Apple-2-SW/contiki
1
0
Fork 0
mirror of https://github.com/oliverschmidt/contiki.git synced 2024-11-03 22:06:22 +00:00
Code Issues Projects Releases Wiki Activity
10,520 Commits 1 Branch 17 Tags 75 MiB
15bc0c6daa
Commit Graph

2307 Commits

Author SHA1 Message Date
Nicolas Tsiftes
277dc8e174 Merge pull request #826 from alignan/fix_octal 
Remove leading zeros from node id
 2015-02-11 22:35:02 +01:00
Thomas Weber
f06bd06b79 corrected line - #if UIP_CONF_IPV6 - in contiki-rcb-main.c to - #if NETSTACK_CONF_WITH_IPV6 - 2015-02-02 22:08:35 +01:00
PAtO!
2c2b930648 Fix: Misconfigurations to compile for avr-zigbit platform 2015-01-29 14:31:47 -03:00
Thomas Weber
d575f1a6ce added missing modules in Makefile.avr-rcb, added netstack init functions (to start the at86rf230, modified macros to increase the buffersize) 2015-01-17 19:19:16 +01:00
Víctor Ariño
ccc0d27da0 Integrates uip-nameserver API 
On the same commit the src have been uncrustified and some typo
fixes as well as includes missing.
 2015-01-09 09:44:06 +01:00
George Oikonomou
8fe5456588 Change default PAN ID for the CC2538DK platform to 0xABCD 2014-12-08 22:33:33 +00:00
George Oikonomou
73a133373a Change CC2530DK default PAN ID to 0xABCD and make it configurable by project-conf.h 2014-12-08 22:33:11 +00:00
Simon Duquennoy
c2ca3e9fdb Cleanup UIP_CONF_IPV6_RPL configuration 2014-12-02 12:38:55 +01:00
Simon Duquennoy
6891bcdd20 Remove unneeded module inclusion from avr and seedeye platforms 2014-12-01 21:06:01 +01:00
Simon Duquennoy
0d9815e08b WITH_UIP6 -> NETSTACK_CONF_WITH_IPV6 2014-12-01 21:04:54 +01:00
Simon Duquennoy
a9cc909794 Network layer configuration: replace UIP_CONF_* with NETSTACK_CONF_WITH_* 2014-12-01 21:02:57 +01:00
Simon Duquennoy
229c53a2e6 Cooja platform: do not include the rime module by default 2014-12-01 20:13:10 +01:00
Simon Duquennoy
e85f41ffa0 Get IPv6 to fit in micaz platform again 2014-12-01 20:13:09 +01:00
Simon Duquennoy
722b3258d1 Cleanup of the Contiki network layer configuration. Now using CONTIKI_WITH_IPV6, CONTIKI_WITH_IPV4, and CONTIKI_WITH_RIME in makefiles, and UIP_CONF_IPV6, UIP_CONF_IPV4, UIP_CONF_RIME in c code. Now only the stacks that are used are compiled (via makefile MODULES). Make IPv6 the default network stack. 2014-12-01 20:13:09 +01:00
Nicolas Tsiftes
d820feadd6 Merge pull request #792 from wchyan/master 
atmega128rfa1: Fix the default build error
 2014-11-28 19:23:26 +01:00
Nicolas Tsiftes
69c76c9f2f Merge pull request #872 from Bocci83/master 
Seedeye platform: add the explicit list of modules
 2014-11-28 19:21:52 +01:00
Nicolas Tsiftes
9b90c378e8 Merge pull request #812 from kkrentz/packetbuf-holds-broadcast 
packetbuf_holds_broadcast()
 2014-11-28 19:15:19 +01:00
kkrentz
7b63217a32 ContikiMAC: Default to contikimac_framer when using Rime over ContikiMAC 2014-11-25 04:56:09 -08:00
Stefano
a5550fa083 Seedeye platform: add the explicit list of modules 2014-11-21 14:36:23 +01:00
Antonio Lignan
e8c49dd29e Remove leading zeros from node id 2014-11-20 14:48:28 +01:00
Nicolas Tsiftes
866bb99944 Merge pull request #860 from simonduq/frame802154-align 
frame802154_t: make sure dest_addr and src_addr are aligned
 2014-11-18 08:59:30 +01:00
kkrentz
fb00a217f5 packetbuf: Use packetbuf_holds_broadcast() all-over 2014-11-13 09:58:08 -08:00
Enrico Joerns
b0206e2f58 [doc] avr-raven: Fix placement of description for ravenserial group 
Note: The raven-lcd-interface and raven-ipso modules in atmega128rfa1
seem to be needles for this platform and might be there only because of
copy&paste from the raven platform. Should be removed in a later patch.
 2014-11-10 23:53:34 +01:00
Enrico Joerns
846fd567d4 [doc] avr-atmega128rfa1: add to parent platform group 2014-11-10 23:53:34 +01:00
Enrico Joerns
d4cf5ef5a1 [doc] Added minimal doxygen anchor for each platform currently available in Contiki 
Already existing label names and titles were retained
 2014-11-10 23:53:34 +01:00
Enrico Joerns
0288f867ce [platform/native] Add to doxygen tree 2014-11-10 23:53:32 +01:00
Enrico Joerns
9dd7f1d29a [doc] added faulty esb and msp430 references 2014-11-10 23:53:32 +01:00
Enrico Joerns
0b8769e576 [doc] Various fixes for doxygen grouping etc. 2014-11-10 23:53:32 +01:00
Simon Duquennoy
6b7017452b frame802154: move inclusion of linkaddr.h from .h to .c file 2014-11-10 15:43:32 +01:00
Fredrik Österlind
0a2804fd69 Merge pull request #846 from ejoerns/pull-req/cooja-platform 
Cooja platform fixes
 2014-11-05 15:21:18 +01:00
Enrico Joerns
0d12bcffcb [cooja-platform] Fixes for slip-bridge compatibility 
* Added dev/uart1.h header file to cooja platform
* Added slip arch stub
* Suppress examples putchar definition as cooja platform provides its own

