Commit Graph

102 Commits

Author SHA1 Message Date
George Oikonomou
08c884afa0 Improve the CC2538 extended RF API implementation
* Decouple 64-bit address from LINKADDR_SIZE
* get and set object from/to the start/end of the src/dest buffer
* We expect size == 8 (rather than size < 8) for both get_ and set_object. Error otherwise
* The RF no longer sets parameters by itself. We let the platform do this, using the extended API.
2014-04-23 12:20:16 +01:00
Ian Martin
ee05810904 Changes suggested by @bthebaudeau. 2014-04-18 10:29:47 -04:00
George Oikonomou
49bf7cc241 Merge pull request #616 from hexluthor/listing
CC2538: Add a Makefile rule to generate a final assembly listing.
2014-04-17 22:13:52 +01:00
Benoît Thébaudeau
d93d129da6 cc2538: uart: Make it possible to use several UARTs simultaneously
This avoids the limitation of having a single UART available at runtime, without
duplicating code.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2014-04-17 18:53:44 +02:00
Ian Martin
2cf730a1c6 Un-indent preprocessor directives. 2014-04-17 10:39:00 -04:00
Ian Martin
23a3a7f004 Add a note about "make cc2538-demo.lst" to the platform README. 2014-04-16 10:47:01 -04:00
Ian Martin
16936d864c Rename FLASH_CCA_CONF_BOOTLDR_BACKDOOR_PIN to FLASH_CCA_CONF_BOOTLDR_BACKDOOR_PORT_A_PIN. 2014-04-16 10:19:37 -04:00
Ian Martin
1a63c47cf9 CC2538: Add CONF parameters to select boot loader backdoor pin and logic level. 2014-04-15 17:36:55 -04:00
Brad Campbell
af27d2d252 [CC2538-SPI] Implement SPI_FLUSH, spi mode, !CS
Because the CC2538 has a multi-byte SPI RX FIFO, flushing the buffer
requires more than just a single read. This adds a loop that empties the
entire RX buffer on a FLUSH().

Different SPI chips needs different SPI settings. This commit adds a
function that allows chip drivers to configure the SPI peripheral before
using it.

The frame pin the driver was using as a chip select does not work as
most devices expect it to. It toggles after every byte, and most chips
interpret that as end of message. To make drivers more reliable, each
chip driver should setup a GPIO and assert it as needed.
2014-04-15 14:07:10 -04:00
George Oikonomou
33abe26ec8 Merge pull request #411 from ADVANSEE/cc2538-adc
cc2538: Add adc driver and example
2014-04-13 03:05:12 +01:00
Ian Martin
336224633a Eliminate UART_CONF_IBRD and UART_CONF_FBRD. 2014-03-22 10:26:03 -04:00
George Oikonomou
6dc9dfa6c2 Merge pull request #551 from JelmerT/feature-cc2538-bsl
CC2538 serial boot loader python script
2014-03-09 02:11:36 +00:00
Jelmer Tiete
34e48f4233 Added bootloader backdoor configuration for cc2538DK in contiki-conf.h and selector in startup-gcc.c. Updated Makefile.cc2538dk to support direct uploading. Also updated the platform readme to include the workflow with cc2538-bsl. 2014-03-07 15:44:08 +01:00
Brad Campbell
d14f0d5eed CC2538: add secondary location to ieee address
The CC2538 currently has two addressing options: a hardcoded address set
at compile time or the address stored in primary address section of the
info page. This commit adds the option to choose the secondary location
of the ieee address from the info page, or any memory address.

To use, define `IEEE_ADDR_CONF_USE_SECONDARY_LOCATION` in `project-conf.h`
or similar.

For example:

    #define IEEE_ADDR_CONF_USE_SECONDARY_LOCATION 1
2014-03-06 10:31:30 -05:00
George Oikonomou
a63376f8be Use -Os for CC2538 builds
As discussed in #503, -Os was broken with one of the toolchains
recommended in the platform's README and for that reason we were
using -O2 by default.

