Commit Graph

112 Commits

Author SHA1 Message Date
Simon Duquennoy
dea04c67d7 Change the default IPv6 prefix from aaaa::/64 to fd00::/64 2016-03-07 17:47:44 +01:00
Konrad Krentz
b522c042ec llsec: Replaced bootstrap function with a simple init function 2015-10-14 08:21:40 -07:00
Atis Elsts
2f79810b58 Use ENERGEST_SWITCH to switch between different power modes to improve energest accuracy. 2015-09-04 11:46:00 +02:00
Simon Duquennoy
a9cc909794 Network layer configuration: replace UIP_CONF_* with NETSTACK_CONF_WITH_* 2014-12-01 21:02:57 +01:00
Simon Duquennoy
722b3258d1 Cleanup of the Contiki network layer configuration. Now using CONTIKI_WITH_IPV6, CONTIKI_WITH_IPV4, and CONTIKI_WITH_RIME in makefiles, and UIP_CONF_IPV6, UIP_CONF_IPV4, UIP_CONF_RIME in c code. Now only the stacks that are used are compiled (via makefile MODULES). Make IPv6 the default network stack. 2014-12-01 20:13:09 +01:00
Moritz 'Morty' Strübe
c0783e2841 sky: Initialize energest as early as possible
If energest is initialized too late, the radio is not accounted
until the first switch. This is a problem when the radio is always
listening.
2014-10-09 09:42:56 +02:00
kkrentz
7943751b16 Sky: DEBUG on/off switch 2014-08-04 01:09:57 -07:00
kkrentz
c7b394c51b Sky: Calling NETSTACK_LLSEC.bootstrap from contiki-sky-main.c 2014-08-04 01:09:57 -07:00
Niclas Finne
b13b5fc9ac Fixed typo to correctly print the radio channel at startup 2014-03-28 11:54:12 +01:00
Adam Dunkels
45265249fc Changed the name of the rimeaddr module to linkaddr 2014-01-29 20:12:24 +01:00
Adam Dunkels
8eace27f9b Moved net/rime.h to net/rime/rime.h 2014-01-26 23:20:45 +01:00
Adam Dunkels
25367fb08c Moved the ds2411 driver into a dev/ds2411 module 2014-01-26 23:20:31 +01:00
Adam Dunkels
0b805e4763 Moved the cc2420 driver into a separate dev/cc2420 module 2014-01-26 23:20:27 +01:00
Adam Dunkels
c80615913f Include the core/net and core/net/ip modules in the core/net/ipv4 module 2014-01-26 23:20:25 +01:00
Adam Dunkels
5f3fe7f7c7 Updated include paths for the moved files under net/ 2014-01-26 23:20:23 +01:00
Adam Dunkels
523c03e4b8 Removed old unused profile.h code 2013-11-19 08:31:52 +01:00
Moritz 'Morty' Strübe
c67c048cac Clean up setting channel and CCA-threshold for CC2420 based motes.
The CCA-threshold now defaults to -46 which give better simulation
results and typically also better experimental results.
This adjustment is also needed due to commit 0a13f99 in mspsim. As
promised in https://github.com/mspsim/mspsim/pull/18 it broke the
regression tests.
2013-11-07 17:28:33 +01:00
Adam Dunkels
ec8c7e9be0 Cleanup of the node-id.h files. The node-id.h file contains
declarations of functions for setting and getting a node ID number, a
functionality that exists on many platforms. Since this functionality
was not considered part of the Contiki core, each platform defined its
own node-id.h file. This commit attempts to clean this up by
collecting the node-id.h into a core/sys/node-id.h file that replaces
the old node-id.h files from the platform directories.
2012-11-20 19:59:46 +01:00
Adam Dunkels
944537fccf Removed all old RCS tags in the Contiki source tree. Those RCS tags are not used any more, as we are now using git to manage the Contiki source tree 2012-10-26 15:54:49 +02:00
Fredrik Osterlind
d270e4943d bugfix: slip must be initialized after ctimer, as it uses ctimers 2012-05-30 12:59:42 +02:00
Fredrik Osterlind
4cf4a48592 minor bugfix: did not compile with PROCESS_CONF_NO_PROCESS_NAMES=1 2012-05-09 15:07:51 +02:00
Joakim Eriksson
5b1d9617c4 moved io and signal and IAR-GCC checks from driver files into contiki include file 2011-09-26 10:38:41 +02:00
Joakim Eriksson
95dde73618 fixed Sky platform for IAR compiler 2011-09-11 17:18:02 +02:00
Niclas Finne
a199ae920e Changed the order in which io.h and signal.h is included. Some versions of mspgcc4 seem to have a problem when signal.h is included before io.h. 2011-03-07 20:54:02 +01:00
Fredrik Osterlind
747eafd5f0 support for tinyos style node ids, to simplify testbed experiments
with automatic node ids
2011-02-11 15:27:14 +01:00
adamdunkels
a6fe42f60f Restart CC2420 SFD interrupt after DCO calibration only if it is enabled. 2011-01-09 21:03:42 +00:00
joxe
2e1c856741 added support for avoiding sleeping in LPM3 when DCO needs to be running - needed for uart DMA 2011-01-05 12:04:23 +00:00
adamdunkels
37e65264a8 Hack: reenable cc2420 SFD interrupts after resyncing the DCO. The DCO code currently messes up the SFD interrupt settings. 2010-12-16 22:52:12 +00:00
joxe
97fc9d2ee8 no aaaa address if configured for RPL 2010-05-25 21:32:41 +00:00
joxe
50cca91d93 made use of the new link-local address api in ds6 2010-05-09 17:53:31 +00:00
nifi
7cebc4ed99 added missing include 2010-05-03 13:55:26 +00:00
nifi
bf198ec695 Moved sensors setup to contiki-sky-platform.c and common make rules to Makefile.common for easier reuse in similar platforms 2010-05-03 13:51:11 +00:00
joxe
aa980e3f67 removed initialization of RPL from platform main 2010-05-01 13:07:31 +00:00
joxe
b0640af3a2 added rpl support for tmote sky - enabled by default 2010-04-30 13:52:14 +00:00
joxe
29335f2f7d added possibility to hard-code 7 bytes of the MAC address - last byte picked from nodeid 2010-03-19 14:08:15 +00:00
adamdunkels
fc61ee5dbb Bugfix: turn on watchdog before starting processes to avoid a process hanging in its startup phase 2010-03-19 13:28:27 +00:00
joxe
7d220c910a removed uip_router 2010-03-16 15:45:20 +00:00
joxe
fd3d6c44d0 integration of new uip6 code from Mathilde and Julien - adds routing and improved interface handling 2010-03-15 16:41:24 +00:00
nifi
1025e7337c Added configurable router module 2010-03-01 14:46:57 +00:00
nifi
5e43a6998b Replaced old framer (framer_get/framer_set) with new NETSTACK style configuration. Added nullrdc-framer that is a nullrdc with framer support. 2010-03-01 13:30:21 +00:00
nifi
07ee8458e7 Fixed bootup printf() with 32-bit timer values 2010-02-23 21:02:30 +00:00
nifi
bb9d430138 added bootup print of NETSTACK_RDC name 2010-02-23 20:54:09 +00:00
adamdunkels
85a9f7db42 Fix bootup printf() with 32-bit timer values 2010-02-23 18:45:16 +00:00
adamdunkels
e34eb54960 A work-in-progress rework of the Contiki MAC and radio layers. The
main ideas are:

