adamdunkels
c489b1118d
New module: packetqueue. The packetqueue module maintains packet queues for other modules.
2009-04-29 20:47:30 +00:00
nvt-se
17fa2f1618
make sure that page isolation is called after erasing a sector in reluctant GC.
...
simplified the GC logic a bit.
2009-04-29 13:15:59 +00:00
adamdunkels
cc44e89415
Reduced default strobe time, which seems to work well. Avoid running the interrupt if the power-save feature is turned off (fixes problems with serial data reception on a gateway mote)
2009-04-29 11:42:13 +00:00
adamdunkels
c02a82ac41
Tag outgoing TCP packets with the ERELIABLE attribute so that an underlying power-saving MAC protocol can treat them differently, because it knows that an ACK might be arriving soon
2009-04-29 11:40:33 +00:00
adamdunkels
92862ad2a5
Increased the number of iterations for ugly-hack-loop that checks if a transmission has started, to accommodate a faster CPU speed on the MSP430
2009-04-29 11:38:50 +00:00
adamdunkels
c9df0ab123
Bugfix in debug message printout
2009-04-28 14:01:46 +00:00
adamdunkels
81ef83b856
Added option to wait randomly before sending a packet. A few code cleanups. Avoid switching radio off when sending a packet with end-to-end acks, because an ACK may arrive shortly after the transmission.
2009-04-28 14:00:53 +00:00
adamdunkels
fdd05f5c71
Bugfix: psock send should use PT_WAIT_UNTIL() not PT_YIELD_UNTIL(). This improves TCP throughput by 100x under minimal-net
2009-04-28 13:52:04 +00:00
fros4943
7810d362a6
minor bugfixes: a rucb sender could not immediately after start receiving a bulk transfer
2009-04-16 14:32:01 +00:00
nvt-se
3f205a1413
reluctant gc will now wait until the sector has no free pages
...
before erasing the sector.
2009-04-13 22:26:31 +00:00
nvt-se
c0fb680f12
simplified code by using udp_broadcast_new.
2009-04-13 19:55:15 +00:00
nvt-se
9765df97e5
support udp_broadcast_new also when using IPv6. Suggested by Wolf-Bastian Pttner.
2009-04-13 19:54:07 +00:00
adamdunkels
ef4f5cc0e5
Made TCP MSS configurable
2009-04-10 00:37:48 +00:00
nifi
84b38de494
removed bitfields for compatibility with cc65
2009-04-09 21:54:09 +00:00
adamdunkels
f5f52ffd1f
Fixes by Ward Van Heddeghem (VUB)
2009-04-07 13:06:03 +00:00
nvt-se
03cd533712
made LISTEN_TIME and OFF_TIME configurable.
2009-04-07 11:29:08 +00:00
nifi
a3777852d4
* Corrected address for setting key 1
...
* Added missing include
2009-04-07 09:22:58 +00:00
adamdunkels
5e456aea7d
Added optimization for sending ACKs immediately. Turned optimizations on. Increased listening time to 1/64 s again due to problems with broadcasts with the 1/128 s setting
2009-04-06 22:50:35 +00:00
adamdunkels
ace6567815
Added a timer that randomizes the retransmission of an incoming new trickle version to avoid broadcast collisions
2009-04-06 21:20:35 +00:00
adamdunkels
be1c8ccec9
Added debug printouts
2009-04-06 21:19:34 +00:00
adamdunkels
d02ac74bbc
Increased size of temporary stack value to avoid overflowing when computation is done with 8-bit integers
2009-04-06 21:19:00 +00:00
adamdunkels
d298fcbbd0
Changed name of the internal struct memb_blocks to struct memb for consistency
2009-04-06 21:18:03 +00:00
nifi
000f740adc
typo
2009-04-06 15:54:07 +00:00
nifi
eab96e9b53
added rime-udp.c
2009-04-06 14:10:57 +00:00
nvt-se
d6869018c7
turned off debugging.
2009-04-06 13:27:37 +00:00
nifi
9f2ff48fda
added 802.15.4 frame packeter
2009-04-06 13:19:03 +00:00
nvt-se
3b2ad9cfc4
added packet forwarding and replaceable routing modules.
2009-04-06 13:18:50 +00:00
nvt-se
461ba4082c
in case UIP_CONF_ROUTING is set, check if we have a registered routing
...
module and use it for looking up the next hop of an address.
