Apple-2-SW/contiki
1
0
Fork 0
mirror of https://github.com/oliverschmidt/contiki.git synced 2024-10-02 04:54:42 +00:00
Code Issues Projects Releases Wiki Activity

x86: Streamline MMIO accesses in GPIO and I2C drivers

Browse Source 
This patch refactors the MMIO routines in the GPIO and I2C drivers to
eliminate the base_addr parameter that specifies the MMIO base
address.  Instead, just the MMIO routines themselves retrieve the base
address from the driver structure.
This commit is contained in:
Michael LeMay 2015-10-23 09:34:17 -07:00 committed by Jesus Sanchez-Palencia
parent f85654a82f
commit e297177a69
2 changed files with 100 additions and 94 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

56
cpu/x86/drivers/quarkX1000/gpio.c
View File

@ -60,29 +60,31 @@ struct gpio_internal_data {
static struct gpio_internal_data data;
static inline uint32_t
read(uint32_t base_addr, uint32_t offset)
read(uint32_t offset)
{
return *(uint32_t*)(base_addr + offset);
uint32_t res;
PCI_MMIO_READL(data.pci, res, offset);
return res;
}
static inline void
write(uint32_t base_addr, uint32_t offset, uint32_t val)
write(uint32_t offset, uint32_t val)
{
*(uint32_t*)(base_addr + offset) = val;
PCI_MMIO_WRITEL(data.pci, offset, val);
}
/* value must be 0x0 or 0x1 */
static void
set_bit(uint32_t base_addr, uint32_t offset, uint32_t bit, uint32_t value)
set_bit(uint32_t offset, uint32_t bit, uint32_t value)
{
uint32_t reg;
reg = read(base_addr, offset);
reg = read(offset);
reg &= ~BIT(bit);
reg |= value << bit;
write(base_addr, offset, reg);
write(offset, reg);
}
static void
@ -90,37 +92,37 @@ gpio_isr(void)
{
uint32_t int_status;
int_status = read(data.pci.mmio, INTSTATUS);
int_status = read(INTSTATUS);
if (data.callback)
data.callback(int_status);
write(data.pci.mmio, PORTA_EOI, -1);
write(PORTA_EOI, -1);
}
static void
gpio_interrupt_config(uint8_t pin, int flags)
{
/* set as input */
set_bit(data.pci.mmio, SWPORTA_DDR, pin, 0);
set_bit(SWPORTA_DDR, pin, 0);
/* set interrupt enabled */
set_bit(data.pci.mmio, INTEN, pin, 1);
set_bit(INTEN, pin, 1);
/* unmask interrupt */
set_bit(data.pci.mmio, INTMASK, pin, 0);
set_bit(INTMASK, pin, 0);
/* set active high/low */
set_bit(data.pci.mmio, INT_POLARITY, pin, !!(flags & QUARKX1000_GPIO_ACTIVE_HIGH));
set_bit(INT_POLARITY, pin, !!(flags & QUARKX1000_GPIO_ACTIVE_HIGH));
/* set level/edge */
set_bit(data.pci.mmio, INTTYPE_LEVEL, pin, !!(flags & QUARKX1000_GPIO_EDGE));
set_bit(INTTYPE_LEVEL, pin, !!(flags & QUARKX1000_GPIO_EDGE));
/* set debounce */