Note that the uart1.h file should only be an intermediate solution.
A generic contiki-wide definition for uart handling is required as each
platform defines its own varying set of uart functions.
 2014-11-04 00:14:06 +01:00
Enrico Joerns
5a4c2e0d1f [cooja-platform] Add cast to linkaddr_t to avoid warning 2014-11-04 00:09:45 +01:00
Enrico Joerns
f8445ba1bd [cooja-platform] Remove unused variable 'shortaddr' 
This variable was set but never used in the code
 2014-11-04 00:09:45 +01:00
Enrico Joerns
2bc1e08f19 [cooja-platform] Include eeprom.h to avoid implicit declaration warning 2014-11-04 00:09:45 +01:00
Antonio Lignan
ef6c351d0c Add function to change I2C baudrate and push relevant configuration values to platform config 2014-10-20 14:23:36 +02:00
Nicolas Tsiftes
0d39ee96ad Merge pull request #820 from alignan/serialnum_as_nodeid 
Use the Z1 product ID as MAC/Node ID if no value is found in XMEM
 2014-10-20 11:38:11 +02:00
Nicolas Tsiftes
27cde1ff81 Merge pull request #824 from alignan/fix_warnings 
Warning fixes
 2014-10-20 11:16:36 +02:00
Antonio Lignan
cceb97059c Use the Z1 product ID as MAC/Node ID if no value is found in the XMEM 2014-10-20 10:36:49 +02:00
Antonio Lignan
c836fbfbd9 Fixes warnings, bad code and code style 2014-10-20 10:28:00 +02:00
Moritz 'Morty' Strübe
c0783e2841 sky: Initialize energest as early as possible 
If energest is initialized too late, the radio is not accounted
until the first switch. This is a problem when the radio is always
listening.
 2014-10-09 09:42:56 +02:00
Mariano Alvira
e803a654b4 Merge pull request #684 from SmallLars/2nd-button 
Enabled 2nd button on platform econotag
 2014-10-08 14:05:24 -05:00
Adam Dunkels
d891d11324 Merge pull request #557 from kkrentz/llsec-integration 
Integration of Link Layer Security
 2014-10-08 15:45:46 +02:00
Antonio Lignan
5bbb0cabbc Added battery capability to Z1 platform 2014-10-08 11:53:09 +02:00
Antonio Lignan
343a3d3f7b Added missing radio capability define to Z1 platform config 2014-09-24 11:42:55 +02:00
Weichuan Yan
7b6439bd6f atmega128rfa1: Fix the default build error 
Fixing from http://sourceforge.net/p/contiki/mailman/message/32494852/