2009-04-06 13:18:12 +00:00
nvt-se
faf083f09d
save copy of a rime address that points to a packet buffer, since the
...
packet buffer is cleared and overwritten before the address usage is done.
2009-04-06 13:16:39 +00:00
nvt-se
c531f25c94
A module that enables Rime to run over UDP.
2009-04-06 13:13:26 +00:00
nvt-se
005578a722
added multihop routing support through replaceable modules. first implementation
...
uses rime's route discovery by translating between ipv6 and rime addresses.
2009-04-06 13:11:25 +00:00
nifi
4bc60d76d3
fixed alignment problem on MSP430 when using compression
2009-04-06 13:11:20 +00:00
adamdunkels
ed1e945e66
Added guard code so that OFF_TIME is never zero
2009-04-03 20:08:05 +00:00
adamdunkels
8dbd2b2337
Significant power consumption optimization: LPP now keeps track of encounters with neighbors and uses this information to keep the radio switched off longer.
2009-04-03 19:59:22 +00:00
adamdunkels
1d86b01bfb
Made optimizations explicit (and configurable). Added missing initialization of dutycycle protothread. Reduced default listen time and off time.
2009-04-03 11:45:06 +00:00
nvt-se
4507891ed5
made gc on removal configurable since it decreases wear levelling.
...
cleaned up some code.
2009-04-02 14:20:04 +00:00
nvt-se
1425537a13
Introduced two garbage collection mode: greedy and reluctant.
...
The greedy GC mode attempts to erase as many sectors as possible, and
it is therefore a slow operation, since the flash driver must wait
for about a second after erasing one sector. The former behavior was
to always do a greedy GC if file reservations fails due to lack of space.
The new reluctant GC stops after erasing one sector, and therefore
we often do not have to wait if there is no file system operation
in the time while the sector is being erased. We call the garbage collector
using this mode when removing a file that is not a micro log file, since
the remove function is called recursively for micro log files that are
erased because the corresponding ordinary file is erased.
This change increases the coffee test (examples/sky/test-coffee.c) speed
from 9 to 5 seconds.
2009-04-02 11:22:23 +00:00
adamdunkels
04101aae36
Fixed alignment problem on the MSP430, where the LPP header may be misaligned
2009-03-31 17:39:54 +00:00
nvt-se
e2cc8b2a3e
send all queued packet once we have the chance.
2009-03-31 14:44:13 +00:00
nvt-se
1d47e2a8da
send immediate probes only if the packet is directed to us.
...
sleep for OFF_TIME if the queue is empty.
restrict double packet lifetime timeouts to unicast packets.
stop ctimer in remove_queued_packet in case the function is not called
via the ctimer callback. it could overwrite a valid packet otherwise.
2009-03-31 14:11:25 +00:00
nvt-se
dd082f7fcf
improvements to lpp based on code from Adam and discussions with Thiemo.
...
* queue multiple packets
* send a strobe back immediately after receiving a data packet
* double the packet lifetime to allow for a missed probe
2009-03-31 12:47:00 +00:00
nvt-se
6a6bb53f2e
merged files must always inherit the old file end.
2009-03-26 15:57:52 +00:00
nvt-se
04ccf215e4
dereference gc_wait
2009-03-26 15:45:55 +00:00
nvt-se
d8caaca289
listen time and off time parameters configurable from outside because cc1020 needs longer listen time.
2009-03-26 12:50:57 +00:00
nvt-se
8785bee644
avoid repetitive garbage collection if no files have been deleted since
...
the last try.
2009-03-26 12:36:10 +00:00
fros4943
a9f0729f2c
forcing 16-bit aligned data memory
2009-03-26 12:25:05 +00:00
adamdunkels
cb4684d720
Bumped version number to 2.2.3
2009-03-24 14:09:22 +00:00
adamdunkels
73fdf05940
Added const to constant parameters (rime addresses)
2009-03-24 07:15:04 +00:00
adamdunkels
a625d80259
Added explicit typecast to buffer definition
2009-03-24 07:14:12 +00:00
adamdunkels
ec1677ca6c
Added a function (quick hack) that sets the radio transmission power of outgoing announcement packets in xmac
2009-03-23 21:06:26 +00:00
adamdunkels
1cbc0f4ea9
Send announcement packets only if there are any announcements to send
2009-03-23 21:00:25 +00:00
adamdunkels
f4b8680174
Defined the packetbuf buffer so that it is always aligned on a 16-bit boundary.
