Commit Graph

11867 Commits

Author SHA1 Message Date
Antonio Lignan
0a02f0ac7c Zoul: fixed voltage divider relationship 2016-08-16 14:24:13 +02:00
Antonio Lignan
3550d43b47 Merge pull request #1794 from g-oikonomou/bugfix/cc13xx/prop-set-channel
Fix PROP mode channel switching
2016-08-16 12:57:43 +02:00
George Oikonomou
acbc482e55 Merge pull request #1824 from bthebaudeau/cc2538-fix-garbled-uart
cc2538: uart: Fix garbled output occurring upon lpm_enter()
2016-08-16 08:47:09 +01:00
Benoît Thébaudeau
a52a3d94d3 cc2538: uart: Fix garbled output occurring upon lpm_enter()
lpm_enter() must not enter PM1+ if the UART is transmitting. Otherwise,
the UART clock gets disabled, and its TX is broken.

The commit b8b54a033c had already
partially fixed this issue, but it could still occur while transmitting
stop bits because, contrary to UART_FR.BUSY, UART_FR.TXFE takes only the
data bits into account, not the stop bits.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-08-15 03:07:52 +02:00
George Oikonomou
3e7177dcc8 Add sensniff example README 2016-08-12 15:58:02 +01:00
George Oikonomou
20dc86c039 Add sensniff travis tests 2016-08-12 15:58:02 +01:00
George Oikonomou
ac2dcb8b03 Add sensniff example Makefile 2016-08-12 15:58:02 +01:00
George Oikonomou
4922925c07 Add sensniff support: ev-aducrf101mkxz 2016-08-12 15:58:02 +01:00
George Oikonomou
166f90e4df Add sensniff support: zoul 2016-08-12 15:58:02 +01:00
George Oikonomou
9e91a3832d Merge pull request #1820 from alignan/pull/motelist-firefly
Zoul: added firefly to motelist targets
2016-08-12 13:38:12 +01:00
Yasuyuki Tanaka
8bca703282 Remove RPL_CONF_WITH_NON_STORING definition 2016-08-12 14:05:14 +02:00
Antonio Lignan
23eb3756c0 Zoul: added firefly to motelist targets 2016-08-12 13:21:09 +02:00
Antonio Lignan
1cd39a2621 Merge pull request #1780 from g-oikonomou/bugfix/cc2538/sniffer
Don't flush the CC2538 RF RX FIFO unconditionally
2016-08-12 12:09:12 +02:00
George Oikonomou
d8fcaf9dec Add sensniff support: z1 2016-08-12 01:23:51 +01:00
George Oikonomou
3cebc42a2a Add sensniff support: cc13xx/cc26xx 2016-08-12 01:23:51 +01:00
George Oikonomou
525bafcc3c Add sensniff support: openmote-cc2538 2016-08-12 01:23:51 +01:00
George Oikonomou
63941d849a Add sensniff support: jn516x 2016-08-12 01:23:51 +01:00
George Oikonomou
690c299bb0 Add sensniff support: cc2538dk 2016-08-12 01:23:51 +01:00
George Oikonomou
1e6730758d Add sensniff support: cc2530dk 2016-08-12 01:23:51 +01:00
George Oikonomou
c5a3a4e05e Add off-the-shelf sensniff drivers
Can be re-used by any platform that uses any of those CPUs
2016-08-12 01:23:51 +01:00
George Oikonomou
a8dcb6566e Add sensniff example core files 2016-08-12 01:23:51 +01:00
George Oikonomou
39e8435141 Add 460800 baud rate support to Z1 2016-08-12 01:23:50 +01:00
George Oikonomou
983a618a36 Extend CC13xx PROP mode driver
We now write a dummy LQI in read() and we also add support for `RADIO_PARAM_RX_MODE` in `set_value()`
2016-08-12 01:23:50 +01:00
George Oikonomou
d7028652fe Remove legacy sniffer configuration: zoul 2016-08-12 01:23:50 +01:00
George Oikonomou
35c37f356c Remove legacy sniffer configuration: openmote-cc2538 2016-08-12 01:23:50 +01:00
George Oikonomou
4a4b3a344d Remove legacy sniffer configuration: cc2538dk 2016-08-12 01:23:50 +01:00
George Oikonomou
07f984eec2 Remove legacy sniffer references: Docs 2016-08-12 01:23:50 +01:00
George Oikonomou
63417cba0e Remove legacy zoul/CC1200 sniffer example 2016-08-12 01:23:50 +01:00
George Oikonomou