Signed-off-by: Weichuan Yan <yan.weichuan@gmail.com>
 2014-09-18 08:53:32 +08:00
Atis Elsts
0e9c051485 Fix time accounting on TI EXP5438 MSP430x5438a experimenters board 2014-08-21 18:10:53 +02:00
Nicolas Tsiftes
35b6032c64 Merge pull request #745 from PaulCorbalan/patch-1 
Add PLATFORM_HAS_RADIO in Sky Platform
 2014-08-18 15:08:37 +02:00
kkrentz
94d2b519e4 aducrf101mkxz: added llsec module 2014-08-05 09:15:40 -07:00
kkrentz
2cf7d98cad ContikiMAC: Create and parse ContikiMAC header in special framer; Expanded framer interface 
to allow for creating and securing frames in advance; Create and secure frames in advance when sending bursts; Do neither recreate nor resecure frames that come from phase
 2014-08-05 05:07:06 -07:00
kkrentz
c15a05aee1 Sky: Use the cc2420_aes_128_driver by default 2014-08-05 05:07:06 -07:00
kkrentz
c6a98f2968 CC2420: Turned SPI macros to functions and removed redundant AES API 2014-08-05 05:07:06 -07:00
kkrentz
c032b67969 llsec: Noncompromise-resilient 802.15.4 security 2014-08-05 05:07:05 -07:00
kkrentz
7943751b16 Sky: DEBUG on/off switch 2014-08-04 01:09:57 -07:00
kkrentz
c7b394c51b Sky: Calling NETSTACK_LLSEC.bootstrap from contiki-sky-main.c 2014-08-04 01:09:57 -07:00
kkrentz
c396a85364 llsec: Added a layer in between NETSTACK_MAC and NETSTACK_NETWORK for implementing link layer security 2014-08-04 01:09:57 -07:00
Jim Paris
9b76c2fb17 aducrf101: Adjust default buffer sizes to fit better in available RAM 2014-07-29 18:25:55 -04:00
Adam Dunkels
62b8aafb03 Merge pull request #722 from royscheefhals/contiki-fix 
char * data to void * data parameter in process_start
 2014-07-28 22:04:36 +02:00
Nicolas Tsiftes
582bfcb8c6 Merge pull request #696 from sieben/doc 
Correct several doxygen tags (\file,...)
 2014-07-28 11:42:41 +02:00
Rémy Léone
8c3fa17ec0 Correct several doxygen tags (\file) 2014-07-28 11:11:45 +02:00
George Oikonomou
95e2cd9021 Merge pull request #732 from camilorodegheri/patch-1 
Update README.md
 2014-07-27 22:55:00 +01:00
Jim Paris
6db05caed9 Fix radio hangups when trying to transmit with radio off. 
The border-router tries to transmit and do other stuff after turning
the radio off, and the radio driver didn't handle that very well.
With this fix, it's no longer necessary to reset the border router
after starting tunslip6.
 2014-07-23 16:21:53 -04:00
Jim Paris
6937b29670 Add Windows build instructions for ev-aducrf101mkxz platform 2014-07-23 16:21:53 -04:00
Jim Paris
07201d13a3 Add IAR compiler support for ADuCRF101 2014-07-23 16:21:53 -04:00
Jim Paris
4f1fc3557c Add README.md for ev-aducrf101mkxz platform 2014-07-23 16:21:53 -04:00
Jim Paris
ad141b00fb Implement rtimers for ADuCRF101 2014-07-22 21:18:16 -04:00
Jim Paris
c8716f4d57 Add platform LED driver 2014-07-22 21:18:16 -04:00
Jim Paris
63692ba96d Add button sensor support (BOOT button) 2014-07-22 21:18:16 -04:00
Jim Paris
4cb97a3311 Move RF RX into its own process 2014-07-22 21:18:16 -04:00
Jim Paris
b7373edf8c Add ADuCRF101 radio driver 2014-07-22 21:18:16 -04:00
Jim Paris
5673b46e86 Add initial EV-ADuCRF101MKxZ platform support 2014-07-22 21:18:16 -04:00
Nicolas Tsiftes
784b20c04d Merge pull request #739 from alignan/merge_z1sp_with_z1 
Merges Z1SP into Z1 platform
 2014-07-04 22:03:27 +02:00
Oliver Schmidt
9ee1bae150 Only wait for a keypress if the user is told to press a key. 2014-07-04 19:33:35 +02:00
Antonio Lignan
5467674fcc Merges Z1SP into Z1 platform 2014-07-04 10:41:05 +02:00
Pablo Corbalán
a490986401 Add PLATFORM_HAS_RADIO in Sky Platform 
In order to use the er-server-example Radio resource it is required that the platform defines that it has a radio. This line might be required in other platforms.
 2014-07-03 14:59:13 +01:00
Rémy Léone
f111058472 Removing trailing whitespaces 2014-06-30 20:01:05 +02:00
Ian Martin
6ae6c4768e rl78: Change RIMEADDR_CONF_SIZE to LINKADDR_CONF_SIZE because the rimeaddr module has been renamed to linkaddr. 2014-06-28 22:07:57 -04:00
Camilo Rodegheri
a50e933f4b Update README.md 
Adding new command for ftdi_sio which applies to Kernel>3.12 used by Ubuntu 14.04 LTS
 2014-06-21 15:04:48 -03:00
Antonio Lignan
3d64b80e40 Added flags to enable 20-bit support from msp430-gcc 4.7.x 2014-06-17 12:55:08 +02:00
Nicolas Tsiftes
4c5fa6ff5d Merge pull request #713 from adamdunkels/pr/drop-iris 
Remove the unmaintained iris platform
 2014-06-13 12:57:52 +02:00
Roy Scheefhals
1058ea986a Changed the parameter 'char * data' of process_start to the 
type process_data_t. This was an artifact when the choice was
made to use the void * type for the data parameter in processes.

Changed parameter 'void * data' of process_post_synch to
process_data_t for consistency.