2009-03-23 19:37:45 +00:00
adamdunkels
39af9b361d
Fixed minor bug in comment
2009-03-23 16:39:09 +00:00
adamdunkels
21e0900d18
Made constant addresses const
2009-03-23 16:22:02 +00:00
adamdunkels
143bf11548
The multihop module used the pre-chameleon style packet headers. Converted it to use packet attributes instead of packet headers
2009-03-23 16:20:37 +00:00
adamdunkels
c791d851bb
Send an announcement packet only if there are more than zero announcemnets
2009-03-23 16:19:03 +00:00
nifi
91fa18e0e6
removed unused prototype
2009-03-23 10:58:00 +00:00
nvt-se
cc85a36722
use u8 when writing rime addresses.
2009-03-21 20:53:06 +00:00
nvt-se
bffbb06d4a
corrected GC page isolation loop.
...
adjusted cfs_coffee_reserve signature to use cfs_offset_t instead of uint32_t.
made cfs_coffee_format also to clear *next_free.
2009-03-20 15:15:43 +00:00
nvt-se
b7bdfe8daf
bugfixes:
...
* set invalid page on all removed files which have cache entries.
* update file cache entries earlier to prevent overwrites.
2009-03-19 20:44:43 +00:00
nvt-se
4b6c110706
fixed documentation typos.
2009-03-17 20:28:44 +00:00
adamdunkels
0076bfe8a5
Changed the name of the 'serial' module to 'serial-line' to signify that the module is about lines of data from the serial port, not individual bytes, and to make sdcc happy
2009-03-17 15:56:32 +00:00
nifi
f0e56df2eb
fixed compiler warning when timesynch is disabled
2009-03-17 09:57:01 +00:00
nvt-se
13b364bcc1
fixed documentation typos.
2009-03-15 20:29:04 +00:00
nvt-se
41ca9516a7
fixed documentation typos.
2009-03-15 20:21:16 +00:00
adamdunkels
fb8fab739a
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 23:04:52 +00:00
adamdunkels
65eb5fd4e8
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 21:58:20 +00:00
adamdunkels
f634ccfb3d
Set transmission power based on packet attribute
2009-03-11 20:38:53 +00:00
adamdunkels
537219bf27
Added a packet attribute to specify transmission power on outgoing packets
2009-03-11 20:33:17 +00:00
zhitao
f304941ab4
raise busy forwarding flag before sending
2009-03-10 14:07:41 +00:00
julienabeille
2a173b465a
more printing in debug mode
2009-03-10 08:00:59 +00:00
zhitao
1eb085834f
Update announcement value after route metric saturates. Not doing this results in stubborn forwards from former children nodes.
2009-03-09 12:54:27 +00:00
adamdunkels
a1260c0c1f
Documentation updates
2009-03-08 21:43:24 +00:00
adamdunkels
366ad7bece
Added Rime documentation from the Rime/Chameleon paper (SenSys 2007)
2009-03-07 11:15:46 +00:00
zhitao
0a12098bd5
avoid ping pong packets during route disruption
2009-03-06 17:33:59 +00:00
adamdunkels
dc7491f810
Bugfix and optimization: X-MAC did not properly switch the radio off after sending a packet, resulting in increased power consumption. For packets that require an ACK, we can let the radio be on in anticipation of the ACK (controlled with an WITH_ACK_OPTIMIZATION option)
2009-03-05 19:37:52 +00:00
zhitao
64badeb282
bugfix: use memcpy() to get attributes longer than a byte properly written to packet header
2009-03-05 13:51:28 +00:00
zhitao
08b2315f41
bugfix: put up busy forwarding flag only after next hop found
2009-03-04 08:59:32 +00:00
fros4943
f701615afa
bugfix: remember active transmissions (sender side) instead of last received packets (receiving side). allows several nodes sending to a single receiver.
...
