dak664
5b8e62ef4f
Patches from R Larsson
2010-12-22 20:10:00 +00:00
dak664
013c3ac2f8
Remove contitional on clock updating, it should always be done after a sleep!
2010-12-22 17:09:03 +00:00
dak664
44a2e34005
Resolve TIMER2 conflict between sleep and possible clock usage.
2010-12-22 16:50:30 +00:00
dak664
e3e1e04948
Add FCS comments and text2pcap dump routines of Roger Larsson.
...
Don't send last two byte to xmit buffer since they will be overwritten by the checksum anyway.
2010-12-21 04:25:15 +00:00
dak664
e4b0b3dc8c
Disable watchdog software counter. Nested watchdog stop/starts will not work, but the low power protocols will.
2010-12-18 20:51:11 +00:00
dak664
5623ad827b
Enable radio off and sleep modes.
2010-12-18 20:49:00 +00:00
dak664
570f6e705f
Move conditional needed by previous commit.
2010-12-15 19:32:49 +00:00
dak664
aa7ad8c807
Add rf230_listen_channel routine to force RX_ON state for sniffing and to read rssi for energy scan.
2010-12-15 16:50:44 +00:00
dak664
1cc336f188
Conditional code to use hardware multiply by default.
2010-12-15 14:11:06 +00:00
dak664
c784e8bc46
Enable RX_START interrupt and read rssi at end of preamble when not using energy detect register
2010-12-14 22:34:18 +00:00
dak664
9c9d7ec5e9
Return TRAC_STATUS register when tx autoretry is enabled.
2010-12-05 17:28:29 +00:00
dak664
35b2ce0cdb
Add status page link, show correct rssi, fix indexing off array in ipv4 builds
2010-12-04 21:32:35 +00:00
dak664
58b7a19803
Hardware/software radio HAL patch from Roger Larsson.
...
Use CHANNEL_802_15_4 define for RF channel on all AVR platforms, default 26.
Remove hopefully unnecessary interrupt disable wrapper on eeprom reads and writes.
2010-12-03 20:42:01 +00:00
dak664
21b10e8021
Convert obsolete MCU_MHZ to F_CPU and add 14745600MHz case using patch from Tobias Schäfer
2010-12-03 18:16:56 +00:00
dak664
0ba9846abd
Add macros by Roger Larsson to select between hardware or software SPI transactions.
...
Minor speed optimizations.
2010-11-30 19:47:40 +00:00
dak664
dc028b3f85
Get rssi correctly in either rx mode, clean up radio driver debugging
2010-11-26 20:39:15 +00:00
dak664
880233a451
RSSI read fix (use ED register in AACK mode), add reduced power configuration for miniature mesh testing.
2010-11-24 18:46:57 +00:00
dak664
69ef9d57eb
sizeof(*) is sizeof first array element
2010-11-12 17:24:36 +00:00
dak664
9e94ba9803
Allow non-ipv6 build, e.g. Hello World
2010-11-12 17:15:00 +00:00
dak664
eb0d5c7f45
Add missing includes
2010-11-03 16:55:40 +00:00
dak664
9194b3ac69
Fix error when RS232 not enabled
2010-10-28 19:31:28 +00:00
dak664
ad6712736b
Fix Windows XP RNDIS+CDC serial port enumeration
2010-10-28 19:30:14 +00:00
dak664
258e3cc93a
Allow simultaneous use of RS232 and USB serial ports
2010-10-27 14:51:20 +00:00
dak664
123e3cae41
Fix compiler warnings
2010-10-23 15:26:46 +00:00
dak664
7be7a34bbb
Fix windows COM port enumeration
2010-10-22 19:15:43 +00:00
dak664
774474b7aa
Fix compiler warning
2010-10-20 18:57:33 +00:00
adamdunkels
5585d72c86
A simple but substantial change: uIP used the htons()/HTONS() macro
...
functions for converting between host and network byte order. These
names are the de facto standard names for this functionality because
of the original BSD TCP/IP implementation. But they cause problems for
uIP/Contiki: some platforms define these names themselves (Mac OS,
most notably), causing compilation problems for Contiki on those
platforms.
This commit changes all htons to uip_htons instead. Same goes for
htonl, ntohs, and ntohl. All-caps versions as well.