Checked all the uses of process_start() in contiki and fixed casts
of the data parameter.
 2014-06-12 13:40:28 +02:00
Adam Dunkels
9ceb059c21 Merge pull request #611 from nfi/cc2x20-sfd-config 
Corrected CC2x20 sfd config and startup message.
 2014-06-11 23:17:05 +02:00
Adam Dunkels
d7e4443ab2 Remove the unmaintained iris platform 2014-06-11 19:52:19 +02:00
Nicolas Tsiftes
da8e9a3e8d Merge pull request #655 from atiselsts/stm32_patches 
Fix inconsistent usage of short/long integer type in mbxxx platform's configuration file.
 2014-06-07 23:21:59 +02:00
Nicolas Tsiftes
350c83c947 Merge pull request #656 from atiselsts/native_platform_patches 
Minor improvements for the native platform
 2014-06-07 23:06:36 +02:00
George Oikonomou
ba9c2d40eb Merge pull request #682 from g-oikonomou/watchdog-cc2538 
Confine CC2538 WDT on/off conf inside the driver
 2014-06-03 22:05:08 +01:00
George Oikonomou
25cd0788a6 Merge pull request #683 from g-oikonomou/sensinode-modules 
Fix MODULES for the Sensinode platform
 2014-06-03 22:03:42 +01:00
Adam Dunkels
64f65b4e45 Merge pull request #617 from nfi/extended-radio-api 
Extended radio API with support for setting channel, pan id, addressing modes, etc
 2014-06-03 21:32:53 +02:00
Nicolas Tsiftes
3650950460 Merge pull request #678 from simonduq/sky-disable-ndp 
Disable IPv6 Neighbor Discovery Protocol by default on the sky platform
 2014-06-02 10:52:07 +02:00
Rémy Léone
25c8b0835d Closing doxygen groups 2014-05-30 11:01:20 +02:00
Lars Schmertmann
50481722a8 Enabled 2nd button on platform econotag 2014-05-23 11:50:12 +02:00
George Oikonomou
6e08841e5c Fix MODULES for the Sensinode platform 2014-05-18 15:30:54 +02:00
George Oikonomou
807ee624e4 Confine CC2538 WDT on/off conf inside the driver 
Instead of requiring all calls to `watchdog_start` to be
wrapped inside `#if WATCHDOG_CONF_ENABLE` guards, we control
things from within the WDT driver itself.

This commit also includes some minor documentation and
indentation cleanups
 2014-05-18 14:12:16 +02:00
George Oikonomou
b864ec2b71 Merge pull request #661 from hexluthor/watchdog-enable 
CC2538: Add WATCHDOG_CONF_ENABLE to optionally disable the watchdog timer
 2014-05-18 14:11:49 +02:00
George Oikonomou
eabc244bff Merge pull request #641 from hexluthor/backdoor-conf 
CC2538: Add CONF parameters to select boot loader backdoor pin and logic level
 2014-05-18 13:29:02 +02:00
George Oikonomou
026864d129 Merge pull request #665 from hexluthor/cc2538-flash-conf 
CC2538: Add FLASH_CONF_ORIGIN and FLASH_CONF_SIZE config parameters.
 2014-05-18 13:12:49 +02:00
Simon Duquennoy
6e53ab6eb0 Disable IPv6 Neighbor Discovery Protocol by default on the sky platform 2014-05-14 17:29:18 +02:00
Claes Jakobsson
9c08f28956 Added EEPROM support for Cooja with a rudimentary hexdump -C like viewer in the mote interface view 2014-05-08 22:35:58 +02:00
Ian Martin
2abaeaa8cc CC2538: Add FLASH_CONF_ORIGIN and FLASH_CONF_SIZE config parameters. 2014-05-02 11:35:58 -04:00
Ian Martin
7081440eff CC2538: Add WATCHDOG_CONF_ENABLE to optionally disable the watchdog timer. 2014-05-02 10:28:30 -04:00
George Oikonomou
08c884afa0 Improve the CC2538 extended RF API implementation 
* Decouple 64-bit address from LINKADDR_SIZE
* get and set object from/to the start/end of the src/dest buffer
* We expect size == 8 (rather than size < 8) for both get_ and set_object. Error otherwise
* The RF no longer sets parameters by itself. We let the platform do this, using the extended API.
 2014-04-23 12:20:16 +01:00
George Oikonomou
3183805ba4 Implement extended RF API for the CC2530 RF 2014-04-23 12:16:50 +01:00
Atis Elsts
7dcfe77fba Fix inconsistent usage of short/long integer type in mbxxx platform's configuration file. 
The type used to store rtimer ticks on this platform is 32-bit integer, but the macro uses 16-bit comparison.
As a result, the output of the RTIMER_CLOCK_LT(a,b) macro was incorrect when used for comparisons between time values with sufficiently large difference.
The code to repeat this problem on mbxxx platform:

