Allow and document IEEE mode for CC13xx

This commit is contained in:
g.oikonomou@bristol.ac.uk 2016-07-17 01:51:40 +01:00
parent 6157dce0b5
commit ec4b403e77
4 changed files with 33 additions and 2 deletions

View File

@ -97,6 +97,8 @@
#define cc26xx_rf_cpe0_isr RFCCPE0IntHandler
#define cc26xx_rf_cpe1_isr RFCCPE1IntHandler
/*---------------------------------------------------------------------------*/
typedef ChipType_t chip_type_t;
/*---------------------------------------------------------------------------*/
/* Remember the last Radio Op issued to the radio */
static rfc_radioOp_t *last_radio_op = NULL;
/*---------------------------------------------------------------------------*/
@ -371,7 +373,7 @@ uint8_t
rf_core_set_modesel()
{
uint8_t rv = RF_CORE_CMD_ERROR;
ChipType_t chip_type = ti_lib_chipinfo_get_chip_type();
chip_type_t chip_type = ti_lib_chipinfo_get_chip_type();
if(chip_type == CHIP_TYPE_CC2650) {
HWREG(PRCM_BASE + PRCM_O_RFCMODESEL) = PRCM_RFCMODESEL_CURR_MODE5;
@ -382,6 +384,9 @@ rf_core_set_modesel()
} else if(chip_type == CHIP_TYPE_CC1310) {
HWREG(PRCM_BASE + PRCM_O_RFCMODESEL) = PRCM_RFCMODESEL_CURR_MODE3;
rv = RF_CORE_CMD_OK;
} else if(chip_type == CHIP_TYPE_CC1350) {
HWREG(PRCM_BASE + PRCM_O_RFCMODESEL) = PRCM_RFCMODESEL_CURR_MODE5;
rv = RF_CORE_CMD_OK;
}
return rv;

View File

@ -13,7 +13,8 @@ platform supports two different boards:
The CPU code, common for both platforms, can be found under `$(CONTIKI)/cpu/cc26xx-cc13xx`.
The port was developed and tested with CC2650s, but the intention is for it to
work with the CC2630 as well. Thus, bug reports are welcome for both chips.
Bear in mind that the CC2630 does not have BLE capability.
Bear in mind that the CC2630 does not have BLE capability. Similar rules apply
in terms of CC13xx chips.
This port is only meant to work with 7x7mm chips
@ -186,6 +187,15 @@ the jumper configuration on P408 as discussed in
[this thread](https://e2e.ti.com/support/wireless_connectivity/f/158/p/411992/1483824#1483824)
on E2E. For this to work, you need to set `BOARD_CONF_DEBUGGER_DEVPACK` to 0.
IEEE vs Sub-GHz operation
=========================
The platform supports both modes of operation, provided the chip also has the
respective capability. If you specify nothing, the platform will default to
Sub-GHz mode for CC13xx devices, IEEE mode otherwise. To force IEEE mode, you
need to add this line to your `project-conf.h`.
#define CC13XX_CONF_PROP_MODE 0
Low Power Operation
===================
The platform takes advantage of the CC26xx's power saving features. In a

View File

@ -89,7 +89,18 @@
#define NETSTACK_CONF_FRAMER framer_802154
#endif
/*
* Auto-configure Prop-mode radio if we are running on CC13xx, unless the
* project has specified otherwise. Depending on the final mode, determine a
* default channel (again, if unspecified) and configure RDC params
*/
#if CPU_FAMILY_CC13XX
#ifndef CC13XX_CONF_PROP_MODE
#define CC13XX_CONF_PROP_MODE 1
#endif /* CC13XX_CONF_PROP_MODE */
#endif /* CPU_FAMILY_CC13XX */
#if CC13XX_CONF_PROP_MODE
#define NETSTACK_CONF_RADIO prop_mode_driver
#ifndef RF_CORE_CONF_CHANNEL

View File

@ -190,6 +190,11 @@ main(void)
printf("With DriverLib v%u.%u\n", DRIVERLIB_RELEASE_GROUP,
DRIVERLIB_RELEASE_BUILD);
printf(BOARD_STRING "\n");
printf("IEEE 802.15.4: %s, Sub-GHz: %s, BLE: %s, Prop: %s\n",
ti_lib_chipinfo_supports_ieee_802_15_4() == true ? "Yes" : "No",
ti_lib_chipinfo_chip_family_is_cc13xx() == true ? "Yes" : "No",
ti_lib_chipinfo_supports_ble() == true ? "Yes" : "No",
ti_lib_chipinfo_supports_proprietary() == true ? "Yes" : "No");
process_start(&etimer_process, NULL);
ctimer_init();