This commit sets the default to -Os and updates the README to no
longer recommend the toolchain in question
2014-01-31 20:02:43 +00:00
Adam Dunkels
45265249fc Changed the name of the rimeaddr module to linkaddr 2014-01-29 20:12:24 +01:00
Adam Dunkels
824d2047da Add the explicit list of modules, since we cannot do auto-dependency management of them 2014-01-26 23:20:47 +01:00
Adam Dunkels
7a740b382f Moved the individual MODULE definitions from the top-level Makefile.include into the individual platforms' Makefiles 2014-01-26 23:20:36 +01:00
Adam Dunkels
5f3fe7f7c7 Updated include paths for the moved files under net/ 2014-01-26 23:20:23 +01:00
Benoît Thébaudeau
dbba311270 cc2538: Add adc driver and example
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-12-06 22:07:45 +01:00
George Oikonomou
f2c552bb55 Merge pull request #478 from ADVANSEE/cc2538-startup-cleanup
cc2538: Startup cleanup
2013-12-05 11:07:19 -08:00
George Oikonomou
63298843b3 Merge pull request #491 from g-oikonomou/remove-lpp-from-readme
Remove LPP discussion from the cc2538 README
2013-12-05 11:07:03 -08:00
George Oikonomou
17b2150081 Merge pull request #463 from ADVANSEE/cc2538-ports-pins
cc2538: Clean up and improve port and pin definitions
2013-12-05 10:31:29 -08:00
George Oikonomou
6f22fd6642 Remove LPP discussion from the cc2538 README 2013-12-05 18:16:22 +00:00
Benoît Thébaudeau
a2686e581e cc2538: Add header file for flash CCA page and use it
Create a dedicated header file with all the definitions for the flash lock bit
page and customer configuration area. This avoids duplicating those definitions
in the startup-gcc.c files of all CC2538-based platforms, and this also allows
to easily manipulate the CCA from outside startup-gcc.c (e.g. for on-the-air
firmware update).

The definitions are now complete contrary to what was in startup-gcc.c:
 - Definitions have been added to select the bootloader backdoor pin and active
   level if enabled.
 - Definitions have been added to access the page and debug lock bits. The debug
   lock bit can be used to prevent someone from reading back a programmed
   firmware through JTAG if the firmware binary image has to be confidential,
   which should be combined with a disabled bootloader backdoor.
 - The application entry point is now tied to the beginning of the .text section
   instead of to the beginning of the flash. This allows projects using custom
   linker scripts to place the application entry point anywhere in the flash,
   which can be useful e.g. for on-the-air firmware update.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-12-05 18:45:51 +01:00
Benoît Thébaudeau
65806f53eb cc2538dk: startup-gcc: Do not redefine SYS_CTRL_EMUOVR
SYS_CTRL_EMUOVR is already defined in sys-ctrl.h, so #include this header file
instead of redefining SYS_CTRL_EMUOVR in startup-gcc.c.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-12-05 18:41:49 +01:00
George Oikonomou
acebfa2932 Merge pull request #466 from ADVANSEE/cc2538dk-slip-enable
cc2538dk: Make it possible to override SLIP_ARCH_CONF_ENABLED
2013-12-05 09:11:38 -08:00
Benoît Thébaudeau
436b585d7e cc2538dk: Make it possible to override SLIP_ARCH_CONF_ENABLED
As the comment in contiki-conf.h says, the automatic definition of
SLIP_ARCH_CONF_ENABLED works only if UIP_FALLBACK_INTERFACE is tied to SLIP. If
UIP_FALLBACK_INTERFACE is set to another interface, SLIP_ARCH_CONF_ENABLED is
still automatically set to 1, leading to unwanted SLIP_END characters from
dbg.c:putchar() being printed on the UART.

This change makes it possible to force the definition of SLIP_ARCH_CONF_ENABLED
(e.g. from project-conf.h), so that it can be disabled if UIP_FALLBACK_INTERFACE
is used with something else than SLIP.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-25 20:48:52 +01:00
Benoît Thébaudeau
d2f3795a30 cc2538: Clean up port and pin definitions
Homogenize port and pin definitions naming:
 - PERIPHERAL_FUNCTION_PORT for the port ID,
 - PERIPHERAL_FUNCTION_PIN for the pin ID,
 - PERIPHERAL_FUNCTION_PORT_BASE for the port base,
 - PERIPHERAL_FUNCTION_PIN_MASK for the pin mask.

Define only PERIPHERAL_FUNCTION_PORT and PERIPHERAL_FUNCTION_PIN in board.h, and
deduce PERIPHERAL_FUNCTION_PORT_BASE and PERIPHERAL_FUNCTION_PIN_MASK in the
driver from the former definitions.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-25 15:00:41 +01:00
George Oikonomou
4eeb527cb8 Don't specify -DUIP_CONF_IPV6 in platform makefiles
Makefile.include has done it for us already, we no longer need to do so ourselves
2013-11-20 14:52:33 +00:00
George Oikonomou
b10c78f854 Merge pull request #425 from ADVANSEE/cc2538-gpio
cc2538: gpio: Bug fix and various improvements
2013-11-15 13:04:09 -08:00
George Oikonomou
98a1f2dfa9 Merge pull request #408 from ADVANSEE/cc2538-uart
cc2538: lpm: Add registration mechanism for peripherals and use it
2013-11-15 12:57:03 -08:00
Benoît Thébaudeau
680050861c cc2538: gpio: Use accessor macros
Use the GPIO accessor macros instead of copying raw register access code all
over the place. This is cleaner and less error prone.