  rtimer_clock_t a = 6 * RTIMER_ARCH_SECOND;
  rtimer_clock_t b = 0;
  printf("%d\n", RTIMER_CLOCK_LT(a,b)); // expected output: "0", actual: "1"
 2014-04-22 14:52:50 +02:00
Atis Elsts
9cbfede2b6 Explicitly initialize queue buffer in the main startup routine only if uIP is used. 
The Rime stack already does this on its own, and there is no need to do it twice.
 2014-04-22 14:40:04 +02:00
Atis Elsts
b9e15a5986 Make native platform's main loop less noisy. 2014-04-22 14:38:08 +02:00
Atis Elsts
6ea744421b Initialize the rtimer component on native platform's startup. 
Otherwise applications that use rtimers die when run as native code because of an unhandled signal.
 2014-04-22 14:35:01 +02:00
Ian Martin
ee05810904 Changes suggested by @bthebaudeau. 2014-04-18 10:29:47 -04:00
George Oikonomou
49bf7cc241 Merge pull request #616 from hexluthor/listing 
CC2538: Add a Makefile rule to generate a final assembly listing.
 2014-04-17 22:13:52 +01:00
Benoît Thébaudeau
d93d129da6 cc2538: uart: Make it possible to use several UARTs simultaneously 
This avoids the limitation of having a single UART available at runtime, without
duplicating code.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
 2014-04-17 18:53:44 +02:00
Ian Martin
2cf730a1c6 Un-indent preprocessor directives. 2014-04-17 10:39:00 -04:00
Ian Martin
23a3a7f004 Add a note about "make cc2538-demo.lst" to the platform README. 2014-04-16 10:47:01 -04:00
Ian Martin
16936d864c Rename FLASH_CCA_CONF_BOOTLDR_BACKDOOR_PIN to FLASH_CCA_CONF_BOOTLDR_BACKDOOR_PORT_A_PIN. 2014-04-16 10:19:37 -04:00
Ian Martin
1a63c47cf9 CC2538: Add CONF parameters to select boot loader backdoor pin and logic level. 2014-04-15 17:36:55 -04:00
Brad Campbell
af27d2d252 [CC2538-SPI] Implement SPI_FLUSH, spi mode, !CS 
Because the CC2538 has a multi-byte SPI RX FIFO, flushing the buffer
requires more than just a single read. This adds a loop that empties the
entire RX buffer on a FLUSH().

Different SPI chips needs different SPI settings. This commit adds a
function that allows chip drivers to configure the SPI peripheral before
using it.

The frame pin the driver was using as a chip select does not work as
most devices expect it to. It toggles after every byte, and most chips
interpret that as end of message. To make drivers more reliable, each
chip driver should setup a GPIO and assert it as needed.
 2014-04-15 14:07:10 -04:00
George Oikonomou
33abe26ec8 Merge pull request #411 from ADVANSEE/cc2538-adc 
cc2538: Add adc driver and example
 2014-04-13 03:05:12 +01:00
George Oikonomou
22554e6d72 Merge pull request #596 from hexluthor/cc2538-uart-baudrate 
cc2538: Support any UART baudrate.
 2014-04-13 02:51:58 +01:00
Niclas Finne
fc6814a104 Added stub for extended radio API for seedeye 2014-04-03 13:38:31 +02:00
Niclas Finne
b8a23564a3 Added stub for extended radio API for Cooja 2014-04-03 13:38:29 +02:00
Niclas Finne
b13b5fc9ac Fixed typo to correctly print the radio channel at startup 2014-03-28 11:54:12 +01:00
Ian Martin
336224633a Eliminate UART_CONF_IBRD and UART_CONF_FBRD. 2014-03-22 10:26:03 -04:00
François Revol
726bdd699a native: Add CTK to the module list 
It is needed for apps compiled WITH_GUI.
 2014-03-21 23:01:02 +01:00
Nicolas Tsiftes
b78eb96a54 Merge pull request #590 from g-oikonomou/native-rpl-module 
Include the RPL module for the native platform
 2014-03-18 12:32:56 +01:00
Oliver Schmidt
d1d6278f42 Added info on W5100 driver. 2014-03-15 16:56:08 +01:00
George Oikonomou
4704eeb919 Include the RPL module for the native platform 2014-03-09 03:29:43 +00:00
George Oikonomou
6dc9dfa6c2 Merge pull request #551 from JelmerT/feature-cc2538-bsl 
CC2538 serial boot loader python script
 2014-03-09 02:11:36 +00:00
Jelmer Tiete
34e48f4233 Added bootloader backdoor configuration for cc2538DK in contiki-conf.h and selector in startup-gcc.c. Updated Makefile.cc2538dk to support direct uploading. Also updated the platform readme to include the workflow with cc2538-bsl. 2014-03-07 15:44:08 +01:00
Brad Campbell
d14f0d5eed CC2538: add secondary location to ieee address 
The CC2538 currently has two addressing options: a hardcoded address set
at compile time or the address stored in primary address section of the
info page. This commit adds the option to choose the secondary location
of the ieee address from the info page, or any memory address.

To use, define `IEEE_ADDR_CONF_USE_SECONDARY_LOCATION` in `project-conf.h`
or similar.

For example:

    #define IEEE_ADDR_CONF_USE_SECONDARY_LOCATION 1
 2014-03-06 10:31:30 -05:00
Oliver Schmidt
a1cd642e6e Merge pull request #554 from oliverschmidt/master 
Fixed win32 broken by recent changes.
 2014-02-02 12:10:57 -08:00
Oliver Schmidt
71c671b6cf Fixed win32 broken by recent changes. 2014-02-02 20:19:47 +01:00
George Oikonomou
a63376f8be Use -Os for CC2538 builds 
As discussed in #503, -Os was broken with one of the toolchains
recommended in the platform's README and for that reason we were
using -O2 by default.