set_bit(data.pci.mmio, DEBOUNCE, pin, !!(flags & QUARKX1000_GPIO_DEBOUNCE));
set_bit(DEBOUNCE, pin, !!(flags & QUARKX1000_GPIO_DEBOUNCE));
/* set clock synchronous */
set_bit(data.pci.mmio, LS_SYNC, 0, !!(flags & QUARKX1000_GPIO_CLOCK_SYNC));
set_bit(LS_SYNC, 0, !!(flags & QUARKX1000_GPIO_CLOCK_SYNC));
}
int
@ -135,10 +137,10 @@ quarkX1000_gpio_config(uint8_t pin, int flags)
gpio_interrupt_config(pin, flags);
} else {
/* set direction */
set_bit(data.pci.mmio, SWPORTA_DDR, pin, !!(flags & QUARKX1000_GPIO_OUT));
set_bit(SWPORTA_DDR, pin, !!(flags & QUARKX1000_GPIO_OUT));
/* set interrupt disabled */
set_bit(data.pci.mmio, INTEN, pin, 0);
set_bit(INTEN, pin, 0);
}
return 0;
@ -161,7 +163,7 @@ quarkX1000_gpio_config_port(int flags)
int
quarkX1000_gpio_read(uint8_t pin, uint8_t *value)
{
uint32_t value32 = read(data.pci.mmio, EXT_PORTA);
uint32_t value32 = read(EXT_PORTA);
*value = !!(value32 & BIT(pin));
return 0;
@ -170,14 +172,14 @@ quarkX1000_gpio_read(uint8_t pin, uint8_t *value)
int
quarkX1000_gpio_write(uint8_t pin, uint8_t value)
{
set_bit(data.pci.mmio, SWPORTA_DR, pin, !!value);
set_bit(SWPORTA_DR, pin, !!value);
return 0;
}
int
quarkX1000_gpio_read_port(uint8_t *value)
{
uint32_t value32 = read(data.pci.mmio, EXT_PORTA);
uint32_t value32 = read(EXT_PORTA);
*value = value32 & ~0xFFFFFF00;
return 0;
@ -186,7 +188,7 @@ quarkX1000_gpio_read_port(uint8_t *value)
int
quarkX1000_gpio_write_port(uint8_t value)
{
write(data.pci.mmio, SWPORTA_DR, value);
write(SWPORTA_DR, value);
return 0;
}
@ -200,13 +202,13 @@ quarkX1000_gpio_set_callback(quarkX1000_gpio_callback callback)
void
quarkX1000_gpio_clock_enable(void)
{
set_bit(data.pci.mmio, LS_SYNC, 0, 1);
set_bit(LS_SYNC, 0, 1);
}
void
quarkX1000_gpio_clock_disable(void)
{
set_bit(data.pci.mmio, LS_SYNC, 0, 0);
set_bit(LS_SYNC, 0, 0);
}
static void
@ -244,9 +246,9 @@ quarkX1000_gpio_init(void)
quarkX1000_gpio_clock_enable();
/* clear registers */
write(data.pci.mmio, INTEN, 0);
write(data.pci.mmio, INTMASK, 0);
write(data.pci.mmio, PORTA_EOI, 0);
write(INTEN, 0);
write(INTMASK, 0);
write(PORTA_EOI, 0);
pic_unmask_irq(GPIO_IRQ);

138
cpu/x86/drivers/quarkX1000/i2c.c
View File

@ -75,21 +75,23 @@ struct i2c_internal_data {
static struct i2c_internal_data device;
static uint32_t
read(uint32_t base_addr, uint32_t offset)
read(uint32_t offset)
{
return *(uint32_t*)(base_addr + offset);
uint32_t res;
PCI_MMIO_READL(device.pci, res, offset);
return res;
}
static void
write(uint32_t base_addr, uint32_t offset, uint32_t val)
write(uint32_t offset, uint32_t val)
