Commit Graph

818 Commits

Author SHA1 Message Date
adamdunkels
b43f7830b3 Fine-tuned the timing and phase lock optimization 2010-03-31 20:27:15 +00:00
adamdunkels
4e33112d3e Guard against malformed broadcast announcements 2010-03-31 12:17:24 +00:00
adamdunkels
877eb2fbe9 Fiddled with the timing 2010-03-31 11:54:38 +00:00
fros4943
3bd07ea55a bugfix: refresh correct source route
+
refreshing gateway route whenever data is received via a gateway
2010-03-31 09:38:42 +00:00
adamdunkels
bcfa80102d Had previously not included the waiting time that the CC2420 introduces when sending a packet. Also increased the smallest packet size, just to be on the safe side. 2010-03-30 23:01:32 +00:00
adamdunkels
226abb8ec3 Removed non-existant include file 2010-03-29 22:10:03 +00:00
adamdunkels
4e3268e2e2 Added function that removes the header 2010-03-29 21:53:04 +00:00
adamdunkels
4c3b69dc07 Configuration parameter for number of MAC-layer retransmissions 2010-03-29 21:52:25 +00:00
adamdunkels
9c58768b59 Extend packet size after creating 802.15.4 header; prepare radio chip with packet before waiting for neighbor phase to make phase wait time deterministic 2010-03-29 21:51:36 +00:00
adamdunkels
b4b7e942b6 Back off a guard time for every non-ack packet 2010-03-29 21:50:01 +00:00
oliverschmidt
315e446584 Adjusted formal parameter to single existing actual parameter. 2010-03-29 20:26:14 +00:00
fros4943
0fcbfae836 updated function: has_value argument was missing 2010-03-29 12:13:35 +00:00
fros4943
671629dea0 moved packet_sent function, it was in a HC06-specific unit 2010-03-29 11:48:09 +00:00
joxe
bd6cd03c1d moved prefix to avoid compiler warning 2010-03-26 15:12:57 +00:00
nifi
9508d2c4d7 * Added configurable default number of transmissions for CSMA to use when not specified using packetbuf attributes (CSMA_CONF_MAX_MAC_TRANSMISSIONS).
* Renamed packetbuf attribute PACKETBUF_ATTR_MAX_MAC_REXMIT to PACKETBUF_ATTR_MAX_MAC_TRANSMISSIONS where value 0 (attribute not set) means that default number of transmissions should be used.
2010-03-26 12:29:29 +00:00
joxe
bec1ccc57d added support for all UDP port compressions in hc06 2010-03-26 10:28:51 +00:00
nifi
0ec8d499e4 Bug fix: only call subscriber if set 2010-03-25 19:30:44 +00:00
adamdunkels
a4f9e62295 Added a parameter to collect_open() that specifies whether or not the node should be a router for packets, or only an originator of packets. Updated the collect module to the new annoucement API. 2010-03-25 08:51:07 +00:00
adamdunkels
2559e27414 API change to the announcement module: an annoucement can now be registered without a value. Such announcements are never transmitted to neighbors, until the announcement's value is set. 2010-03-25 08:49:56 +00:00
adamdunkels
4d68bdf74b Bugfix and addition by Dogan Yazar: psock_readbuf() shouldn't wait for a full buffer (which might never happen); a new function for sending strings that batches data and sends full buffers instead of individual strings. 2010-03-24 21:03:32 +00:00
nifi
c623616afd Neighbor state notification also when adding new neighbors 2010-03-24 16:29:45 +00:00
nifi
052c8db9f9 Added option for neighbor state changed notifications 2010-03-24 16:16:33 +00:00
joxe
4a6c6b0534 added route_rm_by_nexthop and small code cleanup 2010-03-23 14:21:04 +00:00
fros4943
95e870cc46 bugfix: structs should be declared static 2010-03-22 11:32:29 +00:00
nvt-se
0eae63b29a Set a higher start ETX. Avoiding adding a neighbor after a failed packet transmission. 2010-03-19 16:55:29 +00:00
adamdunkels
9d06d84255 Renamed the neighbor module to collect-neighbor, as it is only used by the collect module and is not a generic neighbor module 2010-03-19 13:25:15 +00:00
adamdunkels