This commit sets the default to -Os and updates the README to no
longer recommend the toolchain in question
 2014-01-31 20:02:43 +00:00
Adam Dunkels
45265249fc Changed the name of the rimeaddr module to linkaddr 2014-01-29 20:12:24 +01:00
Adam Dunkels
765e9acded Merge pull request #499 from adamdunkels/bold/modularize-everything 
A bold move: modularize everything
 2014-01-29 08:17:10 -08:00
Ian Martin
f3cc607101 eval-adf7xxxmb4z: Use the nullrdc driver instead of sicslowmac. 2014-01-26 17:40:31 -05:00
Adam Dunkels
4f498e2eac Updated the include paths to point to the new places 2014-01-26 23:20:47 +01:00
Adam Dunkels
2ec176891f Added the necessary modules to make the eval-adf7xxxmb4z port compile 2014-01-26 23:20:47 +01:00
Adam Dunkels
824d2047da Add the explicit list of modules, since we cannot do auto-dependency management of them 2014-01-26 23:20:47 +01:00
Adam Dunkels
fce84c178c Removed unused rime-udp code 2014-01-26 23:20:45 +01:00
Adam Dunkels
8eace27f9b Moved net/rime.h to net/rime/rime.h 2014-01-26 23:20:45 +01:00
Adam Dunkels
1be10f026a Handle the CONTIKI_NO_NET case so that the ravenusbstick example builds 2014-01-26 23:20:42 +01:00
Adam Dunkels
6594873753 Updated the path to uip-debug.h 2014-01-26 23:20:41 +01:00
Adam Dunkels
4c2bd9f120 A set of default modules for the cc253x platform 2014-01-26 23:20:41 +01:00
Adam Dunkels
dee654cfe5 Put the cc253x custom makerules in its own customrules file 2014-01-26 23:20:41 +01:00
Adam Dunkels
7846eb2e2f Split the cc2430 custom rules into its own file 2014-01-26 23:20:40 +01:00
Adam Dunkels
36a5aadc9e Moved the 6502 custom rules into its own Makefile.customrules-6502 file 2014-01-26 23:20:40 +01:00
Fredrik Osterlind
cf32063c0b introduced optional Makefile.customrules-$(TARGET), to contain custom platform make rules 2014-01-26 23:20:39 +01:00
Adam Dunkels
7a740b382f Moved the individual MODULE definitions from the top-level Makefile.include into the individual platforms' Makefiles 2014-01-26 23:20:36 +01:00
Adam Dunkels
0fe08205e1 Moved the rimeaddr.[ch] code from the core/net/rime module to the core/net module, as it is used not only by rime code 2014-01-26 23:20:36 +01:00
Adam Dunkels
b02104e4c4 Add the sht11 device driver module to the z1 platform 2014-01-26 23:20:36 +01:00
Adam Dunkels
aaf0f83120 Add cxmac module to the sky platform 2014-01-26 23:20:35 +01:00
Adam Dunkels
9851ff85dd Add a sensible set of modules for the sensinode platform 2014-01-26 23:20:35 +01:00
Adam Dunkels
b40f1210e6 Don't use the sicslowmac code, use nullrdc instead 2014-01-26 23:20:34 +01:00
Adam Dunkels
e556ecbc25 Don't use the sicslowmac code, use nullrdc instead 2014-01-26 23:20:34 +01:00
Adam Dunkels
d7013524f9 Add a sensible set of modules for the micaz platform 2014-01-26 23:20:34 +01:00
Adam Dunkels
ee5299fe6e Add a sensible set of modules for the exp5438 platform 2014-01-26 23:20:33 +01:00
Adam Dunkels
51efdd952a Define MODULES for the avr-raven and the avr-ravenusb platforms 2014-01-26 23:20:33 +01:00
Adam Dunkels
34d46fa533 Include driver modules 2014-01-26 23:20:32 +01:00
Adam Dunkels
25367fb08c Moved the ds2411 driver into a dev/ds2411 module 2014-01-26 23:20:31 +01:00
Adam Dunkels
c9efe3c3c4 Moved the cc2520 driver into its own dev/cc2520 module 2014-01-26 23:20:31 +01:00
Adam Dunkels
4cfe6c4a5e Moved the sht11 driver to its own module 2014-01-26 23:20:30 +01:00
Adam Dunkels
d91bab9104 Include a basic set of modules 2014-01-26 23:20:28 +01:00
Adam Dunkels
0b805e4763 Moved the cc2420 driver into a separate dev/cc2420 module 2014-01-26 23:20:27 +01:00
Adam Dunkels
c80615913f Include the core/net and core/net/ip modules in the core/net/ipv4 module 2014-01-26 23:20:25 +01:00
Adam Dunkels
3a3e65a78d Use the MODULES mechanism for the native platform 2014-01-26 23:20:24 +01:00
Adam Dunkels
5f3fe7f7c7 Updated include paths for the moved files under net/ 2014-01-26 23:20:23 +01:00
Ian Martin
ed4edab461 eval-adf7xxxmb4z: Corrections to the platform README, update URLs to point to the mainline Contiki. 2014-01-24 12:49:16 -05:00
Oliver Schmidt
0258c413cc Merge pull request #539 from oliverschmidt/master 
Added more flexibility to webbrowser -> wget forwarding.
 2014-01-24 08:08:08 -08:00
Oliver Schmidt
1f4613383f Added more flexibility to webbrowser -> wget forwarding. 
- Up to now the CTK program handler was necessary to start wget and forward the URL. Now alternatively the webbrowser uses the underlying OS to exec wget.