{
*(uint32_t*)(base_addr + offset) = val;
PCI_MMIO_WRITEL(device.pci, offset, val);
}
static uint32_t
get_value(uint32_t base_addr, uint32_t offset, uint32_t mask, uint32_t shift)
get_value(uint32_t offset, uint32_t mask, uint32_t shift)
{
uint32_t register_value = *(uint32_t*)(base_addr + offset);
uint32_t register_value = read(offset);
register_value &= ~(0xFFFFFFFF - mask);
@ -97,12 +99,14 @@ get_value(uint32_t base_addr, uint32_t offset, uint32_t mask, uint32_t shift)
}
static void
set_value(uint32_t base_addr, uint32_t offset, uint32_t mask, uint32_t shift, uint32_t value)
set_value(uint32_t offset, uint32_t mask, uint32_t shift, uint32_t value)
{
volatile uint32_t *register_value = (volatile uint32_t*)(base_addr + offset);
uint32_t register_value = read(offset);
*register_value &= ~mask;
*register_value |= value << shift;
register_value &= ~mask;
register_value |= value << shift;
write(offset, register_value);
}
static void
@ -113,14 +117,14 @@ i2c_data_read(void)
if (device.rx_len == 0)
return;
rx_cnt = get_value(device.pci.mmio, QUARKX1000_IC_RXFLR,
rx_cnt = get_value(QUARKX1000_IC_RXFLR,
QUARKX1000_IC_RXFLR_MASK, QUARKX1000_IC_RXFLR_SHIFT);
if (rx_cnt > device.rx_len)
rx_cnt = device.rx_len;
for (i = 0; i < rx_cnt; i++) {
device.rx_buffer[i] = get_value(device.pci.mmio, QUARKX1000_IC_DATA_CMD,
device.rx_buffer[i] = get_value(QUARKX1000_IC_DATA_CMD,
QUARKX1000_IC_DATA_CMD_DAT_MASK, QUARKX1000_IC_DATA_CMD_DAT_SHIFT);
}
@ -137,7 +141,7 @@ i2c_data_send(void)
if (device.rx_tx_len == 0)
return;
tx_cnt = I2C_FIFO_DEPTH - get_value(device.pci.mmio, QUARKX1000_IC_TXFLR,
tx_cnt = I2C_FIFO_DEPTH - get_value(QUARKX1000_IC_TXFLR,
QUARKX1000_IC_TXFLR_MASK, QUARKX1000_IC_TXFLR_SHIFT);
if (tx_cnt > device.rx_tx_len)
@ -158,7 +162,7 @@ i2c_data_send(void)
data |= QUARKX1000_IC_DATA_CMD_STOP_MASK;
}
write(device.pci.mmio, QUARKX1000_IC_DATA_CMD, data);
write(QUARKX1000_IC_DATA_CMD, data);
device.rx_tx_len -= 1;
}
@ -168,11 +172,11 @@ i2c_data_send(void)
static void
i2c_isr(void)
{
if (read(device.pci.mmio, QUARKX1000_IC_INTR_STAT) & QUARKX1000_IC_INTR_STAT_STOP_DET_MASK) {
if (read(QUARKX1000_IC_INTR_STAT) & QUARKX1000_IC_INTR_STAT_STOP_DET_MASK) {
i2c_data_read();
write(device.pci.mmio, QUARKX1000_IC_INTR_MASK, 0);
read(device.pci.mmio, QUARKX1000_IC_CLR_INTR);
write(QUARKX1000_IC_INTR_MASK, 0);
read(QUARKX1000_IC_CLR_INTR);
if (device.direction == I2C_DIRECTION_WRITE) {
if (device.config.cb_tx)
@ -183,24 +187,24 @@ i2c_isr(void)
}
}
if (read(device.pci.mmio, QUARKX1000_IC_INTR_STAT) & QUARKX1000_IC_INTR_STAT_TX_EMPTY_MASK) {
