Adam Dunkels
b85bc3379c
Bugfix in clock_wait() declaration. Various style fixes.
2012-04-22 20:54:29 +02:00
George Oikonomou
e95f94a9a8
Added support for reading MAC from the cc253x flash
...
We still use the primary location by default (Info Page) but
this is now configurable. This change is useful for users who
wish to specify their own MAC address. Since the Info Page is
read-only, they need to be able to use the secondary location
2012-04-20 16:03:38 +01:00
George Oikonomou
29090a3dda
The cc253x Makefile specifies SoC flavor
...
This will help us slowly add better support for smaller SoCs
instead of just assuming that all cc253x SoCs are F256
- We build for F256 by default but the project Makefile can override this
- We currently ignore this when passing --code-size. This is a ToDo
- The bank allocator always assumes 7 banks. Once we fix --code-size above this will be irrelevant
2012-04-20 16:03:38 +01:00
George Oikonomou
6fb48174ba
Fixed a documentation typo
2012-04-20 16:03:37 +01:00
Niclas Finne
1b13b69814
Added support for mspgcc 4.6+ that no longer supports generic MCU identifiers such as msp430x1611
2012-04-10 16:05:10 +02:00
Niclas Finne
57a166c3db
Corrected compiler flags for the IAR compiler
2012-04-10 15:27:44 +02:00
David Kopf
cac4e9a222
Add clock_delay_us and clock_set_seconds to clock.h. Modify clock_wait to use clock_time_t.
...
Remove the troublesome avr/dev/delay.* files.
Add PLATFORM_NAME and combine the confusing *_REVISION defines into a single PLATFORM_TYPE
2012-04-09 15:49:53 -04:00
David Kopf
40bd020394
Fix wrong register addresses.
2012-04-09 09:58:12 -04:00
George Oikonomou
57969259ce
cc2x3x clock_delay(len) now delays for approx. len usecs
2012-04-03 16:26:11 +01:00
George Oikonomou
3cb26adeda
Added an ASM(foo) macro for cc243x
2012-04-03 16:26:11 +01:00
George Oikonomou
242e02658f
The cc2530 UART driver was sending a 0 down the line on init
2012-04-03 16:26:10 +01:00
George Oikonomou
b3de052e01
Ported the stack-friendly clock ISR code over from cc243x to cc253x
2012-04-03 16:26:10 +01:00
George Oikonomou
11a7f644ac
Comment rewording and formatting
2012-04-03 16:26:10 +01:00
George Oikonomou
ce17fa131c
Stack-friendly cc243x clock ISR enabled by default
...
This new approach (CLOCK_CONF_ACCURATE=0) was not as inaccurate
as originally thought. In fact, it has pretty much the same
accuracy as the old, stack-hungry version.
* Renamed the define from CLOCK_CONF_ACCURATE (1: old) to
CLOCK_CONF_STACK_FRIENDLY (1: new) to stop implying
that one is more accurate than the other.
* Using CLOCK_CONF_STACK_FRIENDLY by default.
2012-04-03 16:26:10 +01:00
George Oikonomou
924fe934c1
Deleted obsolete macros. Minor formatting
2012-04-03 16:26:10 +01:00
George Oikonomou
ffa3a1c4c3
cc2x3x clock driver cleanup
...
* Bit-Addressable SFRs are now accessed as such,
instead of (N)OR-ing the byte
* A routine was declared as CCIF but not defined as such. Fixed
* Deleted a leftover duplicate define
* Formatting
* Comment updates and clarifications
2012-04-03 16:26:10 +01:00
simonduq
930c7c25bc
fixes in mb851 and stm32w108: erroneous linking with mpu.o, conf file,
...
more printouts in main when ipv6 is used, and a target for memory
profiling taking stm's gnu.ld static stack size into account
2012-04-03 11:47:30 +02:00
George Oikonomou
5240519dd9
Renamed a config define to better match contiki's naming philosophy
2012-04-02 11:38:54 +01:00
George Oikonomou
bce34e4b9a
For cc2x30, moved CLOCK_CONF_SENCOND to the cpu dir.
...
The value is not really configurable by the platform so having it
in contiki-conf.h didn't make huge sense.
2012-04-02 11:22:19 +01:00
George Oikonomou
d958ee3125
Deleted the old Sensinode 'read mac from flash' routine.
...
Since the introduction of a purpose-written routine, the old
generic one (which was written in asm) was never being used.
There was a configuration directive which allowed us to switch
between the two. All references to this configuration directive
have also been removed.
2012-04-02 11:21:32 +01:00
George Oikonomou
5d8f63a61b
We've not been using the cc2430 converter for a while now
2012-04-02 11:03:49 +01:00
George Oikonomou
7854ee499a
Wrapped cc2x30 SOFT_RESET() macro inside do {...} while(0)
2012-03-29 13:11:04 +01:00
George Oikonomou
5afdd19403
Adjusted check to determine if we are being built with SDCC
...