- Up to now windowed CTK was necessary to display the acknowledge dialog. Now alternatively the webbrowser displays the acknowledge text and buttons right in the webpage area.

- For now the targets 'win32' and 'c64' make use of the new capabilities.
 2014-01-24 16:09:30 +01:00
Oliver Schmidt
8baf2d7b42 Merge pull request #536 from oliverschmidt/master 
Copied 'contiki_arg[c|v]' from 'native' to the other desktop targets.
 2014-01-24 03:41:42 -08:00
Oliver Schmidt
fc983e2e79 Copied 'contiki_arg[c|v]' from 'native' to the other desktop targets. 
- On the retro targets support for 'contiki_arg[c|v]' is optional as accesing arg[c|v] is rather expensive.
 2014-01-24 11:56:40 +01:00
Ian Martin
a897426410 Increase the default baudrate to 38400 bps for RL78. 2014-01-22 18:42:18 -05:00
Oliver Schmidt
510678bed0 Added mouse support for the Atari. 2014-01-20 22:51:40 +01:00
Oliver Schmidt
a24865de72 Add somewhat more support to use different mouse drivers. 
- The default mouse driver is now always named 'contiki.mou'.
- Alternative mouse drivers are present in the disk images.
- Users can select their mouse driver by renaming the files.
 2014-01-17 23:45:59 +01:00
Oliver Schmidt
fb20cf5ee6 Added UIP_CONF_LLH_LEN. 2014-01-17 22:07:03 +01:00
Ian Martin
85b439e33a Add eval-adf7xxxmb4z platform makefile. 2014-01-10 15:03:38 -05:00
Ian Martin
174d4dd80c Adds support for ADF7023 sub-GHz radio from Analog Devices and RL78 series MCU from Renesas. 
This example platform for this port is the EVAL-ADF7XXXMB4Z w/ radio
daughter cards:

    http://www.analog.com/en/evaluation/eval-adf7023/eb.html

See the platform readme for usage and platform information:

    https://github.com/contiki-os/contiki/tree/master/platform/eval-adf7xxxmb4z/readme.md

All files provided by Analog Devices for this port are released under
the same license as Contiki and copyright Analog Devices Inc. per
agreement between Redwire Consulting, LLC and Analog Devices Inc. (SOW 08122013)
 2014-01-04 18:56:51 -05:00
Oliver Schmidt
63725eff36 Merge remote-tracking branch 'upstream/master' 2013-12-12 20:46:43 +01:00
Oliver Schmidt
3b2173e01f Have CBM DOS filetype of imported files match the one used by cc65. 
CFS_WRITE implies O_TRUNC which is implemented on CBM DOS by deleting an
exsisting file. Hoewever this succeeds only if the CBM DOS filetype matches.

We need a working O_TRUNC in order to be able to overwrite the contiki.cfg
configuration file.

Note: Now it has be clarified why overwriting the configuration file started to
fail the CBM PFS (platform file system) can be activated for the recently added
ethconfig program.
 2013-12-12 18:57:40 +01:00
Benoît Thébaudeau
dbba311270 cc2538: Add adc driver and example 
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
 2013-12-06 22:07:45 +01:00
George Oikonomou
f2c552bb55 Merge pull request #478 from ADVANSEE/cc2538-startup-cleanup 
cc2538: Startup cleanup
 2013-12-05 11:07:19 -08:00
George Oikonomou
63298843b3 Merge pull request #491 from g-oikonomou/remove-lpp-from-readme 
Remove LPP discussion from the cc2538 README
 2013-12-05 11:07:03 -08:00
George Oikonomou
17b2150081 Merge pull request #463 from ADVANSEE/cc2538-ports-pins 
cc2538: Clean up and improve port and pin definitions
 2013-12-05 10:31:29 -08:00
George Oikonomou
6f22fd6642 Remove LPP discussion from the cc2538 README 2013-12-05 18:16:22 +00:00
Benoît Thébaudeau
a2686e581e cc2538: Add header file for flash CCA page and use it 
Create a dedicated header file with all the definitions for the flash lock bit
page and customer configuration area. This avoids duplicating those definitions
in the startup-gcc.c files of all CC2538-based platforms, and this also allows
to easily manipulate the CCA from outside startup-gcc.c (e.g. for on-the-air
firmware update).