if (read(QUARKX1000_IC_INTR_STAT) & QUARKX1000_IC_INTR_STAT_TX_EMPTY_MASK) {
i2c_data_send();
if (device.rx_tx_len <= 0) {
set_value(device.pci.mmio, QUARKX1000_IC_INTR_MASK,
set_value(QUARKX1000_IC_INTR_MASK,
QUARKX1000_IC_INTR_STAT_TX_EMPTY_MASK, QUARKX1000_IC_INTR_STAT_TX_EMPTY_SHIFT, 0);
set_value(device.pci.mmio, QUARKX1000_IC_INTR_MASK,
set_value(QUARKX1000_IC_INTR_MASK,
QUARKX1000_IC_INTR_STAT_STOP_DET_MASK, QUARKX1000_IC_INTR_STAT_STOP_DET_SHIFT, 1);
}
}
if (read(device.pci.mmio, QUARKX1000_IC_INTR_STAT) & QUARKX1000_IC_INTR_STAT_RX_FULL_MASK)
if (read(QUARKX1000_IC_INTR_STAT) & QUARKX1000_IC_INTR_STAT_RX_FULL_MASK)
i2c_data_read();
if (read(device.pci.mmio, QUARKX1000_IC_INTR_STAT) & (QUARKX1000_IC_INTR_STAT_TX_ABRT_MASK
if (read(QUARKX1000_IC_INTR_STAT) & (QUARKX1000_IC_INTR_STAT_TX_ABRT_MASK
| QUARKX1000_IC_INTR_STAT_TX_OVER_MASK | QUARKX1000_IC_INTR_STAT_RX_OVER_MASK
| QUARKX1000_IC_INTR_STAT_RX_UNDER_MASK)) {
write(device.pci.mmio, QUARKX1000_IC_INTR_MASK, 0);
read(device.pci.mmio, QUARKX1000_IC_CLR_INTR);
write(QUARKX1000_IC_INTR_MASK, 0);
read(QUARKX1000_IC_CLR_INTR);
if (device.config.cb_err)
device.config.cb_err();
@ -227,7 +231,7 @@ quarkX1000_i2c_configure(struct quarkX1000_i2c_config *config)
hcnt = I2C_FS_HCNT;
}
ic_fs_spklen = get_value(device.pci.mmio, QUARKX1000_IC_FS_SPKLEN,
ic_fs_spklen = get_value(QUARKX1000_IC_FS_SPKLEN,
QUARKX1000_IC_FS_SPKLEN_MASK, QUARKX1000_IC_FS_SPKLEN_SHIFT);
/* We adjust the Low Count and High Count based on the Spike Suppression Limit */
@ -235,7 +239,7 @@ quarkX1000_i2c_configure(struct quarkX1000_i2c_config *config)
device.hcnt = (hcnt < (ic_fs_spklen + I2C_FS_SPKLEN_HCNT_OFFSET)) ? ic_fs_spklen + I2C_FS_SPKLEN_HCNT_OFFSET : hcnt;
/* Clear interrupts. */
read(device.pci.mmio, QUARKX1000_IC_CLR_INTR);
read(QUARKX1000_IC_CLR_INTR);
return 0;
}
@ -244,38 +248,38 @@ static int
i2c_setup(void)
{
/* Clear all values */
write(device.pci.mmio, QUARKX1000_IC_CON, 0);
write(QUARKX1000_IC_CON, 0);
/* Clear interrupts */
read(device.pci.mmio, QUARKX1000_IC_CLR_INTR);
read(QUARKX1000_IC_CLR_INTR);
/* Quark X1000 SoC I2C only supports master mode. */
set_value(device.pci.mmio, QUARKX1000_IC_CON,
set_value(QUARKX1000_IC_CON,
QUARKX1000_IC_CON_MASTER_MODE_MASK, QUARKX1000_IC_CON_MASTER_MODE_SHIFT, 1);
/* Set restart enable */
set_value(device.pci.mmio, QUARKX1000_IC_CON,
set_value(QUARKX1000_IC_CON,
QUARKX1000_IC_CON_RESTART_EN_MASK, QUARKX1000_IC_CON_RESTART_EN_SHIFT, 1);
/* Set addressing mode */
