new uart_init and uart_setbaud

This commit is contained in:
Mariano Alvira 2012-10-23 21:50:32 -04:00
parent 4d4b09f7ff
commit e7e149d354
21 changed files with 160 additions and 32 deletions

View File

@ -152,6 +152,8 @@ static volatile struct UART_struct * const UART2 = (void *) (UART2_BASE);
#endif /* REG_NO_COMPAT */
void uart_setbaud(volatile struct UART_struct * uart, uint32_t baud);
extern volatile uint32_t u1_head, u1_tail;
void uart1_putc(char c);
#define uart1_can_get() (*UART1_URXCON > 0)

117
lib/uart.c Normal file
View File

@ -0,0 +1,117 @@
/*
* Copyright (c) 2010, Mariano Alvira <mar@devl.org> and other contributors
* to the MC1322x project (http://mc1322x.devl.org)
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of libmc1322x: see http://mc1322x.devl.org
* for details.
*
*
*/
#include <mc1322x.h>
#include <stdint.h>
#define MOD 9999
#define CLK 24000000
#define DIV 16 /* uart->CON.XTIM = 0 is 16x oversample (datasheet is incorrect) */
#include <stdio.h>
void uart_setbaud(volatile struct UART_struct * uart, uint32_t baud) {
uint64_t inc;
/* baud rate eqn from reference manual */
/* multiply by an additional 10 to do a fixed point round later */
inc = ((uint64_t) baud * DIV * MOD * 10 / CLK ) - 10 ;
/* add 5 and divide by 10 to get a rounding */
inc = (inc + 5) / 10;
/* UART must be disabled to set the baudrate */
uart->CONbits = (struct UART_CON) {
.TXE = 0,
.RXE = 0,
};
uart->BR = ( (uint16_t)inc << 16 ) | MOD;
uart->CONbits = (struct UART_CON) {
.XTIM = 0,
.TXE = 1,
.RXE = 1,
};
}
void uart_init(volatile struct UART_struct * uart) {
/* enable the uart so we can set the gpio mode */
/* see Section 11.5.1.2 Alternate Modes */
/* you must enable the peripheral first BEFORE setting the function in GPIO_FUNC_SEL */
/* From the datasheet: "The peripheral function will control operation of the pad IF */
/* THE PERIPHERAL IS ENABLED. */
uart->CONbits = (struct UART_CON) {
.TXE = 1,
.RXE = 1,
};
/* interrupt when there are this number or more bytes free in the TX buffer*/
uart->TXCON = 16;
if( uart == UART1 ) {
/* TX and CTS as outputs */
GPIO->PAD_DIR_SET.GPIO_14 = 1;
GPIO->PAD_DIR_SET.GPIO_16 = 1;
/* RX and RTS as inputs */
GPIO->PAD_DIR_RESET.GPIO_15 = 1;
GPIO->PAD_DIR_RESET.GPIO_17 = 1;
/* set GPIO15-14 to UART (UART1 TX and RX)*/
GPIO->FUNC_SEL.GPIO_14 = 1;
GPIO->FUNC_SEL.GPIO_15 = 1;
u1_head = 0; u1_tail = 0;
/* tx and rx interrupts are enabled in the UART by default */
/* see status register bits 13 and 14 */
/* enable UART1 interrupts in the interrupt controller */
enable_irq(UART1);
} else {
/* do the same as above but for UART2 */
GPIO->PAD_DIR_SET.GPIO_18 = 1;
GPIO->PAD_DIR_SET.GPIO_19 = 1;
GPIO->PAD_DIR_RESET.GPIO_20 = 1;
GPIO->PAD_DIR_RESET.GPIO_21 = 1;
GPIO->FUNC_SEL.GPIO_18 = 1;
GPIO->FUNC_SEL.GPIO_19 = 1;
u2_head = 0; u2_tail = 0;
enable_irq(UART2);
}
}

View File

@ -45,7 +45,8 @@ int main(void)
uint8_t c;
trim_xtal();
uart1_init(INC,MOD,SAMP);
uart_init(UART1);
uart_init(UART1, 115200);
adc_init();
printf("adc test\r\n");

View File

@ -52,7 +52,8 @@ void main(void) {
/* trim the reference osc. to 24MHz */
trim_xtal();
uart_init(INC, MOD, SAMP);
uart_init(UART1);
uart_setbaud(UART1, 115200);
vreg_init();

View File

@ -64,7 +64,8 @@ void main(void) {
/* trim the reference osc. to 24MHz */
trim_xtal();
uart_init(INC, MOD, SAMP);
uart_init(UART1);
uart_init(UART1, 115200);
vreg_init();

View File

@ -99,7 +99,8 @@ void main(void) {
/* trim the reference osc. to 24MHz */
trim_xtal();
uart_init(INC, MOD, SAMP);
uart_init(UART1);
uart_init(UART1, 115200);
vreg_init();

