Benoît Thébaudeau
b21da96e67
enc28j60: Print revision during initialization
...
This is useful as debug information since the revisions of this device
have notable differences.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-07-16 21:14:14 +02:00
Benoît Thébaudeau
ba6a0bc381
enc28j60: Add workaround for erratum #2 "CLKRDY set early"
...
A delay of 1 ms must be added after the System Reset Command. Still wait
for ESTAT.CLKRDY afterwards as a precaution.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-07-16 21:14:13 +02:00
Benoît Thébaudeau
48f269e4f5
enc28j60: Fix RCR command for MAC and MII registers
...
The Read Control Register command requires that a dummy byte be read
before the register value for the MAC and MII registers.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-07-16 21:14:13 +02:00
Benoît Thébaudeau
35544e81ee
enc28j60: Reuse read/writedata() for read/writedatabyte()
...
The read/writedatabyte() functions are just a special case of
read/writedata() with a simpler API, so reuse these instead of
duplicating code.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-07-16 21:14:13 +02:00
Ulf Knoblich
557091b710
cc1200: added nullrdc timing parameters to rf configuration file
2015-06-22 14:59:14 +02:00
Ulf Knoblich
584b6ae4ca
cc1200: removed the hardware dependent sniffer stuff from cc1200
2015-05-29 15:19:16 +02:00
Ulf Knoblich
ed0460e369
cc1200: Initial commit (tested with 50kps nullrdc) + update rf configuration
2015-05-28 15:08:01 +02:00
Simon Duquennoy
333e076b24
Disable PACKETBUF_ATTR_PACKET_TYPE in the non-Rime case by default
2015-05-06 16:36:15 +02:00
Adam Dunkels
12beebeec0
IP64 bindings for the ENC28j60 Ethernet driver
2015-04-15 08:30:26 +02:00
Nicolas Tsiftes
132b31d6de
Merge pull request #715 from adamdunkels/pr/enc28j60
...
ENC28j60 Ethernet driver code
2015-03-30 13:45:12 +02:00
Nicolas Tsiftes
a785405b36
Make it possible to set and get the CC2420's CCA threshold through the extended radio API.
2015-02-19 11:26:43 +01:00
kkrentz
f513ef9ef0
CC2420: Added RSSI_OFFSET as described in the manual
2014-08-05 05:07:06 -07:00
kkrentz
75d2914aaf
CC2420: Added GET_LOCK/RELEASE_LOCK to set_key & encrypt
2014-08-05 05:07:06 -07:00
kkrentz
c6a98f2968
CC2420: Turned SPI macros to functions and removed redundant AES API
2014-08-05 05:07:06 -07:00
kkrentz
6486c51692
CC2420: Hardware-accelerated aes_128_driver
2014-08-05 05:07:06 -07:00
kkrentz
2bac58f7b6
CC2420: Reusing getrxdata instead of getrxbyte.
2014-08-05 05:07:06 -07:00
kkrentz
e977da8fe2
CC2420: Eliminated duplicated code in cc2420_read
2014-08-05 05:07:05 -07:00
kkrentz
e3eb924f13
CC2420: Removed unused variables
2014-08-05 05:07:05 -07:00
kkrentz
1cb60b27de
CC2420: Removed commented code
2014-08-05 05:07:05 -07:00
kkrentz
b53e35b2a0
CC2420: The crystal oscillator only needs to stabilize at startup
2014-08-05 05:07:05 -07:00
kkrentz
06d3225aa7
CC2420: CC2420_WRITE_RAM with parameterizable ordering + resulting
...
simplifications
2014-08-05 05:07:05 -07:00
kkrentz
b89d37d301
CC2420: Macros as functions for saving program memory
2014-08-05 05:07:05 -07:00
kkrentz
9e266acd9c
CC2420: Doing CRC in hardware all the time
2014-08-05 05:07:05 -07:00
Adam Dunkels
bf7e191ef3
ENC28j60 Ethernet driver code
2014-06-12 00:03:44 +02:00
Niclas Finne
132b8dde3b
Fixed CC2420 to return RADIO_RESULT_INVALID_VALUE if trying to set a
...
transmission power outside the valid range instead of using closest
valid value.
2014-04-13 21:43:37 +02:00
Niclas Finne
271ac4413f
Removed the unused function cc2420_cca_valid and replaced some macros
...
with functions in CC2420. This reduces the code size with over 400 bytes.
2014-04-11 14:46:49 +02:00
Niclas Finne
8c0cdcfaec
Added radio parameters RADIO_PARAM_RSSI and RADIO_PARAM_TXPOWER for cc2420
2014-04-09 21:25:38 +02:00
Niclas Finne
9d01fbf735
Added stub for extended radio API for CC2520
2014-04-03 13:38:17 +02:00
Niclas Finne
0874165722
Added stub for extended radio API for CC2420
2014-04-03 13:38:13 +02:00
Adam Dunkels
bddd96d5c8
Removed all module makefiles. Instead, all .c files in a module directory are compiled.
2014-01-26 23:20:46 +01:00
Adam Dunkels
25367fb08c
Moved the ds2411 driver into a dev/ds2411 module
2014-01-26 23:20:31 +01:00
Adam Dunkels
c9efe3c3c4
Moved the cc2520 driver into its own dev/cc2520 module
2014-01-26 23:20:31 +01:00
Adam Dunkels
4cfe6c4a5e
Moved the sht11 driver to its own module
2014-01-26 23:20:30 +01:00
Adam Dunkels
0b805e4763
Moved the cc2420 driver into a separate dev/cc2420 module
2014-01-26 23:20:27 +01:00