if (device.config.addressing_mode == QUARKX1000_I2C_ADDR_MODE_10BIT) {
set_value(device.pci.mmio, QUARKX1000_IC_CON,
set_value(QUARKX1000_IC_CON,
QUARKX1000_IC_CON_10BITADDR_MASTER_MASK, QUARKX1000_IC_CON_10BITADDR_MASTER_SHIFT, 1);
}
if (device.config.speed == QUARKX1000_I2C_SPEED_STANDARD) {
set_value(device.pci.mmio, QUARKX1000_IC_SS_SCL_LCNT,
set_value(QUARKX1000_IC_SS_SCL_LCNT,
QUARKX1000_IC_SS_SCL_LCNT_MASK, QUARKX1000_IC_SS_SCL_LCNT_SHIFT, device.lcnt);
set_value(device.pci.mmio, QUARKX1000_IC_SS_SCL_HCNT,
set_value(QUARKX1000_IC_SS_SCL_HCNT,
QUARKX1000_IC_SS_SCL_HCNT_MASK, QUARKX1000_IC_SS_SCL_HCNT_SHIFT, device.hcnt);
set_value(device.pci.mmio, QUARKX1000_IC_CON,
set_value(QUARKX1000_IC_CON,
QUARKX1000_IC_CON_SPEED_MASK, QUARKX1000_IC_CON_SPEED_SHIFT, 0x1);
} else {
set_value(device.pci.mmio, QUARKX1000_IC_FS_SCL_LCNT,
set_value(QUARKX1000_IC_FS_SCL_LCNT,
QUARKX1000_IC_FS_SCL_LCNT_MASK, QUARKX1000_IC_FS_SCL_LCNT_SHIFT, device.lcnt);
set_value(device.pci.mmio, QUARKX1000_IC_FS_SCL_HCNT,
set_value(QUARKX1000_IC_FS_SCL_HCNT,
QUARKX1000_IC_FS_SCL_HCNT_MASK, QUARKX1000_IC_FS_SCL_HCNT_SHIFT, device.hcnt);
set_value(device.pci.mmio, QUARKX1000_IC_CON,
set_value(QUARKX1000_IC_CON,
QUARKX1000_IC_CON_SPEED_MASK, QUARKX1000_IC_CON_SPEED_SHIFT, 0x2);
}
@ -293,19 +297,19 @@ i2c_operation_setup(uint8_t *write_buf, uint8_t write_len,
device.rx_tx_len = device.rx_len + device.tx_len;
/* Disable controller */
set_value(device.pci.mmio, QUARKX1000_IC_ENABLE,
set_value(QUARKX1000_IC_ENABLE,
QUARKX1000_IC_ENABLE_MASK, QUARKX1000_IC_ENABLE_SHIFT, 0);
i2c_setup();
/* Disable interrupts */
write(device.pci.mmio, QUARKX1000_IC_INTR_MASK, 0);
write(QUARKX1000_IC_INTR_MASK, 0);
/* Clear interrupts */
read(device.pci.mmio, QUARKX1000_IC_CLR_INTR);
read(QUARKX1000_IC_CLR_INTR);
/* Set address of target slave */
set_value(device.pci.mmio, QUARKX1000_IC_TAR,
set_value(QUARKX1000_IC_TAR,
QUARKX1000_IC_TAR_MASK, QUARKX1000_IC_TAR_SHIFT, addr);
}
@ -314,29 +318,29 @@ static int
i2c_operation(uint8_t *write_buf, uint8_t write_len,
uint8_t *read_buf, uint8_t read_len, uint16_t addr)
{
if (read(device.pci.mmio, QUARKX1000_IC_STATUS) & QUARKX1000_IC_STATUS_ACTIVITY_MASK)
if (read(QUARKX1000_IC_STATUS) & QUARKX1000_IC_STATUS_ACTIVITY_MASK)
return -1;
i2c_operation_setup(write_buf, write_len, read_buf, read_len, addr);
/* Enable master TX and RX interrupts */
set_value(device.pci.mmio, QUARKX1000_IC_INTR_MASK,
set_value(QUARKX1000_IC_INTR_MASK,
QUARKX1000_IC_INTR_STAT_TX_OVER_MASK, QUARKX1000_IC_INTR_STAT_TX_OVER_SHIFT, 1);