View File

@ -36,19 +36,6 @@
#ifndef CONFIG_H
#define CONFIG_H
/* Baud rate */
#define MOD 9999
/* 230400 bps, INC=767, MOD=9999, 24Mhz 16x samp */
/* 115200 bps, INC=767, MOD=9999, 24Mhz 8x samp */
#define INC 767
/* 921600 bps, MOD=9999, 24Mhz 16x samp */
//#define INC 3071
#define SAMP UCON_SAMP_8X
//#define SAMP UCON_SAMP_16X
/* use uart1 for console */
#define uart_init uart1_init
/* nvm interface */
#define NVM_INTERFACE gNvmInternalInterface_c
/*#define NVM_INTERFACE gNvmExternalInterface_c */

View File

@ -84,8 +84,9 @@ void main(void) {
volatile uint32_t state = SCAN_X;
volatile uint32_t addr,data;
uart_init(UART1);
uart_init(UART1, 115200);
uart_init(INC, MOD, SAMP);
disable_irq(UART1);
vreg_init();

View File

@ -46,7 +46,8 @@ void main(void) {
uint32_t buf[READ_NBYTES/4];
uint32_t i;
uart_init(INC, MOD, SAMP);
uart_init(UART1);
uart_init(UART1, 115200);
print_welcome("nvm-read");

View File

@ -46,7 +46,8 @@ void main(void) {
uint32_t buf[WRITE_NBYTES/4];
uint32_t i;
uart_init(INC, MOD, SAMP);
uart_init(UART1);
uart_init(UART1, 115200);
print_welcome("nvm-write");

View File

@ -117,7 +117,8 @@ void main(void) {
/* trim the reference osc. to 24MHz */
pack_XTAL_CNTL(CTUNE_4PF, CTUNE, FTUNE, IBIAS);
uart_init(INC, MOD, SAMP);
uart_init(UART1);
uart_init(UART1, 115200);
vreg_init();

View File

@ -65,6 +65,8 @@ size_t fwrite(const void *ptr, size_t size, size_t nmemb,
}
#endif
int main(void)
{
char *ptr = "Hello world!";
@ -74,7 +76,8 @@ int main(void)
int mi;
// char buf[80];
uart_init(INC, MOD, SAMP);
uart_init(UART1);
uart_setbaud(UART1, 115200);
print_size(int8_t);
print_size(uint8_t);

View File

@ -46,7 +46,8 @@ int main(void)
int x = 32768;
trim_xtal();
uart1_init(INC,MOD,SAMP);
uart_init(UART1);
uart_init(UART1, 115200);
rtc_init();
printf("pwm test\r\n");

View File

@ -62,7 +62,8 @@ void main(void) {
/* trim the reference osc. to 24MHz */
trim_xtal();
uart_init(INC, MOD, SAMP);
uart_init(UART1);
uart_init(UART1, 115200);
vreg_init();

View File

@ -70,7 +70,8 @@ void main(void) {
/* trim the reference osc. to 24MHz */
trim_xtal();
uart_init(INC, MOD, SAMP);
uart_init(UART1);
uart_init(UART1, 115200);
vreg_init();

View File

@ -42,7 +42,8 @@
void main(void) {
volatile uint8_t *data;
uart_init(INC, MOD, SAMP);
uart_init(UART1);
uart_init(UART1, 115200);
for(data = DUMP_BASE; data < ((uint8_t *)(DUMP_BASE+DUMP_LEN)); data++) {
uart1_putc(*data);

View File

@ -41,7 +41,8 @@
void main(void) {
uart_init(INC,MOD,SAMP);
uart_init(UART1);
uart_init(UART1, 115200);
*mem32(0x00401ffc) = 0x01234567;
*mem32(0x00407ffc) = 0xdeadbeef;

View File

@ -41,8 +41,10 @@
void main(void) {
uart1_init(INC,MOD,SAMP);
uart2_init(INC,MOD,SAMP);
uart_init(UART1);
uart_init(UART2);
uart_setbaud(UART1, 115200);
uart_setbaud(UART2, 115200);
while(1) {
if(uart1_can_get()) {

View File

@ -41,7 +41,9 @@
void main(void) {
uart1_init(INC,MOD,SAMP);
// uart1_init(INC,MOD,SAMP);
uart_init(UART1);
uart_setbaud(UART1, 1200);
while(1) {
if(uart1_can_get()) {

View File

@ -46,7 +46,8 @@
void main(void) {
volatile uint32_t i;
uart1_init(INC,MOD,SAMP);
uart_init(UART1);
uart_init(UART1, 115200);
printf("reset\n\r");

View File

@ -48,7 +48,8 @@ int main(void)
ctune = 0;
ftune = 0;
uart1_init(INC,MOD,SAMP);
uart_init(UART1);
uart_init(UART1, 115200);
print_welcome("pwm test\r\n");
pack_XTAL_CNTL(ctune_4pf, ctune, ftune, IBIAS);