Commit Graph

1315 Commits

Author SHA1 Message Date
Oliver Schmidt
5f6a672e23 Merge pull request #1184 from oliverschmidt/master
Adjusted retro target clock to "new" DNS resolver.
2015-08-04 15:39:18 +02:00
Oliver Schmidt
ca2552461e Adjusted retro target clock to "new" DNS resolver.
The DNS resolver requires 1/4 sec clock resolution. The retro targets had a 1/2 sec clock resolution (optimized for the 1/2 sec TCP timer) resulting in DNS resolver timeouts being 0. Therefore the retro target clock resolution is now increased to 1/4 sec.
2015-08-04 13:48:08 +02:00
George Oikonomou
195ada6668 Merge pull request #1107 from phoenix-frozen/cc2530-rf-const-warning
fix minor warning in cc2530-rf driver
2015-08-03 10:28:43 +01:00
Billy Kozak
35919f6836 CC26xx - Enable RX_NOK on DEBUG builds
Enabled the RX_NOK interrupt, if DEBUG or CC26XX_DEBUG_CRC are set
true, for the purpose of monitoring packets with bad CRC
2015-07-20 10:47:06 -06:00
Billy Kozak
99d74e949f CC26xx autoflush bad crc packets
Setting bAutoFlushCrc=1 so that the radio co-processor will
automatically drop packets with bad crc.
2015-07-16 08:58:24 -06:00
Oliver Schmidt
ca50a2c6df Merge pull request #1157 from oliverschmidt/master
Allow fixup to be repeated.
2015-07-09 23:31:00 +02:00
Oliver Schmidt
f348f4feb2 Allow fixup to be repeated.
There are scenarios in which it is beneficial to search for an Etherne chip at several i/o locations. To do so the chip initialization is performed at several i/o locations until it succeeds. In order to allow for that operation model the i/o location fixup needs to be repeatable.

Note: This won't work with the RR-Net because the fixup bits overlap with the chip i/o bits.
2015-07-09 22:43:16 +02:00
Billy Kozak
b7565f3930 turned on correlator in radio packet filter
Enabling this option seems to greatly improve transciever performance with
Contikimac. This seems to happen because Contikimac CCAs are much less likely
to detect false positives (thus screwing up the CCA sequence).
2015-07-06 16:28:40 -06:00
Antonio Lignan
8cc0a12a9f Merge pull request #1097 from bthebaudeau/cc2538-examples-fix-warnings
cc2538: examples: Fix build warnings
2015-06-24 11:39:24 +02:00
Oliver Schmidt
08be27b602 Merge pull request #1139 from oliverschmidt/master
Several minor retrocomputing configuration changes.
2015-06-22 07:59:25 +02:00
Oliver Schmidt
fc9d38caba Reduced default for number of connections.
Save some memory by reducing the the default for number of connections from 10 to 2.
2015-06-21 20:58:51 +02:00
Oliver Schmidt
ac3b8b0955 Merge pull request #1138 from oliverschmidt/master
Fix DHCP client retries.
2015-06-21 17:42:49 +02:00
Oliver Schmidt
8c346dd762 Removed (dysfunctional) dependency generation from cc65 .co file rule.
The default gcc .co file rule doesn't support dependency generation too.
2015-06-21 16:39:12 +02:00
Oliver Schmidt
b8bece508a Fix DHCP client retries.
In order to have DHCP retries actually work dhcpc_appcall() must be called for PROCESS_EVENT_TIMER too.
2015-06-21 14:25:52 +02:00
George Oikonomou
b4ec0c7c1d Remove doxygen explicit links to non-existing symbols
Parts of the stm32w108 doxygen comments have explicit links to symbols that do not exist anywhere in our source base, let alone be documented. This is likely to be caused by a partial import of manufacturer libraries in the Contiki source tree.

These links were previously not generating warnings in the doxygen log because we were not defining `DOXYGEN_SHOULD_SKIP_THIS` and they were thus being skipped altogether by the doxygen pre-processor. Defining `DOXYGEN_SHOULD_SKIP_THIS` causes those doxygen comments to get processed and to thus generate warnings.

This commit removes explicit links to non-existent symbols and updates `doxyerrors.cnt` accordingly.
2015-06-20 16:10:25 +01:00
Benoît Thébaudeau
2eef189a0a doxygen: Fix some warnings
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-20 03:22:31 +02:00
Benoît Thébaudeau
0b1a0d2bd9 Merge pull request #1092 from g-oikonomou/contrib/remote_watchdog_stop
Remove CC2530 and CC2538 dummy watchdog_stop()
2015-06-18 21:56:13 +02:00
Oliver Schmidt
c9edb9006b Merge pull request #1112 from oliverschmidt/master
Various improvements of the HTTP client and web browser.
2015-06-14 16:12:24 +02:00
Justin King-Lacroix
f968e53250 fixed minor warning in cc2530-rf driver 2015-06-10 18:20:04 +01:00
Benoît Thébaudeau
0f137e4bdd cc2538: uart: Make uart_isr() static
This function is only supposed to be used by uart.c, so it should be
static.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-05 21:50:49 +02:00
Benoît Thébaudeau
e8a268cd15 cc2538: aes: Add support for 192- and 256-bit keys
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:56 +02:00
Benoît Thébaudeau
801315e819 cc2538: aes: Make it possible to have several keys stored at once
Several keys can be kept at the same time in the key store, and several
keys can be loaded at once. Give access to these features.