set_value(device.pci.mmio, QUARKX1000_IC_INTR_MASK,
set_value(QUARKX1000_IC_INTR_MASK,
QUARKX1000_IC_INTR_STAT_TX_EMPTY_MASK, QUARKX1000_IC_INTR_STAT_TX_EMPTY_SHIFT, 1);
set_value(device.pci.mmio, QUARKX1000_IC_INTR_MASK,
set_value(QUARKX1000_IC_INTR_MASK,
QUARKX1000_IC_INTR_STAT_TX_ABRT_MASK, QUARKX1000_IC_INTR_STAT_TX_ABRT_SHIFT, 1);
set_value(device.pci.mmio, QUARKX1000_IC_INTR_MASK,
set_value(QUARKX1000_IC_INTR_MASK,
QUARKX1000_IC_INTR_STAT_RX_UNDER_MASK, QUARKX1000_IC_INTR_STAT_RX_UNDER_SHIFT, 1);
set_value(device.pci.mmio, QUARKX1000_IC_INTR_MASK,
set_value(QUARKX1000_IC_INTR_MASK,
QUARKX1000_IC_INTR_STAT_RX_OVER_MASK, QUARKX1000_IC_INTR_STAT_RX_OVER_SHIFT, 1);
set_value(device.pci.mmio, QUARKX1000_IC_INTR_MASK,
set_value(QUARKX1000_IC_INTR_MASK,
QUARKX1000_IC_INTR_STAT_RX_FULL_MASK, QUARKX1000_IC_INTR_STAT_RX_FULL_SHIFT, 1);
set_value(device.pci.mmio, QUARKX1000_IC_INTR_MASK,
set_value(QUARKX1000_IC_INTR_MASK,
QUARKX1000_IC_INTR_STAT_STOP_DET_MASK, QUARKX1000_IC_INTR_STAT_STOP_DET_SHIFT, 1);
/* Enable controller */
set_value(device.pci.mmio, QUARKX1000_IC_ENABLE,
set_value(QUARKX1000_IC_ENABLE,
QUARKX1000_IC_ENABLE_MASK, QUARKX1000_IC_ENABLE_SHIFT, 1);
return 0;
@ -364,33 +368,33 @@ i2c_polling_operation(uint8_t *write_buf, uint8_t write_len,
{
uint32_t start_time, intr_mask_stat;
if (!(read(device.pci.mmio, QUARKX1000_IC_CON) & QUARKX1000_IC_CON_MASTER_MODE_MASK))
if (!(read(QUARKX1000_IC_CON) & QUARKX1000_IC_CON_MASTER_MODE_MASK))
return -1;
/* Wait i2c idle */
start_time = clock_seconds();
while (read(device.pci.mmio, QUARKX1000_IC_STATUS) & QUARKX1000_IC_STATUS_ACTIVITY_MASK) {
while (read(QUARKX1000_IC_STATUS) & QUARKX1000_IC_STATUS_ACTIVITY_MASK) {
if ((clock_seconds() - start_time) > I2C_POLLING_TIMEOUT) {
return -1;
}
}
/* Get interrupt mask to restore in the end of polling operation */
intr_mask_stat = read(device.pci.mmio, QUARKX1000_IC_INTR_MASK);
intr_mask_stat = read(QUARKX1000_IC_INTR_MASK);
i2c_operation_setup(write_buf, write_len, read_buf, read_len, addr);
/* Enable controller */
set_value(device.pci.mmio, QUARKX1000_IC_ENABLE,
set_value(QUARKX1000_IC_ENABLE,
QUARKX1000_IC_ENABLE_MASK, QUARKX1000_IC_ENABLE_SHIFT, 1);
/* Transmit */
if (device.tx_len != 0) {
while (device.tx_len > 0) {
start_time = clock_seconds();
while (!(read(device.pci.mmio, QUARKX1000_IC_STATUS) & QUARKX1000_IC_STATUS_TFNF_MASK)) {
while (!(read(QUARKX1000_IC_STATUS) & QUARKX1000_IC_STATUS_TFNF_MASK)) {
if ((clock_seconds() - start_time) > I2C_POLLING_TIMEOUT) {
