Commit Graph

2488 Commits

Author SHA1 Message Date
Oliver Schmidt
91beb8670f Added SLIP support to retro platforms.
The cc65 tool chain comes with V.24 drivers so it seems reasonable to use the existing Contiki SLIP driver to implement network access via SLIP as alternative to Ethernet.

Some notes:
- The Ethernet configuration was simplified in order to allow share it with SLIP.
- The Contiki SLIP driver presumes an interrupt driven serial receiver to write into the SLIP buffer. However the cc65 V.24 drivers aren't up to that. Therefore the main loops were extended to pull received data from the V.24 buffers and push it into the SLIP buffer.
- As far as I understand the serial sender is supposed to block until the data is sent. Therefore a loop calls the non-blocking V.24 driver until the data is sent.

On all platforms there's only one V.24 driver available. Therefore V.24 drivers are always loaded statically.

On the Apple][ the mouse driver is now loaded statically - independently from SLIP vs. Ethernet. After all there's only one mouse driver available. However there's a major benefit with SLIP: Here all drivers are loaded statically. Therefore the dynamic module loader isn't necessary at all. And without the loader the heap manager isn't necessary at all. This allows for a reduction in code size roughly compensating for the size of the SLIP buffer.
2017-02-15 23:43:28 +01:00
Oliver Schmidt
6463c91a4f Removed artifacts of former uip_appdata handling.
Adam Dunkels writes on 2/5/2017 on the Contiki mailing list:
[...] the original idea was that the application could just point the uip_appdata pointer to wherever the data was, but we then changed it so that the data actually had to be copied into the uip_aligned_buf buffer. So, yes, the network device driver should only need to read from this buffer. [...]

This change removes comments on the possibility of uip_appdata pointing somewhere outside the uip_aligned_buf. And it removes code in the SLIP drivers not necessary anymore.

