62 Commits

Author	SHA1	Message	Date
nvt-se	9c9c2573c3	lock UART for RS232 in putchar	2008-05-27 13:03:19 +00:00
nvt-se	bff587e32c	lock SPI bus when erasing	2008-05-27 13:01:27 +00:00
nvt-se	acf01a0c58	fixed compilation error.	2008-03-31 14:32:00 +00:00
nvt-se	067e4c3c06	include contiki-conf.h for type definitions.	2008-03-31 13:48:03 +00:00
nvt-se	f7b3d9fc99	moved files to sd/	2008-03-31 13:45:52 +00:00
nvt-se	2822ff7ddb	made more conform with contiki indentation.	2008-03-28 23:03:05 +00:00
nvt-se	10cabda581	lock wait function from Michael Baar.	2008-03-28 16:06:28 +00:00
nvt-se	6486460e3f	locking bugfix from Michael Baar.	2008-03-28 15:59:58 +00:00
nvt-se	3fec8ee5e7	synced with newer version by Michael Baar.	2008-03-28 15:58:43 +00:00
nvt-se	5631c92416	use three different input channels for the accelerometer.	2008-03-27 13:04:59 +00:00
nvt-se	1d3bae48dd	added sd card support.	2008-02-28 15:49:01 +00:00
nvt-se	2cc0135e35	cleaned up and fixed an error checking problem in the locking code.	2008-02-28 15:11:22 +00:00
nvt-se	f0891be218	added clear channel assessment timeout. long to begin with.	2007-12-20 14:44:31 +00:00
fros4943	d0997c2dab	major bugfix: padding synch with zero	2007-12-20 13:36:59 +00:00
nvt-se	abb2731ed7	corrected comparison when bits don't need shifting.	2007-12-20 10:48:01 +00:00
nvt-se	7a6a9e62e4	improved logic.	2007-12-19 13:25:41 +00:00
nvt-se	1f00c20815	state variable must be volatile.	2007-12-19 13:09:01 +00:00
nvt-se	b4a8641dda	removed printf's.	2007-12-18 15:27:43 +00:00
nvt-se	f9d24f0d24	Wake up from sleep in the interrupt when the receiver process is going ... to be polled.	2007-12-18 15:26:25 +00:00
nvt-se	ab115e4b10	Removed deprecated function.	2007-12-17 20:18:29 +00:00
nvt-se	1566f55e04	use smaller payload buffer size and provision for synchronization word in ... the total buffer.	2007-12-17 20:15:53 +00:00
nvt-se	bcefffb0e7	set ev to valid value.	2007-12-17 18:48:50 +00:00
nvt-se	004143b6b8	set rxlen to zero before enabling interrupts.	2007-12-17 16:37:15 +00:00
nvt-se	2288cdecbb	small cleanup.	2007-12-17 16:23:32 +00:00
fros4943	479d74ce6a	added receiver process outside interrupt	2007-12-17 15:53:57 +00:00
nvt-se	5f1ca4ccdf	use synchronous transmission.	2007-12-17 15:26:47 +00:00
nvt-se	2a0351afb4	improved uip support and cleaned up the source.	2007-12-17 13:33:09 +00:00
nvt-se	665c58fd2a	Contributions from Michael Baar: ... CC1020 o Turns off only after transmission has ended and not in between o Using events for DMA takes too long. It should use a callback when DMA finishes to turn off the transmit mode as early as possible. Core/UART o Added profiling and energest initialization o Changed low-power mode from LPM1 to LPM3	2007-12-13 12:51:38 +00:00
nvt-se	486ea95b4f	Limited support for energy estimation.	2007-12-10 12:49:08 +00:00
nvt-se	46b6ce9193	Conform to the radio_driver interface.	2007-11-18 12:25:22 +00:00
nvt-se	c90a758ac5	Detect if the medium is busy right before sending.	2007-11-12 21:17:47 +00:00
nvt-se	0e4429068b	Added a carrier sensing function.	2007-11-07 15:34:41 +00:00
nvt-se	ee59f1fe34	Use a fresh RSSI value in the read function.	2007-11-07 15:26:00 +00:00
nvt-se	a604013a88	Added more flags for the status register.	2007-11-07 15:23:35 +00:00
nvt-se	366d845336	DMA destination is now given as a parameter instead of being hardwired.	2007-11-06 15:08:55 +00:00
nvt-se	045225fa05	Made driver less platform-dependent and added support for msb-430.	2007-10-22 12:19:58 +00:00
nvt-se	2d0225b0e4	Safeguard for invalid packets.	2007-10-04 10:02:08 +00:00
nvt-se	fb9b800c53	More clear power down procedure. Now it is required that cc1020_on ... is called before anyone can send after the power down.	2007-10-02 14:05:45 +00:00
nvt-se	4e8bdb1c08	Power managment is handled by another layer.	2007-10-01 11:59:36 +00:00
nvt-se	c0686e80f1	Added definitions for the MAIN register.	2007-10-01 11:56:49 +00:00
nvt-se	24ffa8cfaf	support third DMA line.	2007-09-21 13:51:09 +00:00
nvt-se	6955e028da	Use splhigh and splx.	2007-09-14 19:20:54 +00:00
nvt-se	290f41db06	better comments. ... enable interrupt later.	2007-09-14 19:20:24 +00:00
nvt-se	ca733ddfce	Added some statistics.	2007-09-14 19:14:54 +00:00
nvt-se	928c22eda1	Minor refactoring and improved compliance with the radio interface.	2007-09-14 18:51:51 +00:00
nvt-se	81174c6389	cr->lf	2007-08-20 11:01:13 +00:00
nvt-se	96e06d1dde	Standardized integer types. ... Removed unecessary volatility. Make sure that the random back-off is only if the channel is busy.	2007-08-16 20:38:40 +00:00
nvt-se	defbe1d9ac	use new function.	2007-08-16 20:29:56 +00:00
nvt-se	9017949535	Improved interface and C standard compatibility.	2007-08-16 20:29:18 +00:00
nvt-se	6983417307	forgot return.	2007-08-16 17:10:49 +00:00