The ccm-test example is also improved to better demonstrate the use of
the key store.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:07 +02:00
Benoît Thébaudeau
b92a5afcc4 cc2538: ccm: Make it possible to use the interrupt
Using the AES interrupt allows the user process not to waste time
polling for the completion of the operation. This time can be used by
the user process to do something else, or to let the system enter PM0.

Since the system is now free to perform various operations during a
crypto operation, a protection of the crypto resource is added, and PM1+
is prohibited in order not to stall crypto operations.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:07 +02:00
Benoît Thébaudeau
117dc4e5e3 cc2538: Add crypto drivers and examples for AES-CCM and SHA-256
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:06 +02:00
Benoît Thébaudeau
66acf74612 cc2538: examples: Fix build warnings
Toolchain used:
arm-none-eabi-gcc (GNU Tools for ARM Embedded Processors) 4.9.3 20150303
(release) [ARM/embedded-4_9-branch revision 221220]

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 01:38:11 +02:00
George Oikonomou
d28eb023ef Remove CC2530 and CC2538 dummy watchdog_stop()
The CC2538 the WDT cannot be stopped once it has been started.
The CC2530/1 WDT can be stopped if it is running in timer mode,
but it cannot be stopped once it has been started in watchdog mode.

Both platforms currently provide "dummy" implementations of `watchdog_stop()`,
one does nothing and the other one basically re-maps `_stop()` to
`_periodic()`.

This was originally done in order to provide implementations for all prototypes
declared in `core/dev/watchdog.h`. In hindsight and as per the discussion
in #1088, this is bad practice since, if the build succeeds, the caller will
expect that the WDT has in fact been stopped, when in reality it has not.

Since the feature (stopping the WDT) is unsupported by the hardware, this pull
removes those dummy implementations. Thus, we will now be able to reliably
detect - at build time - attempts at using this unsupported feature.
2015-06-01 15:24:14 +01:00
Oliver Schmidt
4a6909d16a Remove RDC config from retro definitiions.
After the modularization of the Contiki libraries this isn't necessary anymore.
2015-05-25 13:43:11 +02:00
Benoît Thébaudeau
1cd3c9e7e5 cc2538: Initialize .data/.bss using ROM functions
This is safer because the previous code assumed that the start and end
VMAs of .data and .bss were word-aligned, which is not always the case,
so the initialization code could write data outside these sections. The
ROM functions support any address boundary.

This is faster because the ROM functions are ultra optimized, using
realignment and the LDM/STM instructions, which is much better than the
previous simple loops of single word accesses.

This is smaller because the ROM functions don't require to add any code
to the target device other than simple function calls.

This makes the code simpler and more maintainable because standard
functions are not reimplemented and no assembly is used.

Note that this is also faster and smaller than the corresponding
functions from the standard string library.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-05-23 18:50:52 +02:00
Benoît Thébaudeau
609c615303 cc2538: Move the stack out of .bss
The initialization code clearing .bss is allowed to use the stack, so
the stack can not be in .bss, or this code will badly fail if it uses
the stack.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-05-23 18:50:52 +02:00
Benoît Thébaudeau
0de729572b cc2538: Word-align .data LMA
In order to be fast, the reset_handler() function uses word accesses to
initialize the .data output section. However, most toolchains do not
automatically force the alignment of an output section LMA to use the
maximum alignment of all its input sections. Because of that, assuming
that .data contains some words, the LMA of the .data output section was
not word-aligned in some cases, resulting in an initialization performed
using slow unaligned word accesses.

This commit forces the alignment of the LMA of the .data output section
with a word boundary in order to always use fast aligned word accesses
to read the .data load area.

Note that this solution is better than using ALIGN_WITH_INPUT, both
because the latter is a new feature incompatible with older toolchains,
and because it could create a big gap between _etext and the LMA of
.data if strongly-aligned data were added to .data, although only a word
alignment is required here.