Since rev #7342 , SDCC defines __SDCC_mcs51 instead of SDCC_mcs51.
We check for either
2012-03-29 13:10:25 +01:00
George Oikonomou
4f1e251603
Some uN_t had crept back in cc2530dk and sensinode.
...
Changed to uintN_t plus a bit of code formatting
2012-03-29 13:10:10 +01:00
simonduq
946f00bf7b
stm32w: added ability to upload and reset all connected boards, and login using MOTE=x
2012-03-26 23:00:44 +02:00
simonduq
95ae5c5d51
avoid unnecessary symbols.c/h copying
2012-03-26 23:00:43 +02:00
George Oikonomou
ad256e5014
New platform: TI cc2530 Development Kit
...
This commits adds support for TI's SmartRF05 Eval. Board with cc2530 EMs
Some initial support for cc2531 USB dongles
2012-03-23 14:41:07 +00:00
George Oikonomou
b7674c3636
Reincarnate the sensinode/cc2430 port
2012-03-23 14:41:07 +00:00
simonduq
e4fb360262
stm32w platforms: contikimac support in the Rime case, with EUI-64
2012-03-20 17:30:59 +01:00
simonduq
5da4463236
adding ducy cycling support to the stm32w-based platforms (patch by Chi-Anh La)
2012-03-20 17:29:58 +01:00
Niclas Finne
ff7a977dc7
Improved support for the IAR compiler for the MSP430 platforms
2012-03-07 23:09:05 +01:00
Niclas Finne
684c3edfa6
Cross compiler interrupt service routine compatibility definitions for MSP430 based platforms based on isr_compat.h by Steve Underwood.
2012-03-07 23:04:52 +01:00
Niclas Finne
2eee14a1d8
Allow compiler flag SMALL to be set to disable SMALL-build. Patch by Andre Frimberger.
2012-03-06 15:35:20 +01:00
Ilya Dmitrichenko
49cd7878e3
Avoid deprecated error on Darwin.
2012-03-02 15:15:47 -05:00
Ilya Dmitrichenko
499d3052ee
Fixed TARGET=native compilation issues on Darwin.
2012-03-02 15:15:42 -05:00
David Kopf
2b7ecefce7
Remove unused SPI initializer flag from AVR. Comment out in the msp-430 template.
2012-02-27 17:05:22 -05:00
Ilya Dmitrichenko
9c99d46e24
Simplified host OS platform detection in Makefiles
2012-02-25 10:09:33 -05:00
David Kopf
deb75d3d97
Several bugfixes
2012-02-21 11:14:52 -05:00
David Kopf
59e459e0e9
Add missing mtarch_stop function
2012-02-21 11:11:53 -05:00
David Kopf
6e45dfe5ff
PROGMEM changes needed for newer avr-gcc compiler
2012-02-21 11:10:57 -05:00
Nicholas J Humfrey
1cda3da17e
Converted u8_t to uint8_t and u16_t to uint16_t in the cpu directory.
2012-02-21 08:33:24 -05:00
Mariano Alvira
68591919e6
mc1322x: add -MMD to Makefile.mc1322x to correctly create dependencies
2012-02-16 11:17:15 -05:00
Mariano Alvira
43062b6d74
mc1322x: change how board.h works to allow default board.h (defaults
...
to econotag)
2012-02-13 10:01:36 -05:00
Mariano Alvira
ee8f2c669e
mc1322x: remove symbols.{c,h}
2012-02-13 10:01:36 -05:00
David Kopf
9d6542d49b
Fix minimal-net webserver6, broken after native border router changes.
2012-02-11 15:03:24 -05:00
David Kopf
38267bfd5a
Webserver-nano: Add page load times, remove workaround code for bug in arm strformat.c, correct the double count of leading zeros there.
2012-02-11 14:58:35 -05:00
David Kopf
987906be97
rf230bb updates: involves setting the 801.15.4 pending bit,
...
0x800000 cpu clock, and a jtag reset bugfix
2012-02-01 14:16:39 -07:00
Ivan Delamer
57e686179c
Improved rf230bb.c synchronization/locking. Removed unnecessary locks
...
during Tx (single-threaded environment). Added protection to Rx thread
from buffer access by ISR.
2012-02-01 13:37:45 -07:00
David Kopf
7ca141b457
Access uart registers directly instead of through intermediate addresses in a RAM struct.
...
Add a platform define to reduce the number of ports supported by the cpu.
2012-01-21 13:49:58 -05:00
Niclas Finne
f26920ae9b
Define the BV macro if not already defined
2012-01-11 08:46:16 +01:00