+ added function for checking if runicast is currently transmitting (non-acked) data
2009-03-03 12:19:46 +00:00
adamdunkels
9816f49fe6
Changed listen and transmit energy attributes so that they are named _TIME rather than _ENERGY, to indicate that they contain the time during which the radio was switched on and not the energy
2009-03-02 22:00:41 +00:00
adamdunkels
57b9cab27e
Set RSSI, correlation, and timestamp as packet attributes for incoming packets
2009-03-02 21:59:01 +00:00
adamdunkels
78591a003f
Minor documentation update
2009-03-02 21:56:16 +00:00
adamdunkels
45e32894a0
Bugfix: backwards definition of MIN macro (quite embarassing)
2009-03-02 11:22:09 +00:00
adamdunkels
d813d343c5
Cleaned up old left-over code
2009-03-01 20:38:57 +00:00
adamdunkels
7010eb84b8
Added support for communication power accounting. Energy is attributed to idle listening when the radio is switched off. Enegrgy is attributed to an incoming packet when it is received. Energy is attributed to an outgoing packet when it is transmitted.
2009-03-01 20:37:16 +00:00
adamdunkels
94c2c0ce85
Communication power accounting: this module keeps track of the energy expenditure of individial communication activities, such as transmission or reception of individual packets or idle listening.
2009-03-01 20:32:03 +00:00
adamdunkels
b8860727ac
A ring buffer library. The ring buffer library is useful in device drivers, where bytes can be safely written to the buffer from an interrupt handler, and read from non-interrupt code.
2009-03-01 20:23:56 +00:00
oliverschmidt
545c0c506e
Switched cfs offset type to signed int to allow backward movements with cfs_seek.
2009-03-01 12:28:39 +00:00
nvt-se
47d70f2ae3
Switched name to CFS_CONF_OFFSET_TYPE to emphasize that it is a configurable option.
2009-03-01 12:00:00 +00:00
adamdunkels
aa2f7a3399
Made polite announcement times configurable, added missing right-brace
2009-03-01 10:43:57 +00:00
adamdunkels
3adf8e5807
Call output packet sniffers after the MAC has sent the packet
2009-03-01 10:29:50 +00:00
adamdunkels
e78fd82f7d
Documentation bugfix: rtimer should be in sys group and the stimer library should have the correct documetation group
2009-03-01 09:31:43 +00:00
nvt-se
63b89a67fe
* cfs_opendir in Coffee now accepts any name.
...
* refer to the documentation of each whence parameter. Old documentation didn't consider negative movements either.
2009-02-28 13:40:25 +00:00
oliverschmidt
bc3d9d2e3c
Minor rearrangement.
2009-02-28 11:57:46 +00:00
oliverschmidt
938f151a66
Allow to override the whence macros individually - just like the open flags.
2009-02-28 11:39:02 +00:00
oliverschmidt
a7cb609321
With dynamic loading enabled the function ctk_textentry_input_null() lives in the persistent core while the macro CTK_TEXTENTRY() is typically used in loadable modules. So ctk_textentry_input_null() needs to be dynamically resolved.
...
On Win32 dynamic resolving isn't done by patching the dynamically loaded segments. Rather the code generated by the compiler for accessing symbols declared with __declspec(dllimport) is implicitly modified to actually go through pointer dereferenciations. The dynamic linker only initializes this pointers.
But with the symbol ctk_textentry_input_null becoming a pointer to a function it isn't a constant anymore and so it can't be used as initializer element - and thus breaking CTK_TEXTENTRY().
So the only viable solution seems to stick to the inversally available NULL pointer on Win32. But if there's an ugly #ifdef <platform> necessary anyway than it seems resonable to classify ctk_textentry_input_null as the special case and therefore use #ifdef SDCC:
- It saves some bytes on all non-SDCC platforms
- Is matches the exsisting inline documentation
2009-02-28 10:43:30 +00:00
nvt-se
aaa9d62304
fixed cfs_seek signature.
2009-02-27 14:52:52 +00:00
nvt-se
6615e39e27
switched unsigned int to cfs_offset_t
2009-02-27 14:50:35 +00:00
oliverschmidt
1d820bae87
Avoid compiler warning by returning a value from non-void function but no not avoid calling into the function now returning a meaningful value.
2009-02-27 14:42:49 +00:00
nvt-se
90e8016906
file end check must be against fdp->offset.
2009-02-27 14:35:12 +00:00
nvt-se
a0226e2418
switched all users of cfs_seek(x,y) to cfs_seek(x,y,CFS_SEEK_SET)
2009-02-27 14:28:02 +00:00
nvt-se
3191a2568c
Major API change:
...
1. Introduced a cfs_offset_t type that designates file offsets. unsigned int
was insufficient on several platforms with non-volatile storage that exceed
the capacity of unsigned int.