Additionally it makes code in a SLIP driver optional that takes care of the Microsoft-specific CLIENT / SERVER / CLIENTSERVER chat.
2017-02-05 23:20:39 +01:00
Oliver Schmidt
a6472c8dd9 Revert to static Ethernet driver for the ATARI.
After all there's no momentum for a W5100-based Ethernet solution on the ATARI. So I revert to static linkage of the CS8900A driver as this improves program load times.
2017-01-27 00:18:25 +01:00
Antonio Lignan
10d54f228b Orion: update motelist string
Updates the expected motelist string
2017-01-12 11:23:20 +01:00
George Oikonomou
960b81d484 Merge pull request #2024 from alignan/pull/eth-gw
Zolertia Orion ethernet router with active POE support
2017-01-09 21:03:45 +00:00
Antonio Lignan
6e07fd7019 Merge pull request #2001 from joakimeriksson/cooja-quick-ui-fix
fixed so that Cooja can run in quick mode when having UI
2017-01-03 10:26:52 +01:00
Antonio Lignan
579620ce0e Added Zolertia Orion ethernet router with active POE support 2016-12-29 13:07:53 +01:00
Antonio Lignan
2464cdadc9 Merge pull request #1973 from g-oikonomou/contrib/sensniff-submodule
Add sensniff as a submodule
2016-12-25 19:42:18 +01:00
Joakim Eriksson
f069cef73a fixed so that Cooja can run in quick mode when having UI 2016-12-15 13:52:05 +01:00
Simon Duquennoy
bba5a973ba Merge pull request #1987 from joakimeriksson/cooja-fix
Fixed COOJA to avoid using UI based message list when not using UI.
2016-12-15 08:40:03 +01:00
Niclas Finne
a02481bc99 Fixed more MessageListUI to respect visualized in Cooja 2016-12-14 10:10:25 +01:00
Nicolas Tsiftes
8fca9ced8e Merge pull request #1976 from yatch/pr/missing-single-quote
Resolve  "unmatched single quote" error in Travis CI failed tests
2016-12-12 17:06:16 +01:00
Joakim Eriksson
2a3edc9136 Fixed so that COOJA sends in isVisible instead of quick as visibility parameter to plugins to get compile info back into COOJA - and fixed CoreComm to use MessageList text if no UI 2016-12-11 20:52:03 +01:00
Yasuyuki Tanaka
f5d6b7ed0f ContikiMoteType: add a missing single quote in a log message
This resolves the error of "unmatched single quote" by xargs seen in a
failed log of Travis CI.
2016-12-05 18:07:39 +01:00
George Oikonomou
11877b4b6b Add sensniff as a submodule 2016-12-04 18:43:17 +00:00
Antonio Lignan
af4f1e1c30 Merge pull request #1866 from yschroeder/pull-req/serialdump
Improved serialdump.c
2016-12-04 13:17:39 +01:00
Simon Duquennoy
728e417e04 Merge pull request #1502 from yatch/pr-radiologger
Fix timestamps of packets recorded in pcap files
2016-11-27 11:58:03 +01:00
Simon Duquennoy
ecd1d57eec Merge pull request #1661 from yatch/pr-tsch-cooja-mote
TSCH on Cooja mote
2016-11-23 11:59:29 +01:00
Oliver Schmidt
72cc19c680 Fixed ProDOS 800kB image.
The 800kB file claimed to be a 32MB image. Now the logical size and pysical size match.
2016-10-11 11:18:23 +02:00
Niclas Finne
e648373677 Cooja now supports Wismote and Z1 motes when exporting simulations as
executable JAR.
2016-09-22 10:56:56 +02:00
Yannic Schröder
d524211c2a Clean exit of serialdump when hitting Ctrl-C
Ctrl-C is the best way to close serialdump after using make login.
With a clean exit it will signal to make that the make run was successful.
2016-09-20 14:18:21 +02:00
Yannic Schröder
9e080e8aa5 Terminate serialdump when serial device disconnects
The running serialdump does not recover from a disconnected device but
runs indefinitely with outputting anything. This makes it quit with a
proper error message.
2016-09-20 14:16:40 +02:00
Yannic Schröder
2974b796d1 Initialize serialdump termios properly
termios i_flags were not initialized and could be set to arbitrary values
this resulted in unpredicted behaviour of the output like additional
newlines
2016-09-20 14:14:14 +02:00
Yasuyuki Tanaka
6d51c5f58e Reimplement Rtimer of Cooja mote as a microsecond resolution timer 2016-09-06 15:14:10 +02:00
Yasuyuki Tanaka
33e86042e5 Support RADIO_PARAM_LAST_PACKET_TIMESTAMP with get_object() 2016-09-06 15:14:10 +02:00
Yasuyuki Tanaka
ca715fdd6b Use appropriate types for "value" of setInt{16,32,64}ValueOf() 2016-09-06 15:14:10 +02:00
Antonio Lignan
23eb3756c0 Zoul: added firefly to motelist targets 2016-08-12 13:21:09 +02:00
Oliver Schmidt
98a795b967 Merge pull request #1730 from groessler/something_to_pull
Some 6502 target changes
2016-07-06 09:17:39 +02:00
Christian Groessler
4373aecec2 Tag non-file goals as ".PHONY" 2016-07-05 00:47:52 +02:00
Antonio Lignan
bc8b6cd8ed Updated cc2538-bsl to version 2.1 (c6100a7) 2016-06-24 22:10:39 +02:00
Christian Groessler
c26085ec8c Some 6502 target changes
- platform/atarixl/Makefile.atarixl: put two more objects into high memory
- platform/atarixl/contiki-conf.h: define WWW_CONF_WGET_EXEC
- tools/6502/Makefile: add 'clean' target; remove unused CONTIKI define
2016-06-17 16:42:50 +02:00
Fredrik Österlind
0313a429e2 Merge pull request #1575 from atiselsts/cooja_bit_errors
Cooja: add Msp802154BitErrorRadio interface
2016-06-06 11:39:45 +02:00
Fredrik Österlind
5f7e77b3f9 Merge pull request #1307 from cmorty/pull/uninitmotes
Cooja: Make sure motes are always removed from the list of unintialized motes
2016-06-06 10:55:29 +02:00
Oliver Schmidt
0151a7c27e Merge pull request #1706 from oliverschmidt/master
Make use of new cl65 option --print-target-path.
2016-06-03 15:13:08 +02:00
Oliver Schmidt
ae0c5f0dd0 Make use of new cl65 option --print-target-path.
The new cl65 option --print-target-path allows to get rid of CC65_HOME altogether.
2016-06-03 13:30:25 +02:00
Jens Dede
cd7885ae76 do not use setBaudrate 2016-05-02 18:48:16 +02:00
Joakim Eriksson
19120788c0 made a text-based version of the MessageList for headless execution 2016-04-27 19:32:14 +02:00
Nicolas Tsiftes
204dcb9bbc Merge pull request #1332 from tsparber/collect-view-add-osx
collect-view gui: Add support for OS X serialdump and motelist
2016-04-20 11:57:12 +02:00
Atis Elsts
c7c3ef3b9c Cooja: add Msp802154BitErrorRadio interface
The interface more accurately models bit errors due to signal fading as observed in IEEE 802.15.4-compatible radios, such as CC2420 and CC2520.
2016-03-31 13:41:16 +03:00
Yasuyuki Tanaka
15d30b1125 Make PcapExporter record timestamps with preserving packet intervals 2016-03-30 18:26:20 +02:00
Rémy Léone
60acf7de98 fix SerialSocketServer when run without GUI 2016-03-16 18:48:09 +01:00
Simon Duquennoy
dea04c67d7 Change the default IPv6 prefix from aaaa::/64 to fd00::/64 2016-03-07 17:47:44 +01:00
Simon Duquennoy
c7bb3b7b9f Merge pull request #1309 from iot-lab/tunslip_tun_conflict
Fix default tun/tap issue with multiple tunslip6
2016-03-02 09:53:00 +01:00
Jelmer Tiete
d7ee563023 Updates cc2538-bsl to 4340542, main changes are fix for contiki-os/contiki#1533 and an added option to invert the RTS and DTR lines when auto starting the bootloader 2016-02-29 13:48:24 +01:00
George Oikonomou
707353f71b Remove Sensinode platform, cpu, example and tools files
This is part of a set of commits that will obsolete the Sensinode platform
2016-01-10 15:01:58 +00:00
Joakim Eriksson
e4744d1e59 fixed make login for Zoul on MAC 2015-12-19 10:28:30 +01:00
Tommy Sparber
1eb1f88aa4 collect-view gui: Add support for OS X serialdump and motelist
Select the tools for macos when checking for motes or opening a
serial dump connection on OS X.
2015-12-02 14:37:36 +11:00
Antonio Lignan
27fd1a5eb8 Updated RE-Mote revision A support and cleaning up Zolertia platforms 2015-11-24 21:15:33 +01:00
Jelmer Tiete
6a40a4b749 Updated cc2538-bsl submodule to 6185d8b, small bugfix 2015-11-23 11:09:06 -08:00
Jelmer Tiete
80e29ad6a0 Pulled in cc2538-bsl submodule v2.0 (f1f070d) 2015-11-23 11:07:19 -08:00