* Separates the Contiki low-layer network stack into four layers:
  network (e.g. sicslowpan / rime), Medium Access Control MAC
  (e.g. CSMA), Radio Duty Cycling RDC (e.g. ContikiMAC, X-MAC), and
  radio (e.g. cc2420).
* Introduces a new way to configure the network stack. Four #defines
  that specify what mechanism/protocol/driver to use at the four
  layers: NETSTACK_CONF_NETWORK, NETSTACK_CONF_MAC, NETSTACK_CONF_RDC,
  NETSTACK_CONF_RADIO.
* Adds a callback mechanism to inform the MAC and network layers about
  the fate of a transmitted packet: if the packet was not possible to
  transmit, the cause of the failure is reported, and if the packets
  was successfully transmitted, the number of tries before it was
  finally transmitted is reported.
* NULL-protocols at both the MAC and RDC layers: nullmac and nullrdc,
  which can be used when MAC and RDC functionality is not needed.
* Extends the radio API with three new functions that enable more
  efficient radio duty cycling protocols: channel check, pending
  packet, and receiving packet.
* New initialization mechanism, which takes advantage of the NETSTACK
  #defines.
2010-02-18 21:48:39 +00:00
adamdunkels
aaab082f27 Correctly print out the aaaa: address, if enabled 2010-02-06 10:00:49 +00:00
adamdunkels
f9e991c0dd Turning of the MAC protocol in the IPv4-over-mesh actually made performance worse due to broadcasts being received multiple times, which interfered with SLIP I/O 2010-02-03 01:20:47 +00:00
adamdunkels
88fb1c80c9 Do not activate the sensors by default: sensors should be activated by the applications that need them 2010-02-02 16:25:30 +00:00
adamdunkels
d0d52638b8 Disable (debugging-) initialiation of aaaa:: address; add CSMA MAC for IPv6/6lowpan 2010-02-01 11:55:04 +00:00
adamdunkels
5922402b3e Added the CSMA MAC mechanism on top of the default duty cycling
mechanism X-MAC. The CSMA is configurable with a MAC_CSMA define, just
like the MAC protocol is configurable with the MAC_DRIVER define.
2010-01-25 11:48:16 +00:00
adamdunkels
11362d0489 Remove the default list of sensors from the main() file to save space - those apps that need them can use them directly in any case 2010-01-21 11:17:08 +00:00