49009e9cbd Extend the length of announcement packets if they are too short 2010-03-19 13:24:58 +00:00
adamdunkels
2e8bfa5d9a Include new broadcast-announcement and renamed collect-neighbor in compilation 2010-03-19 13:21:24 +00:00
adamdunkels
f2c9b3e813 Remove old neighbor.h inclusion 2010-03-19 13:20:40 +00:00
adamdunkels
3a5be4a7e4 Added broadcast announcement module and collect-neighbor module 2010-03-19 13:17:55 +00:00
adamdunkels
14453e9fb7 Slight API change to support bump functionality 2010-03-19 13:17:31 +00:00
adamdunkels
7b0606cd58 Renamed the neighbor module to collect-neighbor, as it is only used by the collect module and is not a generic neighbor module 2010-03-19 13:17:00 +00:00
adamdunkels
137e02baac Added a bump method that tells the announcement module that a value has changed sufficiently much for it to be pushed out quicker 2010-03-19 13:16:11 +00:00
adamdunkels
17db783fb0 Broadcast announcement back-end that sends announcement data as broadcasts, with increasing transmission intervals 2010-03-19 13:15:19 +00:00
nifi
7f7922a10d typos 2010-03-19 12:54:38 +00:00
joxe
cf9acf4748 made it possible to have zero contexts to avoid stateful compression in hc06 2010-03-19 08:15:20 +00:00
joxe
17a721a7e4 fixed buggy define for Traffic class and Flowlabel compression 2010-03-17 20:57:25 +00:00
adamdunkels
115b3a7c5c Minor timing bugfix: the time between channel checks should not include the time required for the channel check itself 2010-03-17 18:24:06 +00:00
adamdunkels
efeb9944fa Increase the required non-activity periods before turning off the radio; remove the strict phase requirement (which messes up things with low-power streaming) 2010-03-17 16:35:52 +00:00
nvt-se
1a9e00ab78 Purge neighbors that go over a configurable ETX limit. Increase the no-ACK penalty. 2010-03-17 15:08:46 +00:00
nvt-se
4e0ceedc47 Enabled external neighbor removal 2010-03-17 15:00:52 +00:00
fros4943
55f780ec19 removed debugging output 2010-03-17 14:36:46 +00:00
joxe
4f27fcf766 added ipaddr variable if not UIP_ROUTER is defined 2010-03-17 12:30:25 +00:00
joxe
e8916fe01f added hooks for adding an external header compressor 2010-03-17 12:08:59 +00:00
joxe
d113577a8e made UIP_ND6_SEND_RA configurable from platforms and projects 2010-03-16 18:27:22 +00:00
adamdunkels
36b995cc9a Reenabled announcement support 2010-03-16 18:12:34 +00:00
adamdunkels
9be1a65211 Don't set the RELIABLE flag on incoming packets with the ack requested flag set, since it is set on most packets even if they aren't reliable 2010-03-16 18:11:58 +00:00
adamdunkels
b1feac5a00 Bugfixes in low-power streaming mode, and re-added support for announcements. These now use the low-power streaming mode so that active listening for announcments have a radio duty cycle of 16% rather than 100% 2010-03-16 18:11:13 +00:00
nifi
6b7ec2d002 removed uip_router 2010-03-16 15:45:20 +00:00
nifi
75091661e6 fixed typo 2010-03-16 15:41:00 +00:00
joxe
b4adc6bcb5 added fallback interface and removed uip_router 2010-03-16 15:35:03 +00:00
joxe
2b44f809fb added support for extending route entries 2010-03-16 14:11:46 +00:00
joxe
453cf7f2e6 refactoring of hc06 code 2010-03-16 10:21:04 +00:00
nvt-se
7f687b99e6 Debug off by default 2010-03-15 19:22:29 +00:00
joxe
fd3d6c44d0 integration of new uip6 code from Mathilde and Julien - adds routing and improved interface handling 2010-03-15 16:41:24 +00:00
adamdunkels
a9bad71fbd Increased the number of bits that repressent the MAX_RETRANSMITS attribute to allow for more than 7 hop-by-hop retransmissions 2010-03-14 23:01:12 +00:00
adamdunkels
7bab9316da Two major changes:
* Low-power streaming. Experimental support for a low-power mode which
  allows rapid exchange of packets with a 16% duty cycle. Does not
  seem to function correctly yet though.