set_value(device.pci.mmio, QUARKX1000_IC_ENABLE,
set_value(QUARKX1000_IC_ENABLE,
QUARKX1000_IC_ENABLE_MASK, QUARKX1000_IC_ENABLE_SHIFT, 0);
return -1;
}
@ -399,9 +403,9 @@ i2c_polling_operation(uint8_t *write_buf, uint8_t write_len,
}
start_time = clock_seconds();
while (!(read(device.pci.mmio, QUARKX1000_IC_STATUS) & QUARKX1000_IC_STATUS_TFE_MASK)) {
while (!(read(QUARKX1000_IC_STATUS) & QUARKX1000_IC_STATUS_TFE_MASK)) {
if ((clock_seconds() - start_time) > I2C_POLLING_TIMEOUT) {
set_value(device.pci.mmio, QUARKX1000_IC_ENABLE,
set_value(QUARKX1000_IC_ENABLE,
QUARKX1000_IC_ENABLE_MASK, QUARKX1000_IC_ENABLE_SHIFT, 0);
return -1;
}
@ -414,9 +418,9 @@ i2c_polling_operation(uint8_t *write_buf, uint8_t write_len,
if (device.rx_len != 0) {
while (device.rx_len > 0) {
start_time = clock_seconds();
while (!(read(device.pci.mmio, QUARKX1000_IC_STATUS) & QUARKX1000_IC_STATUS_RFNE_MASK)) {
while (!(read(QUARKX1000_IC_STATUS) & QUARKX1000_IC_STATUS_RFNE_MASK)) {
if ((clock_seconds() - start_time) > I2C_POLLING_TIMEOUT) {
set_value(device.pci.mmio, QUARKX1000_IC_ENABLE,
set_value(QUARKX1000_IC_ENABLE,
QUARKX1000_IC_ENABLE_MASK, QUARKX1000_IC_ENABLE_SHIFT, 0);
return -1;
}
@ -427,31 +431,31 @@ i2c_polling_operation(uint8_t *write_buf, uint8_t write_len,
/* Stop Det */
start_time = clock_seconds();
while (!(read(device.pci.mmio, QUARKX1000_IC_RAW_INTR_STAT) & QUARKX1000_IC_INTR_STAT_STOP_DET_MASK)) {
while (!(read(QUARKX1000_IC_RAW_INTR_STAT) & QUARKX1000_IC_INTR_STAT_STOP_DET_MASK)) {
if ((clock_seconds() - start_time) > I2C_POLLING_TIMEOUT) {
set_value(device.pci.mmio, QUARKX1000_IC_ENABLE,
set_value(QUARKX1000_IC_ENABLE,
QUARKX1000_IC_ENABLE_MASK, QUARKX1000_IC_ENABLE_SHIFT, 0);
return -1;
}
}
read(device.pci.mmio, QUARKX1000_IC_CLR_STOP_DET);
read(QUARKX1000_IC_CLR_STOP_DET);
/* Wait i2c idle */
start_time = clock_seconds();
while (read(device.pci.mmio, QUARKX1000_IC_STATUS) & QUARKX1000_IC_STATUS_ACTIVITY_MASK) {
while (read(QUARKX1000_IC_STATUS) & QUARKX1000_IC_STATUS_ACTIVITY_MASK) {
if ((clock_seconds() - start_time) > I2C_POLLING_TIMEOUT) {
set_value(device.pci.mmio, QUARKX1000_IC_ENABLE,
set_value(QUARKX1000_IC_ENABLE,
QUARKX1000_IC_ENABLE_MASK, QUARKX1000_IC_ENABLE_SHIFT, 0);
return -1;
}
}
/* Disable controller */
set_value(device.pci.mmio, QUARKX1000_IC_ENABLE,
set_value(QUARKX1000_IC_ENABLE,
QUARKX1000_IC_ENABLE_MASK, QUARKX1000_IC_ENABLE_SHIFT, 0);
/* Restore interrupt mask */
write(device.pci.mmio, QUARKX1000_IC_INTR_MASK, intr_mask_stat);
write(QUARKX1000_IC_INTR_MASK, intr_mask_stat);
return 0;
}