The definitions are now complete contrary to what was in startup-gcc.c:
 - Definitions have been added to select the bootloader backdoor pin and active
   level if enabled.
 - Definitions have been added to access the page and debug lock bits. The debug
   lock bit can be used to prevent someone from reading back a programmed
   firmware through JTAG if the firmware binary image has to be confidential,
   which should be combined with a disabled bootloader backdoor.
 - The application entry point is now tied to the beginning of the .text section
   instead of to the beginning of the flash. This allows projects using custom
   linker scripts to place the application entry point anywhere in the flash,
   which can be useful e.g. for on-the-air firmware update.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
 2013-12-05 18:45:51 +01:00
Benoît Thébaudeau
65806f53eb cc2538dk: startup-gcc: Do not redefine SYS_CTRL_EMUOVR 
SYS_CTRL_EMUOVR is already defined in sys-ctrl.h, so #include this header file
instead of redefining SYS_CTRL_EMUOVR in startup-gcc.c.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
 2013-12-05 18:41:49 +01:00
George Oikonomou
acebfa2932 Merge pull request #466 from ADVANSEE/cc2538dk-slip-enable 
cc2538dk: Make it possible to override SLIP_ARCH_CONF_ENABLED
 2013-12-05 09:11:38 -08:00
Mariano Alvira
590b3f48a9 Merge pull request #477 from MariaLauraStefanizzi/eeprom 
i2c and eeprom drivers for mbxxx boards
 2013-12-02 09:20:14 -08:00
Mariano Alvira
86c593b7cd Merge pull request #481 from ismb-pert/fix-sleep 
Fix sleep
 2013-12-02 09:19:25 -08:00
Mariano Alvira
2ab24f4fc3 Merge pull request #387 from chrta/mb950_1_rev_B 
Added support for STM32w boards MB950 and MB951 revision B.
 2013-12-02 09:11:50 -08:00
Gianfranco Costamagna
ae27278714 Readded clock.c file, deleted in pull request #266, fixing issue #440 2013-12-02 11:38:07 +01:00
Adam Dunkels
0fd503af42 Removed the experimental checkpointing code 2013-11-28 14:09:17 +01:00
Maria Laura Stefanizzi
10c7066035 mbxxx eeprom driver 
This patch adds the eeprom driver needed to access M24C64
eeprom which is on some mbxxx boards.
Signed-off-by: Maria Laura Stefanizzi <laura28582@gmail.com>
 2013-11-27 15:40:07 +01:00
Maria Laura Stefanizzi
22f39ab4ff MEMS I2C integration. 
This patch allows the MEMS driver to use the i2c driver.
Signed-off-by: Maria Laura Stefanizzi <laura28582@gmail.com>
 2013-11-27 15:40:07 +01:00
Maria Laura Stefanizzi
a9c0768fd6 Integrate I2C driver into board initializzation 
This patch add I2C initializzation for board with I2C devices.
Signed-off-by: Maria Laura Stefanizzi <laura28582@gmail.com>
 2013-11-27 15:40:07 +01:00
Maria Laura Stefanizzi
c7b1248aac mbxxx I2C driver. 
This patch add the I2C driver for mbxxx platform to communicate with
devices connected to the SC2 I2C bus.
Signed-off-by: Maria Laura Stefanizzi <laura28582@gmail.com>
 2013-11-27 15:40:07 +01:00
Adam Dunkels
0d04db2b03 Merge pull request #428 from g-oikonomou/config-sanity 
Remove unnecessary stuff from various Makefiles (Config Sanity, Pt 1)
 2013-11-26 15:05:08 -08:00
Benoît Thébaudeau
436b585d7e cc2538dk: Make it possible to override SLIP_ARCH_CONF_ENABLED 
As the comment in contiki-conf.h says, the automatic definition of
SLIP_ARCH_CONF_ENABLED works only if UIP_FALLBACK_INTERFACE is tied to SLIP. If
UIP_FALLBACK_INTERFACE is set to another interface, SLIP_ARCH_CONF_ENABLED is
still automatically set to 1, leading to unwanted SLIP_END characters from
dbg.c:putchar() being printed on the UART.

This change makes it possible to force the definition of SLIP_ARCH_CONF_ENABLED
(e.g. from project-conf.h), so that it can be disabled if UIP_FALLBACK_INTERFACE
is used with something else than SLIP.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
 2013-11-25 20:48:52 +01:00
Benoît Thébaudeau
d2f3795a30 cc2538: Clean up port and pin definitions 
Homogenize port and pin definitions naming:
 - PERIPHERAL_FUNCTION_PORT for the port ID,
 - PERIPHERAL_FUNCTION_PIN for the pin ID,
 - PERIPHERAL_FUNCTION_PORT_BASE for the port base,
 - PERIPHERAL_FUNCTION_PIN_MASK for the pin mask.

Define only PERIPHERAL_FUNCTION_PORT and PERIPHERAL_FUNCTION_PIN in board.h, and
deduce PERIPHERAL_FUNCTION_PORT_BASE and PERIPHERAL_FUNCTION_PIN_MASK in the
driver from the former definitions.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
 2013-11-25 15:00:41 +01:00
Adam Dunkels
bb2dcaa057 A massive all-tree automated update of all double inclusion guard #defines that changes from using two underscores as a prefix, which are reserved, to not using two underscores as a prefix 2013-11-24 20:20:11 +01:00
Adam Dunkels
19b32c54c0 Removed the old unused hc.[ch] code 2013-11-24 11:02:35 +01:00
Adam Dunkels
cb8fc35e25 Removed the redbee platforms 2013-11-22 16:33:06 +01:00
Adam Dunkels
eb99534c43 Removed the stk500/stk501 platforms 2013-11-22 16:33:06 +01:00