* Phase locking. When the phase of a neighbor has been detected, the
  sender assumes that the neighbor will keeps it phase and does not
  send more strobes than necessary to hit the receiver's channel
  check - even if the receiver does not acknowledge the reception of
  the strobes when it should have been awake. Instead, the sender
  stops strobing and tries again at a later time.
2010-03-14 22:59:23 +00:00
oliverschmidt
def540e6c0 Avoid newlines in macro expansions as cc65 doesn't support them between the macro name and the open parenthesis of the arguments.
There were btw other even longer lines with expansions of the same macro already present.
2010-03-14 12:13:54 +00:00
joxe
e8bd53cfd8 added typedef of icmp6_error 2010-03-13 09:25:24 +00:00
dak664
0236c6e725 Leave compiler warning for 16 bit timers 2010-03-12 17:51:07 +00:00
joxe
4c2daf9886 started integration of Mathildes and Juliens new uip6 code + made some ND timers configurable 2010-03-12 16:19:19 +00:00
dak664
7c5eed6bda Add includes needed by AVR-gcc, fix compiler warning 2010-03-12 15:23:57 +00:00
dak664
52c9f4bde3 Remove compiler warning 2010-03-12 15:21:14 +00:00
nifi
2cf0fb9cce Changed to use short address mode with short rime addresses 2010-03-12 14:49:21 +00:00
nvt-se
6be0bac1a1 minor include fix + added documentation 2010-03-12 13:40:13 +00:00
nvt-se
881fac7f50 fixed comment 2010-03-12 13:25:14 +00:00
nvt-se
6ce15b14c9 prepend net/ to include paths 2010-03-12 13:23:50 +00:00
nvt-se
c316fc2fa9 Make it possible to provide feedback to the neighbor modules 2010-03-12 13:20:13 +00:00
nvt-se
814dd8bf59 Added generic modules for neighbor information. 2010-03-12 13:19:45 +00:00
joxe
d75ec2da53 fixed so that uip6 sends icmp6 errors from correct source when acting as router - improves support for tracert, etc. 2010-03-11 18:07:37 +00:00
adamdunkels
90bb63a383 Set the (correct) packet attribute to let the MAC layer perform retransmissions 2010-03-09 20:40:50 +00:00
adamdunkels
4b60301727 Don't set the ack flag for broadcast packets 2010-03-09 20:40:11 +00:00
adamdunkels
17f6b3a324 Simplified the structure of the code 2010-03-09 20:38:55 +00:00
adamdunkels
d0e6436a20 Don't call up the netstack if the transmission was deferred 2010-03-09 20:37:02 +00:00
c_oflynn
dc3e6c1877 Fix TC/FL errors in hc-06. Need to verify further 2010-03-09 16:19:44 +00:00
joxe
48a9bff889 added support for dropping packets if hop limit is reached 2010-03-09 15:50:15 +00:00
c_oflynn
1d483a5da4 Fix UDP compression to work per hc-06. More commits to come to fix Traffic Class stuff... 2010-03-09 15:18:03 +00:00
adamdunkels
edda6dd86c Minor bugfix: don't subtract collisions and deferrals from the number of transmissions 2010-03-09 13:23:58 +00:00
adamdunkels
5a6fc2ade0 Bugfix: set up rtmetric before starting to announce it. Set the number of MAC layer retransmissions correctly 2010-03-09 13:21:28 +00:00
adamdunkels
2c3d3e3d73 Bugfix: handle deferred transmissions correctly (don't count them) 2010-03-09 13:20:08 +00:00
adamdunkels
79722b4247 Rework of the timing conditions of ContikiMAC: the old timing did not work well on real hardware, the new one seems to work better 2010-03-09 13:19:05 +00:00
nvt-se
96eb20d235 forward arguments even if REXMIT is not set 2010-03-04 14:17:43 +00:00