2. Switched cfs_seek signature to POSIX style with a "whence" parameter.
2009-02-27 14:25:37 +00:00
nvt-se
5e038640e2
fixed error in last commit: second character must terminate
2009-02-27 13:21:59 +00:00
nvt-se
a258be684f
permit the current directory name "." to be used in cfs_opendir.
2009-02-27 13:19:04 +00:00
nvt-se
2295df7246
The text suggested that only append operations were supported.
2009-02-27 10:54:08 +00:00
oliverschmidt
d816b712c3
Minimal reformatting only.
2009-02-27 08:18:54 +00:00
nvt-se
2e12c2408e
bug fix: removed possible null pointer dereference.
2009-02-25 23:59:26 +00:00
nifi
dee785ae88
added configuration of checksum and timesynch
2009-02-25 21:21:06 +00:00
adamdunkels
54fd65be5b
Added check for NULL textentry input, and a typecast to make cc65 happy
2009-02-25 10:34:47 +00:00
adamdunkels
45387fea3f
Removed leftover semicolon
2009-02-25 09:13:51 +00:00
adamdunkels
669bf3743e
Fixed function prototype so that it compiles again...
2009-02-25 09:01:38 +00:00
julienabeille
f95c5df7d9
The global prefixes processed must be one less than the total amount of prefixes, as the link local one occupies one slot
2009-02-25 08:35:52 +00:00
adamdunkels
e34e97cd6f
Minor code style fixes
2009-02-24 21:30:20 +00:00
adamdunkels
0ded8897e6
Added a dummy function instead of a NULL callback in the textentry widget because sdcc does not like NULL function pointers
2009-02-24 21:30:02 +00:00
nvt-se
bc7c90bb9f
doubled the speed of uncached file openings.
2009-02-22 15:19:31 +00:00
adamdunkels
bdc488c7f3
Removed PROCESS_ZOMBIE code, which does not compile with sdcc, added some optional debugging printouts
2009-02-20 21:24:17 +00:00
adamdunkels
2aedc8490d
Compile only if timesynch is enabled
2009-02-20 21:23:22 +00:00
adamdunkels
e6907a1d8b
Include random.h
2009-02-20 21:22:39 +00:00
adamdunkels
4ec5167276
Rewrote the tcpip_output() and tcpip_set_outputfunc() so that the latter is a proper function (which simplifies debugging) and so that tcpip_output() checks if the output callback function is NULL before calling it
2009-02-20 21:21:56 +00:00
julienabeille
10deaa6fc6
Removed CLOCK_SECOND from stimers in uIPv6, stimers are already in seconds
2009-02-20 07:59:35 +00:00
nvt-se
957ae56b13
broke out the essence of the search algorithm to a separate function.
2009-02-19 21:35:38 +00:00
julienabeille
710e5c621c
changed timer to stimer for neighbor, prefix, default router, address list
2009-02-19 16:42:41 +00:00
nvt-se
07c50cc200
corrected file cache status checks in previous commit.
2009-02-17 18:50:29 +00:00
nvt-se
d029dd8240
cleaned up mostly the GC code.
...
made EOF hints optional.
default build is now ~500 bytes smaller.
2009-02-17 16:56:32 +00:00
fros4943
97f76126e6
remembering last received packet id to avoid multiple recv callbacks for the same retransmitted packet (but still sending back acks of course)
2009-02-17 12:40:18 +00:00
c_oflynn
8516626703
Fixed documentation error (thanks to David Kopf)
2009-02-17 01:28:28 +00:00
adamdunkels
36bb3ece64
If no neighbor is found, we listen for announcements. Cleaned up debug output.
2009-02-16 01:18:53 +00:00
adamdunkels
aaa8c9d2c9
Construct the X-MAC header on the stack instead of directly in the packet header, because the packet header may be misaligned. A bit of cleanup in the code too.
2009-02-15 22:05:06 +00:00
adamdunkels
e4b1ff461e
Added MAC-layer announcement beacons to X-MAC. Configuratble through XMAC_CONF_ANNOUNCEMENTS
2009-02-14 20:35:03 +00:00
nvt-se
883d10e136
GC fix: isolated pages must always be allocated.
...
page allocation: increased utilization because the algorithm failed to
count all space before.
style: renamed and simplified some code and names.
2009-02-14 19:09:17 +00:00
nvt-se
b8f3dca765
fixed merge_log bug and space allocation error with isolated pages.