The same considerations apply to the VMA of .data. However, it is
already automatically word-aligned, both because .data contains words,
and because the end VMA of the previous output section (.socdata) is
word-aligned. Moreover, if the VMA of .data were forcibly word-aligned,
then a filled gap could appear at the beginning of this section if
strongly-aligned data were added to it, thus wasting flash memory.
Consequently, it's better not to change anything for the VMA of .data,
all the more it's very unlikely that it does not contain any word and
that the end VMA of .socdata becomes non-word-aligned, and this would
only result in a slower initialization.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-05-23 18:12:54 +02:00
Benoît Thébaudeau
0d260f61a0 cc2538: Fix .data LMA/VMA mismatch with some toolchains
Some toolchains, like Sourcery CodeBench Lite 2013.05-23 arm-none-eabi
(http://sourcery.mentor.com/public/gnu_toolchain/arm-none-eabi/)
automatically force the alignment of an output section LMA to use the
maximum alignment of all its input sections. This toolchain uses GNU
binutils 2.23, and this automatic behavior is the same as the manual
behavior of the ALIGN_WITH_INPUT feature of GNU binutils 2.24+.

This behavior is not an issue per se, but it creates a gap between
_etext and the LMA of the .data output section if _etext does not have
the same alignment, while reset_handler() initialized this section by
copying the data from _etext to its VMA, hence an offset in the
addresses of loaded data, and missing data.

This commit fixes this issue by making reset_handler() directly use the
LMA of the .data section using LOADADDR(.data), rather than assuming
that _etext is this LMA.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-05-23 18:12:53 +02:00
Antonio Lignan
2cee62eb33 Merge pull request #1074 from g-oikonomou/cc26xx/contrib/new-cc26xxware
Update to latest CC26xxware and add it as a submodule
2015-05-21 10:01:00 +02:00
Ulf Knoblich
d8efa8428c cc2538: Allow for configuration of processor speed 2015-05-19 18:55:55 +02:00
Adam Dunkels
730bda2001 Merge pull request #883 from cmorty/pull/global-macros
Move MAX, MIN and ABS to contiki-macros
2015-05-18 21:33:00 +02:00
Ulf Knoblich
a388a1bcd7 CC2538: added support for SSI1 2015-05-18 10:02:55 +02:00
Moritz 'Morty' Strübe
0dab6926b3 Move MAX, MIN and ABS to sys/cc.h 2015-05-18 08:53:17 +02:00
George Oikonomou
5d20e76346 Adjust the build system to use CC26xxware as a sub-module 2015-05-17 15:01:01 +01:00
George Oikonomou
40e82395c4 Pull CC26xxware as a submodule 2015-05-17 15:01:01 +01:00
George Oikonomou
b4067560ba Remove references to obsolete peripheral clock scaling functions 2015-05-17 15:01:01 +01:00
George Oikonomou
ab4249a709 Adjust retention calls
* Rename VIMS-related calls
* Remove obsolete ones
2015-05-17 15:01:01 +01:00
George Oikonomou
b38d32b281 Rename AON WUC power status macros 2015-05-17 15:01:01 +01:00
George Oikonomou
8673bbdd55 Update linker script to accommodate for larger CCFG size 2015-05-17 15:01:00 +01:00
George Oikonomou
09a8c54eb1 Update CC26xxware glue macros
* Remove references to removed functions
* Add macros to new functions
* Rename macros to renamed functions
* Add macros for the HAPI
2015-05-17 14:09:52 +01:00
George Oikonomou
5f4154a0e3 Adjust AON BatMon usage 2015-05-17 14:09:51 +01:00
Benoît Thébaudeau
25532e8abf Merge pull request #754 from wwhuang/master
[CC2538] Fix SPI_FLUSH
2015-05-16 20:55:30 +02:00
Antonio Lignan
e8b1a57ac6 Merge pull request #809 from cmorty/pull/msp430_gstabs
[MSP430] Add gstabs debug information (dwarf is broken)
2015-05-16 11:01:47 +02:00
Antonio Lignan
32afadea77 Merge pull request #1047 from g-oikonomou/cc26xx/contrib/lpm
CC26xx Ultra Low Power Operation
2015-05-16 10:27:22 +02:00
George Oikonomou
1cf37e0c1a Tidy-up code style 2015-05-15 23:36:54 +01:00
George Oikonomou
78d04f812b Fix typo in macro 2015-05-15 09:21:05 +01:00
George Oikonomou
07272b7cd6 Improve UART power-cycling logic:
* Only enable TX by default.
* Add some magic for RX handling. When an input handler is registered:
  * Automatically enable RX-related and interrupts
  * Automatically lock the SERIAL PD on under all power modes
  * Automatically enable the UART clock under sleep and deep sleep
  * Automatically undo all of the above when the input handler becomes NULL
  * As a result, modules / examples that need UART RX no longer need to clock the UART and manipulate the SERIAL PD. They simply have to specify an input handler
* Don't automatically power on the UART whenever the CM3 is active
* Before accessing the UART, make sure it is powered and clocked
* Avoid falling edge glitches
* Fix garbage characters / Explicitly wait for UART TX to complete
2015-05-15 09:21:04 +01:00