 @@
|
||||
#define GPIO_FUNC_SEL0 0x80000018 /* GPIO 15 - 0; 2 bit blocks */
|
||||
|
||||
#define BASE_UART1 0x80005000
|
||||
#define UART1_CON 0x80005000
|
||||
#define UART1_STAT 0x80005004
|
||||
#define UART1_DATA 0x80005008
|
||||
#define UR1CON 0x8000500c
|
||||
#define UT1CON 0x80005010
|
||||
#define UART1_CTS 0x80005014
|
||||
#define UART1_BR 0x80005018
|
||||
|
||||
#define GPIO_PAD_DIR0 0x80000000
|
||||
#define GPIO_DATA0 0x80000008
|
||||
|
||||
#include "embedded_types.h"
|
||||
#include "nvm.h"
|
||||
#include "maca.h"
|
||||
|
||||
#define reg(x) (*(volatile uint32_t *)(x))
|
||||
|
||||
#define DELAY 400000
|
||||
|
||||
void putc(uint8_t c);
|
||||
void puts(uint8_t *s);
|
||||
void put_hex(uint8_t x);
|
||||
void put_hex16(uint16_t x);
|
||||
void put_hex32(uint32_t x);
|
||||
uint8_t getc();
|
||||
|
||||
const uint8_t hex[16]={'0','1','2','3','4','5','6','7',
|
||||
'8','9','a','b','c','d','e','f'};
|
||||
|
||||
#include "isr.h"
|
||||
|
||||
#define NBYTES 8
|
||||
#define WRITE_ADDR 0x1e000
|
||||
//#define WRITE_ADDR 0x0
|
||||
#define WRITEVAL0 0x00000001
|
||||
#define WRITEVAL1 0x00000000
|
||||
|
||||
__attribute__ ((section ("startup")))
|
||||
void main(void) {
|
||||
nvmType_t type=0;
|
||||
nvmErr_t err;
|
||||
uint8_t c;
|
||||
uint32_t buf[NBYTES/4];
|
||||
uint32_t i;
|
||||
uint32_t len=0;
|
||||
|
||||
*(volatile uint32_t *)GPIO_PAD_DIR0 = 0x00000100;
|
||||
|
||||
/* Restore UART regs. to default */
|
||||
/* in case there is still bootloader state leftover */
|
||||
|
||||
reg(UART1_CON) = 0x0000c800; /* mask interrupts, 16 bit sample --- helps explain the baud rate */
|
||||
|
||||
/* INC = 767; MOD = 9999 works: 115200 @ 24 MHz 16 bit sample */
|
||||
#define INC 767
|
||||
#define MOD 9999
|
||||
reg(UART1_BR) = INC<<16 | MOD;
|
||||
|
||||
/* see Section 11.5.1.2 Alternate Modes */
|
||||
/* you must enable the peripheral first BEFORE setting the function in GPIO_FUNC_SEL */
|
||||
/* From the datasheet: "The peripheral function will control operation of the pad IF */
|
||||
/* THE PERIPHERAL IS ENABLED. */
|
||||
reg(UART1_CON) = 0x00000003; /* enable receive and transmit */
|
||||
reg(GPIO_FUNC_SEL0) = ( (0x01 << (14*2)) | (0x01 << (15*2)) ); /* set GPIO15-14 to UART (UART1 TX and RX)*/
|
||||
|
||||
vreg_init();
|
||||
|
||||
// puts("CRM status: 0x");
|
||||
// put_hex32(reg(0x80003018));
|
||||
// puts("\n\r");
|
||||
|
||||
puts("Detecting internal nvm\n\r");
|
||||
|
||||
err = nvm_detect(gNvmInternalInterface_c, &type);
|
||||
|
||||
puts("nvm_detect returned: 0x");
|
||||
put_hex(err);
|
||||
puts(" type is: 0x");
|
||||
put_hex32(type);
|
||||
puts("\n\r");
|
||||
|
||||
|
||||
/* erase the flash */
|
||||
err = nvm_erase(gNvmInternalInterface_c, type, 0x4fffffff);
|
||||
puts("nvm_erase returned: 0x");
|
||||
put_hex(err);
|
||||
puts("\n\r");
|
||||
|
||||
/* say we are ready */
|
||||
ready:
|
||||
len = 0;
|
||||
puts("ready");
|
||||
|
||||
/* read the length */
|
||||
for(i=0; i<4; i++) {
|
||||
c = getc();
|
||||
/* bail if the first byte of the length is zero */
|
||||
if((i==0) && (c==0)) goto ready;
|
||||
len += (len<<(i*8));
|
||||
puts("len: ");
|
||||
put_hex32(len);
|
||||
puts("\n\r");
|
||||
}
|
||||
|
||||
/* write the OKOK magic */
|
||||
buf[0] = 'O'; buf[1] = 'K'; buf[2] = 'O'; buf[3] = 'K';
|
||||
err = nvm_write(gNvmInternalInterface_c, type, (uint8_t *)buf, 0, 4);
|
||||
|
||||
/* read a byte, write a byte */
|
||||
/* byte at a time will make this work as a contiki process better */
|
||||
/* for OTAP */
|
||||
for(i=0; i<len; i++) {
|
||||
c = getc();
|
||||
err = nvm_write(gNvmInternalInterface_c, type, &c, 4+i, 1);
|
||||
}
|
||||
|
||||
puts("flasher done\n\r");
|
||||
|
||||
while(1) {continue;};
|
||||
}
|
||||
|
||||
uint8_t getc()
|
||||
{
|
||||
uint8_t c;
|
||||
while(reg(UR1CON) == 0) {
|
||||
/* Receive buffer isn't empty */
|
||||
/* read a byte and write it to the transmit buffer */
|
||||
c = reg(UART1_DATA);
|
||||
return c;
|
||||
}
|
||||
}
|
||||
|
||||
void putc(uint8_t c) {
|
||||
while(reg(UT1CON)==31); /* wait for there to be room in the buffer */
|
||||
reg(UART1_DATA) = c;
|
||||
}
|
||||
|
||||
void puts(uint8_t *s) {
|
||||
while(s && *s!=0) {
|
||||
putc(*s++);
|
||||
}
|
||||
}
|
||||
|
||||
void put_hex(uint8_t x)
|
||||
{
|
||||
putc(hex[x >> 4]);
|
||||
putc(hex[x & 15]);
|
||||
}
|
||||
|
||||
void put_hex16(uint16_t x)
|
||||
{
|
||||
put_hex((x >> 8) & 0xFF);
|
||||
put_hex((x) & 0xFF);
|
||||
}
|
||||
|
||||
void put_hex32(uint32_t x)
|
||||
{
|
||||
put_hex((x >> 24) & 0xFF);
|
||||
put_hex((x >> 16) & 0xFF);
|
||||
put_hex((x >> 8) & 0xFF);
|
||||
put_hex((x) & 0xFF);
|
||||
}
|
||||
Loading…
Reference in New Issue
Block a user