2010-10-19 18:29:03 +00:00
dak664
110bc0242e
Merge CDC-ECM, RNG, DFU bootloader, watchdog, settings manager, energy scan routines of Robert Quattlebaum
2010-09-17 21:59:09 +00:00
joxe
0c5390339f
updated to new cc2420 spi naming
2010-06-23 10:44:41 +00:00
dak664
898c00b812
Remove usually extra avr-size command
2010-06-22 17:11:38 +00:00
dak664
e45b1c042b
TIMER2 uses TIMER2 interrupt vector!
2010-06-22 16:17:24 +00:00
dak664
ab7f3bd8e3
Option to use 32768Hz watch crystal for timing. Code suggested by Georg von Zengen.
2010-06-18 17:30:30 +00:00
dak664
cb45883970
Turn on DEBUGFLOW and software CRC computation
2010-06-18 15:44:53 +00:00
adamdunkels
3fa8ffda1a
Moved the modules packetbuf, queuebuf, and packetqueue from net/rime to net/, since they are not Rime-specific
2010-06-14 19:19:16 +00:00
dak664
972e2f5d4f
Add MCU to avr-size command; Remove fuse and signature from .hex; Give bootloader more memory
2010-05-04 14:14:49 +00:00
dak664
0265f09a5c
Add RS232 port option to jackdaw USB stick
2010-03-15 18:52:55 +00:00
dak664
01a3912864
Define and use radio STATE_TRANSITION, improve debug messaging
2010-03-02 16:29:59 +00:00
dak664
39e6f6a830
Clean up, functional webserver for further testing of low power protocols
2010-02-28 21:29:19 +00:00
dak664
d61676b8f7
Add RADIOALWAYSON to monitor packet losses with low power protocols
2010-02-28 21:19:33 +00:00
dak664
5debc183a9
Enable radio stats in sensor cgi as default
2010-02-26 21:38:57 +00:00
dak664
844b3a34f7
Platform 0 was matching by default
2010-02-26 21:15:28 +00:00
dak664
195f5939c4
Clean up after testing
2010-02-26 20:51:48 +00:00
dak664
7274f1d1ed
Report operating channel with either radio driver
2010-02-23 17:40:09 +00:00
dak664
4ded42db1e
Add sniffer and 802 frame reporting
2010-02-23 17:37:51 +00:00
dak664
b4bc7fc3da
Make RF230BB the default radio driver
2010-02-23 02:01:46 +00:00
dak664
cbb8621e30
update to new driver format
2010-02-22 22:23:18 +00:00
dak664
658c35df11
remove debug printf
2010-02-22 22:21:15 +00:00
dak664
a83381de30
add rtimers for cxmac
2010-02-18 17:21:44 +00:00
dak664
fee5efb141
additions for cxmac
2010-02-18 17:20:50 +00:00
dak664
98b69e1bff
No sniffer yet for RF230BB
2010-02-16 22:55:20 +00:00
dak664
23f6949af6
RF230BB addition
2010-02-16 22:51:40 +00:00
dak664
b0930cf2ec
Move rtimer-arch.c inclusion from platform to cpu
2010-02-16 21:56:15 +00:00
dak664
0f59ba3187
Add rtimers, allow Jackdaw to use RF230BB driver
2010-02-16 21:48:38 +00:00
dak664
893a31f49b
Jackdaw additions
2010-02-16 21:41:24 +00:00
dak664
8603f0f0f6
Add RADIOSTATS
2010-02-12 18:00:30 +00:00
dak664
a6ab27402a
Add RADIOSTATS
2010-02-12 16:41:02 +00:00
dak664
eb2ac1a154
Make seconds a global variable, add optional radio on time
2010-02-12 14:37:50 +00:00
adamdunkels
dea4826f94
Added watchdog.c to the USB stick code
2010-02-07 23:05:20 +00:00
adamdunkels
091483c150
Added dummy watchdog functions for all AVR platforms
2010-02-07 07:43:35 +00:00
c_oflynn
95d0b09954
-Fix that can cause USB stick to freeze up
...
