Commit Graph

2678 Commits

Author SHA1 Message Date
George Oikonomou
d7028652fe Remove legacy sniffer configuration: zoul 2016-08-12 01:23:50 +01:00
George Oikonomou
35c37f356c Remove legacy sniffer configuration: openmote-cc2538 2016-08-12 01:23:50 +01:00
George Oikonomou
4a4b3a344d Remove legacy sniffer configuration: cc2538dk 2016-08-12 01:23:50 +01:00
George Oikonomou
07f984eec2 Remove legacy sniffer references: Docs 2016-08-12 01:23:50 +01:00
George Oikonomou
dbd4f630fd Remove built-in sniffer support: CC13xx PROP mode 2016-08-12 01:23:49 +01:00
George Oikonomou
0de1dc1025 Remove built-in sniffer support: CC2530 2016-08-12 01:23:49 +01:00
George Oikonomou
1a4947499c Merge pull request #1819 from bthebaudeau/cc2538-en-32k-xtal
CC2538: Use the 32.768-kHz crystal if present
2016-08-11 23:48:04 +01:00
George Oikonomou
47265c9305 Merge pull request #1813 from arurke/cc26xx_cc13xx_i2c_fixes
CC26xx/CC13xx fix for burst TX followed by burst RX
2016-08-11 23:47:42 +01:00
Benoît Thébaudeau
9e03df6cb7 CC2538: Use the 32.768-kHz crystal if present
Enable the 32.768-kHz crystal on all the CC2538 platforms where it is
present in order to get a better time accuracy.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-08-11 23:49:03 +02:00
Benoît Thébaudeau
ae5205f9e2 doxygen: Fix orphan modules
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-08-10 04:56:15 +02:00
Andreas Urke
8128986ccd Remove unecessary bool 2016-08-09 22:56:53 +02:00
Andreas Urke
e1359519ab Fix i2c multiple write bug, as reported by Ron Segal: https://sourceforge.net/p/contiki/mailman/message/34633862/ 2016-08-09 22:56:28 +02:00
Nicolas Tsiftes
2e4c6eef54 Merge pull request #1804 from mdlemay/docker
galileo: Add support for containerized build environment
2016-08-09 15:19:28 +02:00
Nicolas Tsiftes
956497a672 Merge pull request #1805 from mdlemay/ipv6-link-stats
galileo: Build link-stats.c when IPv6 is enabled
2016-08-08 11:39:42 +02:00
Michael LeMay
bde8eb35ae x86, galileo: Fix UART system call authorization initialization
This patch fixes UART system call authorization initialization (when
protection domain support is enabled) to only initialize the system call
entrypoint and authorization data structures once, prior to per-port
setup. Previously, if two UARTs were configured, the setup procedure for
the second UART would erase the system call authorization for the
first (console) UART, resulting in a crash upon the next attempt to
perform console output.
2016-08-04 16:09:44 -07:00
Michael LeMay
31ad67abd7 x86: Support configurable UART baud rate
This patch extends the Intel Quark X1000 SoC UART initialization API to
accept a numeric baud rate specification.
2016-08-03 07:58:51 -07:00
Michael LeMay
e50b73c9b1 galileo: Add support for containerized build environment
This patch adds a Dockerfile for building a container configured as a
build environment for Intel Galileo boards.  This patch also provides
documentation for using the containerized build environment.  Finally, it
streamlines the instructions for booting Contiki on Galileo and includes
other documentation refinements.
2016-08-02 20:54:41 -07:00
Michael LeMay
836fa4d6fa galileo: Build link-stats.c when IPv6 is enabled
This is required by the IPv6 implementation in Contiki OS.
2016-07-31 17:03:42 -07:00
Sumankumar Panchal
6dfd358821 TSCH port for CC2538 based platforms. 2016-07-22 09:38:25 +05:30
George Oikonomou
dcad5e7e3f Merge pull request #1727 from g-oikonomou/contrib/cc26xx/trng
Add CC13xx/CC26xx TRNG Support
2016-07-16 23:34:53 +01:00
George Oikonomou
fe571c7dc3 Merge pull request #1754 from atiselsts/enhancement/cc26xx_reduced_guard_time
CC26xx: change default TSCH guard time to 1.8ms
2016-07-16 19:47:16 +01:00
Atis Elsts
081ec100a4 TSCH: add RADIO_DELAY_BEFORE_DETECT to rx guard time when waiting for a packet to be received 2016-07-16 18:08:41 +01:00
Antonio Lignan
0d0e726b38 Merge pull request #1764 from alignan/pull/zoul-dht22
Added DHT22 sensor to Zoul-based platforms
2016-07-15 12:50:34 -05:00
Robert Olsson
a8aa778b31 Removed unused file platform/avr-rss2/dev/ds18b20.c 2016-07-15 13:17:40 +02:00
Oliver Schmidt
98a795b967 Merge pull request #1730 from groessler/something_to_pull
Some 6502 target changes
2016-07-06 09:17:39 +02:00
Antonio Lignan
d5e2a779d4 Added DHT22 sensor to Zoul-based platforms 2016-07-04 18:00:09 +02:00
Antonio Lignan
6360a09cc7 Merge pull request #1726 from feshie/pr-zoul-motes-flash-fix
zoul: Add support for flashing to multiple devices
2016-06-30 12:13:41 +02:00
Antonio Lignan
17d784ead3 Merge pull request #1745 from alignan/pull/z1-contiki-conf
Minor changes to z1/contiki-conf.h
2016-06-30 09:47:16 +02:00
Atis Elsts
b6617f17c5 CC26xx: always request HF crystal oscillator at radio on() 2016-06-29 16:41:33 +03:00
George Oikonomou
91255f5a81 Merge pull request #1711 from xukai871105/master
One fix to sensorTag board_i2c.c
2016-06-28 23:55:02 +01:00
Atis Elsts
1e4141b589 CC26xx: change default TSCH guard time to 1.8ms 2016-06-29 01:14:12 +03:00
George Oikonomou
3a105f2141 Disable CC2650_FAST_RADIO_STARTUP by default
`CC2650_FAST_RADIO_STARTUP` is required for TSCH, but it currently breaks ContikiMAC. We set the default value to the one that will work with the default choice of RDC.

