Gaëtan Harter
60719b8239
Remove unused SICSLOWPAN_CONF_CONVENTIONAL_MAC
2015-03-24 11:18:25 +01:00
Simon Duquennoy
c2ca3e9fdb
Cleanup UIP_CONF_IPV6_RPL configuration
2014-12-02 12:38:55 +01:00
Simon Duquennoy
a9cc909794
Network layer configuration: replace UIP_CONF_* with NETSTACK_CONF_WITH_*
2014-12-01 21:02:57 +01:00
Simon Duquennoy
722b3258d1
Cleanup of the Contiki network layer configuration. Now using CONTIKI_WITH_IPV6, CONTIKI_WITH_IPV4, and CONTIKI_WITH_RIME in makefiles, and UIP_CONF_IPV6, UIP_CONF_IPV4, UIP_CONF_RIME in c code. Now only the stacks that are used are compiled (via makefile MODULES). Make IPv6 the default network stack.
2014-12-01 20:13:09 +01:00
kkrentz
7b63217a32
ContikiMAC: Default to contikimac_framer when using Rime over ContikiMAC
2014-11-25 04:56:09 -08:00
kkrentz
2cf7d98cad
ContikiMAC: Create and parse ContikiMAC header in special framer; Expanded framer interface
...
to allow for creating and securing frames in advance; Create and secure frames in advance when sending bursts; Do neither recreate nor resecure frames that come from phase
2014-08-05 05:07:06 -07:00
Adam Dunkels
45265249fc
Changed the name of the rimeaddr module to linkaddr
2014-01-29 20:12:24 +01:00
Moritz 'Morty' Strübe
c67c048cac
Clean up setting channel and CCA-threshold for CC2420 based motes.
...
The CCA-threshold now defaults to -46 which give better simulation
results and typically also better experimental results.
This adjustment is also needed due to commit 0a13f99 in mspsim. As
promised in https://github.com/mspsim/mspsim/pull/18 it broke the
regression tests.
2013-11-07 17:28:33 +01:00
Simon Duquennoy
248301a041
Fix naming issues and includes in uip-ds6-nbr.h
2013-08-19 17:48:30 +02:00
Simon Duquennoy
ff093a2b50
Removed now unused per-module neighbor table size configs. Use NEIGHBOR_CONF_MAX_NEIGHBORS instead.
2013-08-19 17:48:30 +02:00
Adam Dunkels
277a348f60
Changed the name of the IPv6 number of route entries configuration from UIP_CONF_DS6_ROUTE_NBU to UIP_CONF_MAX_ROUTES.
2013-03-18 11:12:44 +01:00
Adam Dunkels
25c28e06cc
Removed the obsolete MAC_CONF_CHANNEL_CHECK_RATE (now replaced with NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE)
2011-09-05 20:42:12 +02:00
Adam Dunkels
a06cf93e4c
Made the sky and z1 platform handling of PROJECT_CONF_H the same as the other platforms: the makefile should define PROJECT_CONF_H to be the name of the header file to include. This header file should #undef everything it #defines, as it is included after all the other configuration options in contiki-conf.h
2011-09-05 11:46:15 +02:00
Adam Dunkels
ee75ec3ced
Be a little more conservative in terms of what headers not to compress
2011-09-05 11:41:41 +02:00
Adam Dunkels
6c607b702a
Use the SICSLOWPAN_CONF_COMPRESSION_THRESHOLD to avoid compressing IPv6 packets smaller than 60 bytes. This allows us to use ContikiMAC without its header, making it 802.15.4 compliant again.
2011-09-02 13:52:19 +02:00
Adam Dunkels
aedf4fe8b5
Made ContikiMAC/8 default on z1 platform; enabled power profiling by default
2011-07-29 13:05:36 +02:00
Joakim Eriksson
77ec0bfa0f
fixed the z1 platform and generic code used by z1 to work with IAR compiler
2011-05-25 17:21:51 +02:00
Enric M. Calvo
1716d837fc
Merge branch 'master' of git://contiki.git.sourceforge.net/gitroot/contiki/contiki into master_cleanup
...
Makefile.z1 is broken into .common and .z1 to share it with Z1 Starter Platform
Conflicts:
.gitignore
platform/z1/Makefile.z1
2011-03-25 17:46:38 +01:00
Enric M. Calvo
0c6fd04f44
Modified contiki-conf.h and added sensys-scanner.
2011-03-03 13:44:28 +01:00
Enric M. Calvo
02d097674c
Corrected contiki-conf.h to include project-conf.h
2011-02-27 20:00:45 +01:00
Enric M. Calvo
18e1f92f0e
Set QUEUEBUF_CONF_NUM to 4 to avoid .data overflow
2011-02-27 17:52:00 +01:00
Enric M. Calvo
404b735cc4
Fixed radio and contiki conf to get RIME working
...
cc2420 isr handled at cc2420-arch, disabled accel. interrupts and modified
platform/z1/contiki-conf.h to use same mac as sky.
Added example-broadcast-button, sends packets every second or when button pushed.
Works with other Z1s and Sky
2011-02-27 12:35:19 +01:00
adamdunkels
353bb07cc9
Changed the RDC rate configuration name to the new configuration name
2010-11-26 12:09:04 +00:00
joxe
645c48a332
added Z1 platform
2010-08-24 16:26:38 +00:00