2009-02-12 11:24:22 +00:00
adamdunkels
13a3029435
Rewrote the random_rand() pseudo random number generator to use the libc rand() function instead
2009-02-11 11:09:59 +00:00
adamdunkels
585620c102
Reverted the recent change from random_rand() to rand(). It turned out that
...
since libc rand() returns a signed int, there were frequently problems with
timer values wrapping. By reverting to random_rand(), we can provide a
random generator that returns an unsigned and the timer problems are solved.
2009-02-11 11:08:53 +00:00
adamdunkels
9d75781a78
Added packet attributes for energy spent on a packet (RIMEBUF_ATTR_LISTEN_ENERGY and RIMEBUF_ATTR_TRANSMIT_ENERGY)
2009-02-10 23:51:12 +00:00
adamdunkels
b15198b9a8
Bugfix: the Chameleon header parser modules should not clear the packet attributes, because the MAC or radio layers may have added attributes already
2009-02-10 23:49:58 +00:00
adamdunkels
e1ef13dad6
Reduced the size of the packet cache from four to two to avoid falseley dismissing fresh packets (the header field that hold sequence numbers is only two bits wide, hence all sequence numbers fits in a four-entry cache...)
2009-02-10 00:44:50 +00:00
adamdunkels
6c95bd895a
Added default initialization of polite announcements. Not sure where the best place for this is, but this at least allow us to start experimenting with this.
2009-02-09 22:05:33 +00:00
adamdunkels
3efb83c338
Added announcement includes
2009-02-09 21:09:42 +00:00
adamdunkels
0de445e035
Initialize the announcement module
2009-02-09 21:08:12 +00:00
adamdunkels
3670ef2f44
Rewrote the collect module so that it uses the announcement module rather than the neighbor-discovery module. This makes it possible to implement other annoumcement back-ends than the traditional broadcast-based neighbor discovery
2009-02-09 20:58:25 +00:00
nvt-se
98f7f9a06a
sizeof on coffee_fd_set is no longer suitable since it has become a
...
pointer.
2009-02-09 12:02:10 +00:00
fros4943
4f7f3c97b5
* added coffee_files to the protected memory needed during cfs-based checkpointing operations
...
* renamed cfs_coffee_get_fd_set() to cfs_coffee_get_protected_memory() to highlight that not only fd_set is protected
2009-02-09 10:08:26 +00:00
adamdunkels
dd9ffd87c4
Added missing #include announcement.h
2009-02-08 20:14:18 +00:00
adamdunkels
085df6b630
Improved version of LPP with support for broadcasts as well as announcement data in the probes
2009-02-08 19:30:18 +00:00
nvt-se
d0a546b049
A long refactoring session yielded the following.
...
Technical changes:
* Factored out file specific information from the file descriptor
structure into a new file structure.
- Useful file metadata can be stored after the file is closed.
- File descriptors become much smaller.
- Significantly reduces the need to scan for the file end.
* Use correct types in all function signatures.
* Removed the directory cache.
Results:
* Enormous speed increase when opening cached files (10x-20x.)
* Multiple fd:s pointing to the same file have the correct semantics.
* About 100 bytes smaller ROM size.
* Slightly smaller static RAM size.
2009-02-08 17:08:13 +00:00
adamdunkels
91d280c4c9
Reverted to the old behaviour on broadcasts: send strobes for both unicast and broadcast packets.
2009-02-07 18:45:50 +00:00
adamdunkels
4b71003c2f
Changed from random_rand() to rand() for better pseudo randomness
2009-02-07 18:43:45 +00:00
adamdunkels
752291f450
Changed from random_rand() to rand() function for (pseudo) random numbers because random_rand() does not work that well
2009-02-07 16:16:31 +00:00
adamdunkels
91e8487032
Added Doxygen documentation
2009-02-07 16:15:37 +00:00
adamdunkels
be846d8c90
A new experimental network primitive called an 'announcement'. An
...
announcement is an (ID, value) tuple that is disseminated to local
area neighbors. An application or protocol can explicitly listen to
announcements from neighbors. When an announcement is heard, a
callback is invoked.
Announcements can be used for a variety of network mechanisms such as
neighbor discovery, node-level service discovery, or routing metric
dissemination.
Application programs and protocols register announcements with the
announcement module. An announcement back-end, implemented by the
system, takes care of sending out announcements over the radio, as
well as collecting announcements heard from neighbors.
2009-02-05 19:32:01 +00:00