Merge pull request #1173 from bkozak-scanimetrics/cc26xx_enable_bad_crc_debug

CC26xx - Enable RX_NOK on DEBUG builds
This commit is contained in:
George Oikonomou 2015-08-03 10:22:42 +01:00
commit ca5a4db919

View File

@ -92,6 +92,12 @@
#define PRINTF(...)
#endif
/*---------------------------------------------------------------------------*/
#ifdef CC26XX_CONF_DEBUG_CRC
#define CC26XX_DEBUG_CRC CC26XX_CONF_DEBUG_CRC
#else /* CC26XX_CONF_DEBUG_CRC */
#define CC26XX_DEBUG_CRC DEBUG
#endif /* CC26XX_CONF_DEBUG_CRC */
/*---------------------------------------------------------------------------*/
/* Data entry status field constants */
#define DATA_ENTRY_STATUS_PENDING 0x00 /* Not in use by the Radio CPU */
#define DATA_ENTRY_STATUS_ACTIVE 0x01 /* Open for r/w by the radio CPU */
@ -266,11 +272,16 @@ const output_config_t *tx_power_current = &output_power[0];
/*---------------------------------------------------------------------------*/
/* RF interrupts */
#define RX_IRQ IRQ_IEEE_RX_ENTRY_DONE
#define RX_NOK_IRQ IRQ_IEEE_RX_NOK
#define TX_ACK_IRQ IRQ_IEEE_TX_ACK
#define ERROR_IRQ IRQ_INTERNAL_ERROR
/* Those IRQs are enabled all the time */
#define ENABLED_IRQS (RX_IRQ + ERROR_IRQ)
#if CC26XX_DEBUG_CRC
#define ENABLED_IRQS (RX_IRQ | ERROR_IRQ | RX_NOK_IRQ)
#else
#define ENABLED_IRQS (RX_IRQ | ERROR_IRQ)
#endif
/*
* We only enable this right before starting frame TX, so we can sleep while
@ -1055,6 +1066,13 @@ rx_isr(void)
process_poll(&cc26xx_rf_process);
}
/*---------------------------------------------------------------------------*/
static void
rx_nok_isr(void)
{
RIMESTATS_ADD(badcrc);
PRINTF("RF: Bad CRC\n");
}
/*---------------------------------------------------------------------------*/
void
cc26xx_rf_cpe1_isr(void)
{
@ -1093,7 +1111,11 @@ cc26xx_rf_cpe0_isr(void)
if(HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIFG) & RX_IRQ) {
rx_isr();
}
if(CC26XX_DEBUG_CRC) {
if(HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIFG) & RX_NOK_IRQ) {
rx_nok_isr();
}
}
/* Clear interrupt flags */
HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIFG) = 0x0;
ti_lib_int_master_enable();