-Add EEM Support
2010-02-04 10:40:00 +00:00
c_oflynn
15ffaeed86
Fix for error where USB host could send NAK, but isn't considered in jackdaw, resulting in jackdaw hanging
2010-01-24 13:01:58 +00:00
joxe
3e8c63cc09
added radio-makefile for avr + rf230 platforms
2009-09-07 12:05:12 +00:00
joxe
8890904aa2
moved radio specifics out of avr Makefile and added some rs232 defs in order to get MicaZ platform working
2009-09-07 12:02:58 +00:00
dak664
e64b3d8465
Experimental 64 bit Windows 7 drivers. They work with my Phenom.
2009-08-07 16:45:30 +00:00
dak664
283d288f1a
Allow hello-world to build, fix makefile ignoring rf230bb
2009-07-26 12:10:38 +00:00
dak664
c1b7375a5a
*** empty log message ***
2009-07-23 16:13:48 +00:00
dak664
7af93463b5
Remove compiler warnings
2009-07-23 16:10:42 +00:00
dak664
c62efce258
Add useful comment, fix compiler warnings
2009-07-17 13:47:10 +00:00
dak664
1de298c72a
*** empty log message ***
2009-07-08 16:17:07 +00:00
dak664
49989dbe45
Add rf230bb radio driver with conditional make on RF230BB=1
2009-07-08 15:26:17 +00:00
dak664
9aee8dbc16
Fixed bug of no current consequence
2009-07-05 18:50:44 +00:00
nifi
1c6264fddc
reordered build path to use cpu files before core
2009-04-06 13:10:14 +00:00
nifi
43c2ccf5d8
fixed clock_seconds to use full 32 bit
2009-04-06 13:08:42 +00:00
adamdunkels
727c5a2dbe
Renamed serial module to serial-line
2009-03-17 20:32:22 +00:00
adamdunkels
65eb5fd4e8
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 21:58:20 +00:00
c_oflynn
5ec6412fbc
*Support for Atmel 'Router Under Mac' (RUM) in Jackdaw
2008-12-10 21:26:05 +00:00
c_oflynn
c0e2fd1110
Oops - as pointed out by Daniel Willmann change had a duplicate statement... fixed!
2008-11-29 18:36:12 +00:00
c_oflynn
9fb2c9d836
* Addition of Meshnetics Zigbig platform by Frederic Thepaut <frederic.thepaut@inooi.com>
...
* Changed default RavenUSB timeout to 3 seconds... seems to give most reliable transmissions
2008-11-29 15:55:02 +00:00
c_oflynn
5ff23c0bec
Addition of Atmel Radio Control Board (RCB), device in RZ200 kit
2008-11-09 15:39:49 +00:00
c_oflynn
b6e76a4947
Fixed serious bug which causes RNDIS task to end when non-data message are sent via RNDIS interface
2008-11-08 17:11:18 +00:00
c_oflynn
f13ec95efa
*** empty log message ***
2008-11-08 03:29:15 +00:00
c_oflynn
e1463c25a0
Fixed bug that non-IPv6 would hang Jackdaw
2008-11-07 20:32:46 +00:00
c_oflynn
46853d9395
* Channel is saved in EEPROM
...
* Allow serial port to work with more term emulators
2008-10-27 18:03:25 +00:00
c_oflynn
ebb335335a
*Added ability to change channel Jackdaw (raven USB) operates on over serial menu
2008-10-26 01:27:55 +00:00
c_oflynn
219846f408
Addition of USB files
2008-10-14 20:16:36 +00:00
c_oflynn
a520fe4646
Lots of changes / commits! This allows ravenusbstick example to build at least.
2008-10-14 19:06:51 +00:00
c_oflynn
6e3ee0d917
More updates for raven
2008-10-14 18:38:09 +00:00
c_oflynn
a73ed65dac
Fixing more possible out of date files.
2008-10-14 18:37:28 +00:00
c_oflynn
15ba03fea5
Adding updated files
2008-10-14 18:36:07 +00:00
c_oflynn
9cc14d43ef
Fixing some files...
2008-10-14 18:35:29 +00:00
adamdunkels
cdb6226598
Changes to support the Atmel AVR Raven port
2008-10-14 09:44:12 +00:00
adamdunkels
db7d9bb131
Radio and 802.15.4 MAC code for the Atmel AVR Raven board
2008-10-14 09:43:40 +00:00
oliverschmidt
604a9c2bf0
Removed (now obsolete) PROCESS_LOADABLE.