dak664
c65e09ceb2 Remove compiler warnings 2010-03-02 15:41:23 +00:00
nifi
5e43a6998b Replaced old framer (framer_get/framer_set) with new NETSTACK style configuration. Added nullrdc-framer that is a nullrdc with framer support. 2010-03-01 13:30:21 +00:00
nifi
0c084b8c68 added random init of sequence number 2010-03-01 13:17:01 +00:00
adamdunkels
524625dfd2 Removed debug string names of packet attribtues 2010-02-28 20:20:19 +00:00
adamdunkels
410d860a93 Improved handling of neighbor phase estimation: instead of busy-waiting while waiting for neighbor's phase, the new code schedules a timer just before neighbor wakes up 2010-02-28 20:19:47 +00:00
adamdunkels
e6fceb7200 Added MAC-layer return value to indicate that a packet transmission was deferred 2010-02-28 20:18:30 +00:00
adamdunkels
ec928a2a19 Make max queueing time depend on retransmission timeout 2010-02-28 14:15:58 +00:00
adamdunkels
e06acc4525 Prod the watchdog if waiting for along time 2010-02-28 14:15:16 +00:00
adamdunkels
74da90a06b Don't count collisions as transmissions 2010-02-28 10:07:17 +00:00
adamdunkels
f95a6cce85 Added function for obtaining packet queue length 2010-02-28 09:20:32 +00:00
adamdunkels
8fe15f7b45 New packet attribute for specifiying MAC layer retransmissions; reorder and commented packet attributes 2010-02-28 09:19:43 +00:00
adamdunkels
970a9eb9c7 Increased neighbor lifetime to allow for longer neighbor announcement intervals 2010-02-28 09:19:04 +00:00
adamdunkels
7165a3866f Significant rework of the Contiki data collection protocol:
* the new version makes use of MAC-layer feedback so that bad paths
  can be identified quicker and then avoided.

* the new code uses transport layer ACKs that contain feedback from
  the collect protocol: when a packet cannot be forwarded due to lack
  of resources, the ACK contains a flag that indicates that the packet
  could not be forwarded. ACKs also contain the routing metric of the
  sender, which improves agility in face of rapid path changes.

* loop detection and management has been improved: with higher path
  metric agility, the system is more prone to short-lived routing
  loops. Instead of dropping looping packets, the new version adjusts
  the routing metric for the routes that exhibit loops so that the
  risk for future loops is reduced.

* make use of packet attributes to inform the MAC layer of how many
  times packets should be retransmitted.
2010-02-28 09:18:01 +00:00
adamdunkels
b6b4941871 Made the number of MAC-layer retransmissions configurable on a per-packet basis, via a packet attribute 2010-02-28 08:35:16 +00:00
adamdunkels
ed88f487c8 Improved detection of link-layer ACKs; increased the time ContikiMAC waits when it has detected a link-layer ACK; increased the number of silence periods required to detect a CCA false positive 2010-02-28 08:33:21 +00:00
adamdunkels
fa1a96636e Bugfix: the compile-time check for UIP_LLADDR_LEN previously generated a run-time error, when it should have generated a compile-time error 2010-02-28 08:30:39 +00:00
adamdunkels
ba0e50a7b7 Set the default number of MAC layer retransmissions for IPv6 packets to 2 2010-02-28 08:29:42 +00:00
joxe
0ab2bc9a31 upgraded sicslowpan to hc-06 - no 48 bit multicast compression support yet 2010-02-25 15:50:58 +00:00