This fixes the setting of the USB pull-up resistor that worked only by chance on
the CC2538DK because it is controlled by the pin 0 of the used GPIO port.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-15 19:57:44 +01:00
Benoît Thébaudeau
0692ee251d cc2538: usb: Use the new LPM peripheral registration
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-15 17:14:45 +01:00
Benoît Thébaudeau
d35732505b cc2538: lpm: Add registration mechanism for peripherals
Some peripherals have their clocks automatically gated in PM1+ modes, so they
cannot operate. This new mechanism gives peripherals a way to prohibit PM1+
modes so that they can properly complete their current operations before
entering PM1+.

This mechanism is implemented with peripheral functions registered to the LPM
module. These functions return whether the associated peripheral permits or not
PM1+ modes. They are called by the LPM module each time PM1+ might be possible.
If any of the peripherals wants to block PM1+, then the system is only dropped
to PM0.

Partly from: George Oikonomou
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-15 17:09:22 +01:00
George Oikonomou
d08a87880c Merge pull request #410 from ADVANSEE/cc2538-sys_ctrl
cc2538: sys_ctrl: Make it possible to use the 32-kHz crystal
2013-11-15 07:42:45 -08:00
Benoît Thébaudeau
47d570343e cc2538: sys_ctrl: Make it possible to use the 32-kHz crystal
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-15 15:52:10 +01:00
Benoît Thébaudeau
6452624120 cc2538dk: Make it possible to override UIP_CONF_TCP_MSS
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-15 15:41:58 +01:00
George Oikonomou
2893af5e5d Document alternative toolchain for the CC2538DK 2013-11-14 12:22:21 +00:00
George Oikonomou
2957d44ff8 Merge pull request #352 from lab11/cc2538-spi-driver
Added SPI driver for CC2538
2013-09-28 13:25:17 -07:00
Brad Campbell
e2af903d05 Added SPI driver for CC2538
This uses the core/dev/spi.h header and implements the spi_init()
function and the various macros for SPI operation. ssi.h contains all of
the register locations and information.

This implementation is not very versatile, mostly because I don't how to
make it flexible in the contiki system. It supports pin muxing for the
four spi pins, but other than that picks sensible defaults.

The SPI macros (like SPI_READ()) are defined in
cpu/cc2538/spi-arch.h. In order to use the SPI driver, add the following
includes to your project:

    #include "spi-arch.h
    #include "dev/spi.h"
2013-09-27 17:46:15 -04:00
Brad Campbell
766fc5a174 Add conf checks to CC2538dk conf file
Allows for specific apps to control more settings of the platform.
2013-09-11 21:43:13 -04:00
Simon Duquennoy
248301a041 Fix naming issues and includes in uip-ds6-nbr.h 2013-08-19 17:48:30 +02:00
Simon Duquennoy
ff093a2b50 Removed now unused per-module neighbor table size configs. Use NEIGHBOR_CONF_MAX_NEIGHBORS instead. 2013-08-19 17:48:30 +02:00
George Oikonomou
6c6013b898 Make the CC2538 UART driver more configurable
* We can now very easily switch between UART0 and UART1 through a define
* We can also configure the UART RX and TX port/pin through defines
2013-08-09 12:20:25 +01:00
Adam Dunkels
70eb439a88 Merge pull request #325 from g-oikonomou/cc2538-tools-release
CC2538 IEEE address and README updates
2013-08-07 08:25:30 -07:00
George Oikonomou
81318909e0 Read IEEE address from InfoPage by default 2013-08-07 15:28:33 +01:00
George Oikonomou
6b01b36cc9 Update readme references and tool download URLs 2013-08-07 15:28:04 +01:00
George Oikonomou
64c16d4be1 Adjust a config define to its new name 2013-08-07 15:27:19 +01:00
Simon Duquennoy
defcc639ce Use no metric container when having MRHOF with ETX, as specified in RFC6719. Renamed rpl-of-etx to rpl-mrhof. 2013-07-23 19:36:38 +02:00
George Oikonomou
8b5b2bd4d8 CC2538 Documentation typo and grammar fixes 2013-04-17 15:41:41 +01:00
George Oikonomou
40f49948e6 New Platform: TI CC2538 Development Kit
This commit adds cpu, platform and example files,
providing support for running Contiki on TI's cc2538 DK
2013-04-06 21:07:31 +01:00