32e4f0f432 Remove legacy CC2538 sniffer example 2016-08-12 01:23:50 +01:00
George Oikonomou
fa769b98e9 Remove legacy CC2530 sniffer example 2016-08-12 01:23:49 +01:00
George Oikonomou
b0672713bb Remove built-in sniffer support: aducrf101 2016-08-12 01:23:49 +01:00
George Oikonomou
a932dfa6df Remove built-in sniffer support: CC2538 2016-08-12 01:23:49 +01:00
George Oikonomou
a52d50f332 Remove built-in sniffer support: CC1200 2016-08-12 01:23:49 +01:00
George Oikonomou
dbd4f630fd Remove built-in sniffer support: CC13xx PROP mode 2016-08-12 01:23:49 +01:00
George Oikonomou
0de1dc1025 Remove built-in sniffer support: CC2530 2016-08-12 01:23:49 +01:00
George Oikonomou
1a4947499c Merge pull request #1819 from bthebaudeau/cc2538-en-32k-xtal
CC2538: Use the 32.768-kHz crystal if present
2016-08-11 23:48:04 +01:00
George Oikonomou
47265c9305 Merge pull request #1813 from arurke/cc26xx_cc13xx_i2c_fixes
CC26xx/CC13xx fix for burst TX followed by burst RX
2016-08-11 23:47:42 +01:00
Benoît Thébaudeau
9e03df6cb7 CC2538: Use the 32.768-kHz crystal if present
Enable the 32.768-kHz crystal on all the CC2538 platforms where it is
present in order to get a better time accuracy.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-08-11 23:49:03 +02:00
Nicolas Tsiftes
209e16890b Merge pull request #1815 from bthebaudeau/fix-dox-orphan-mods
doxygen: Fix orphan modules
2016-08-11 15:14:35 +02:00
Benoît Thébaudeau
ae5205f9e2 doxygen: Fix orphan modules
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-08-10 04:56:15 +02:00
Andreas Urke
8128986ccd Remove unecessary bool 2016-08-09 22:56:53 +02:00
Andreas Urke
e1359519ab Fix i2c multiple write bug, as reported by Ron Segal: https://sourceforge.net/p/contiki/mailman/message/34633862/ 2016-08-09 22:56:28 +02:00
Nicolas Tsiftes
2e4c6eef54 Merge pull request #1804 from mdlemay/docker
galileo: Add support for containerized build environment
2016-08-09 15:19:28 +02:00
Nicolas Tsiftes
956497a672 Merge pull request #1805 from mdlemay/ipv6-link-stats
galileo: Build link-stats.c when IPv6 is enabled
2016-08-08 11:39:42 +02:00
Nicolas Tsiftes
d43f2e2a34 Merge pull request #1797 from gebart/pr/rpl-func-prototype
core/net/rpl: Fix function declaration isn’t a prototype
2016-08-08 11:38:38 +02:00
Nicolas Tsiftes
c535c5b82f Merge pull request #1810 from mdlemay/conf-serial-baud
x86: Support configurable UART baud rate and fix initialization
2016-08-08 11:36:55 +02:00
Michael LeMay
bde8eb35ae x86, galileo: Fix UART system call authorization initialization
This patch fixes UART system call authorization initialization (when
protection domain support is enabled) to only initialize the system call
entrypoint and authorization data structures once, prior to per-port
setup. Previously, if two UARTs were configured, the setup procedure for
the second UART would erase the system call authorization for the
first (console) UART, resulting in a crash upon the next attempt to
perform console output.
2016-08-04 16:09:44 -07:00
George Oikonomou
e0fcbe672f Merge pull request #1809 from simonduq/pr/fix-travis
Fixes https://github.com/contiki-os/contiki/issues/1808
2016-08-03 16:06:53 +01:00
Michael LeMay
31ad67abd7 x86: Support configurable UART baud rate
This patch extends the Intel Quark X1000 SoC UART initialization API to
accept a numeric baud rate specification.
2016-08-03 07:58:51 -07:00
Simon Duquennoy
a3c8fe6724 Travis: remove all tests involving TSCH compilation on z1, which resulted in stochastic off-by-2-bytes linker errors 2016-08-03 16:00:31 +02:00