2008-02-07 19:56:56 +00:00
joxe
f997ec6231
fixed defs and to compile for atmega32 also - has no TCNT3
2007-12-11 17:21:14 +00:00
fros4943
3a0ba03407
added experimental avr rtimer-arch implementation
...
8 seconds wraparound
2007-11-29 02:44:05 +00:00
fros4943
2564882015
only create full symbols list if SYMBOLS is defined
2007-11-23 06:22:52 +00:00
fros4943
53ea3cd7bf
removed symbols from .elf output (but always included with .out)
...
+ uncommented unused %.ce target (check Makefile.include to enable it)
2007-11-16 09:19:22 +00:00
fros4943
deeed3389a
added dummy RTIMER definition
2007-11-01 16:26:58 +00:00
fros4943
559e3eb6ea
removed platform specific definitions
...
+
changed default linker to gcc (as for the default linker arguments)
2007-11-01 16:26:31 +00:00
bg-
0fedf8845d
* Standard defines for AVR.
2007-08-16 13:20:09 +00:00
oliverschmidt
75f04995a9
Changed packet drivers from services to plain processes.
...
Now tcpip_output() is a function pointer that is supposed to be set via the macro tcpip_set_outputfunc(). Packet drivers do so on process startup.
Thus if there are several packet drivers in a Contiki system the one started last is the one actually used. This behaviour is especially useful for the 'IP forwarding' "meta" packet driver.
2007-05-26 23:05:36 +00:00
oliverschmidt
f0d5a14745
Moved into backyard as it was never ported to Contiki 2.x.
2007-05-26 21:28:30 +00:00
bg-
d68e4bd3df
* Add missing file.
2007-05-21 14:28:14 +00:00
bg-
2918e5ae20
SLIP for AVR on UART1
2007-02-02 13:13:16 +00:00
bg-
6257bb670b
Rename cc2420_uart0.c to cc2420_spi.c
2007-02-01 14:46:07 +00:00
bg-
a3fc32318e
* Generic AVR stuff.
2007-01-25 18:24:29 +00:00
bg-
20fa9351f2
* First port of CC2420 driver to the AVR.
2007-01-25 18:22:55 +00:00
bg-
8ebe0466a0
* Defines for 8MHz cpus.
2007-01-25 17:55:13 +00:00
bg-
6dea7b68d1
* Fill clock_delay with something (needs rewriting).
2007-01-24 16:28:51 +00:00
bg-
6bb9d0fa04
* Missing volatile.
2007-01-23 12:24:35 +00:00
barner
5d6abc4cfe
Provide dummy implementations for the leds and minileds module in order
...
to unbreak the build.
2006-12-22 17:05:31 +00:00
barner
9735acb03f
- Re-implementation of timing facility using timer0 and the internal clock
...
source. Using an external clock source (esp. the real-time clock) did not
work. This might as well be a local problem (e.g. hardware).
- Provide some dummy implementations in order to fix the build.
2006-12-22 17:04:38 +00:00
barner
6eb200cfc1
Fix build: location of eeprom.h changed.
2006-12-22 17:02:24 +00:00
barner
45cbcde797
- Fix/enhence support for RS232 interface on AVR (ATMega128):
...
* support for multiple ports: (extended interface with 'port' parameter)
* new function: rs232_redirect_stdout that allows you to redirect stdout
to a serial port
- In order to implement support for other MCUs, adopt a copy of
rs232_atmega128.h
2006-12-22 17:00:45 +00:00
barner
86f37e7c1b
AVR specific implementation of contiki multi-threating architecture
...
(supporting per-thread stacks).
2006-12-22 16:55:53 +00:00
barner
265f45feba
- Fix build of contiki-2.x AVR port.
...
- Generate symbol tables for loadable modules.
2006-12-22 16:54:36 +00:00
fros4943
93714fc39f
updated reference to "elfloader-tmp"
2006-12-18 15:17:47 +00:00
adamdunkels
8ee4f7fc3d
Removed out-commented stuff from Makefiles
2006-06-24 06:23:47 +00:00
adamdunkels
62e32d2b23
Added missing includes and made Ethernut 1 & 2 ports to compile again
2006-06-20 21:23:09 +00:00
adamdunkels
710b372a2d
AVR makefile
2006-06-18 07:44:59 +00:00
adamdunkels
c9e808d638
Import of the contiki-2.x development code from the SICS internal CVS server
2006-06-17 22:41:10 +00:00