Fixes #1744
2016-06-27 17:20:26 +01:00
Arthur Fabre
ab1652648e zoul: Add support for flashing to multiple devices
This adds support for flashing to multiple devices, by implementing the
$MOTES option used by the Z1.
This replaces the $PORT interface, as it only allowed flashing to one
device at a time, and the $MOTES interface was still used for other
tasks (such as getting a list of connected devices).

A foreach loop is used to dynamically create an upload rule per device
that needs to be flashed.
The "main" upload rule depends on the device specific ones.
This allows for parallel flashing.

The PORT variable can still be sued for backwards compatibility.

Changed the MOTES variable that makes a $(shell) call to not be
recursively expanded.
2016-06-27 11:23:45 +01:00
Antonio Lignan
108e43b103 Made configuration parameters easily overridable to be consistent with Travis CI tests 2016-06-25 23:17:26 +02:00
Antonio Lignan
99822545c5 Added BOARD_STRING to the Z1 platform 2016-06-24 23:58:32 +02:00
Antonio Lignan
0034322fe0 Made configuration parameters easily overridable from project-conf.h (without having to undef first) 2016-06-24 23:54:08 +02:00
Antonio Lignan
1002b7ffee Fixed spacing 2016-06-24 23:36:40 +02:00
Antonio Lignan
442e1be391 Moved project-conf.h inclusion to the top of contiki-conf.h 2016-06-24 23:34:23 +02:00
Christian Groessler
c26085ec8c Some 6502 target changes
- platform/atarixl/Makefile.atarixl: put two more objects into high memory
- platform/atarixl/contiki-conf.h: define WWW_CONF_WGET_EXEC
- tools/6502/Makefile: add 'clean' target; remove unused CONTIKI define
2016-06-17 16:42:50 +02:00
Nicolas Tsiftes
a8989f9f1c Merge pull request #1724 from nvt/coffee-simplify
Coffee: minor enhancements
2016-06-15 18:56:10 +02:00
George Oikonomou
adfeaa5500 Add missing include 2016-06-15 10:31:55 +01:00
Nicolas Tsiftes
5010309005 Make the I/O semantics functionality in Coffee unconditional so that the API becomes consistent across platforms.
Change certain CPP conditionals into C conditionals, which should be possible for the compiler to optimize at runtime. This makes the source code easier to read.
2016-06-14 21:08:00 +02:00
Atis Elsts
3a99639294 cc26xx: implement CC2650_FAST_RADIO_STARTUP option, required for TSCH 2016-06-14 00:54:33 +03:00
Atis Elsts
3ff8aa8ad8 srf06-cc26xx: add node_id variable 2016-06-14 00:54:32 +03:00
Atis Elsts
f99511f494 srf06-cc26xx: add default TSCH configuration for the platform 2016-06-14 00:54:32 +03:00
George Oikonomou
4b67e21d2e Merge pull request #1714 from alignan/pull/add-relay
Added generic relay driver for the zoul-based platforms
2016-06-13 19:45:46 +01:00
Simon Duquennoy
4fd8f67053 Merge pull request #1715 from sumanpanchal/zoul-tsch
TSCH port for Zolertia ReMote/Zoul.
2016-06-13 09:03:16 +02:00
Sumankumar Panchal
373fda46f7 TSCH port for Zolertia ReMote/Zoul. 2016-06-12 16:37:01 +05:30
Benoît Thébaudeau
9845973971 cc2538: Print SoC information upon startup
If STARTUP_CONF_VERBOSE is enabled, print SoC information upon startup.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-06-11 23:23:38 +02:00
xukai
bd0716b044 Merge remote-tracking branch 'contiki-os/master' 2016-06-10 12:54:59 +08:00