Commit Graph

1942 Commits

Author SHA1 Message Date
Benoît Thébaudeau
0692ee251d cc2538: usb: Use the new LPM peripheral registration
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-15 17:14:45 +01:00
Benoît Thébaudeau
d35732505b cc2538: lpm: Add registration mechanism for peripherals
Some peripherals have their clocks automatically gated in PM1+ modes, so they
cannot operate. This new mechanism gives peripherals a way to prohibit PM1+
modes so that they can properly complete their current operations before
entering PM1+.

This mechanism is implemented with peripheral functions registered to the LPM
module. These functions return whether the associated peripheral permits or not
PM1+ modes. They are called by the LPM module each time PM1+ might be possible.
If any of the peripherals wants to block PM1+, then the system is only dropped
to PM0.

Partly from: George Oikonomou
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-15 17:09:22 +01:00
Adam Dunkels
f2f0540051 Merge pull request #331 from alessandrelli/msp430-gcc-4.7-flags-wismote
Add mspgcc 4.7.x flags to the wismote makefile
2013-11-14 12:30:47 -08:00
George Oikonomou
2893af5e5d Document alternative toolchain for the CC2538DK 2013-11-14 12:22:21 +00:00
Adam Dunkels
df2d2f53c2 Merge pull request #407 from cmorty/submodule
Add submodule support for MSPSim and get Travis green again.
2013-11-14 03:22:03 -08:00
Oliver Schmidt
2d7d1b123d Added 6502 driver for WIZnet W5100 in MACRAW mode. 2013-11-09 23:15:20 +01:00
Moritz 'Morty' Strübe
c67c048cac Clean up setting channel and CCA-threshold for CC2420 based motes.
The CCA-threshold now defaults to -46 which give better simulation
results and typically also better experimental results.
This adjustment is also needed due to commit 0a13f99 in mspsim. As
promised in https://github.com/mspsim/mspsim/pull/18 it broke the
regression tests.
2013-11-07 17:28:33 +01:00
Oliver Schmidt
c6474cc8bc Final adjustments for the switch from 'atari' to 'atarixl'. 2013-10-06 17:23:39 +02:00
Oliver Schmidt
37b66bac5a Finetuned Atari XL memory layout.
The Telent server includes both uIP logging and uIP client functionality. Therefore uip.o is somewhat larger.
2013-10-05 23:51:49 +02:00
Oliver Schmidt
57d9c43a33 Removed support for 'atari' now that 'atarixl' is part of the cc65 master. 2013-10-03 22:55:32 +02:00
Oliver Schmidt
149f3834e6 Adjusted Makefile to the final 'atarixl' cc65 target.
- Assign source files to the splitted shadow RAM areas.
- Switched to dynamic Ethernet driver loading.
2013-10-03 22:40:25 +02:00
George Oikonomou
2957d44ff8 Merge pull request #352 from lab11/cc2538-spi-driver
Added SPI driver for CC2538
2013-09-28 13:25:17 -07:00
Brad Campbell
e2af903d05 Added SPI driver for CC2538
This uses the core/dev/spi.h header and implements the spi_init()
function and the various macros for SPI operation. ssi.h contains all of
the register locations and information.

This implementation is not very versatile, mostly because I don't how to
make it flexible in the contiki system. It supports pin muxing for the
four spi pins, but other than that picks sensible defaults.

The SPI macros (like SPI_READ()) are defined in
cpu/cc2538/spi-arch.h. In order to use the SPI driver, add the following
includes to your project:

    #include "spi-arch.h
    #include "dev/spi.h"
2013-09-27 17:46:15 -04:00
Brad Campbell
766fc5a174 Add conf checks to CC2538dk conf file
Allows for specific apps to control more settings of the platform.
2013-09-11 21:43:13 -04:00
Oliver Schmidt
17bbded894 Allow text screen memory to be aligned to 0x2000. 2013-09-10 20:59:19 +02:00
Oliver Schmidt
6fc83cf601 Initialize tcpip process before resolver process.
Since introduction of mDNS (f145c17039)
the resolver process initialization depends on the tcpip process
already being initialized (because of the call to udp_new()).
2013-09-01 20:53:51 +02:00
Simon Duquennoy
248301a041 Fix naming issues and includes in uip-ds6-nbr.h 2013-08-19 17:48:30 +02:00
Simon Duquennoy
5dc05e7913 Port apps, examples, platforms and tools so they use the new neighbor and route API. 2013-08-19 17:48:30 +02:00
Simon Duquennoy
ff093a2b50 Removed now unused per-module neighbor table size configs. Use NEIGHBOR_CONF_MAX_NEIGHBORS instead. 2013-08-19 17:48:30 +02:00
Fredrik Osterlind
150807f2e6 removed rpl configuration, instead using contiki default values 2013-08-16 15:06:31 +02:00
Fredrik Osterlind
8041f66d8c link-layer acks support for cooja motes 2013-08-15 14:32:35 +02:00
Fredrik Osterlind
3caf1bfab4 cooja motes rimestats 2013-08-15 11:56:12 +02:00
Daniele Alessandrelli
e82d201ca5 Added mspgcc 4.7.x flags to the Wismote makefile 2013-08-12 16:37:45 +02:00
Nicolas Tsiftes
7987a6dac7 Merge pull request #328 from g-oikonomou/cc2538-uart-config
Make the CC2538 UART driver more configurable
2013-08-09 10:20:36 -07:00
George Oikonomou
4f1485e238 Remove the second 6LoWPAN context from Sensinode
This context was once used in an in-house testbed
and is not required upstream
2013-08-09 16:38:12 +01:00
George Oikonomou
f30d92b101 Change the way we switch between cc2530 models
The switch is now performed through a configuration define,
which has also been renamed to better match Contiki's naming
conventions
2013-08-09 15:53:23 +01:00
George Oikonomou
1b0470687b Change the cc2531 usb stick descriptor
The CC2531 USB stick now identifies itself as a
'Texas Instruments CC2531 USB Dongle' and uses a
TI-assigmed VID:PID. The VID:PID is now configurable
in contiki- or project-conf.h
2013-08-09 15:51:58 +01:00
George Oikonomou
0614c4e720 No longer build rpl-of0 for Sensinodes 2013-08-09 15:50:47 +01:00
George Oikonomou
6a79ac3b2d Increase 8051 plaform configurability 2013-08-09 15:50:47 +01:00
George Oikonomou
70d8bd71df Disable example-defined putchar for 8051 platforms 2013-08-09 15:50:47 +01:00
George Oikonomou
ecf8ca55ef Move SLIP interface define to project-conf 2013-08-09 15:50:47 +01:00
George Oikonomou
fa166116b7 Auto-enable SLIP for 8051-based platforms 2013-08-09 15:50:47 +01:00
George Oikonomou
0a7094bc39 Remove leftover make targets
The sensinode platform does not support .upload and .serialdump
Their presence in the makefile has confused in the past confused
some users. This commit removes them

The commit also removes the $(OBJECTDIR)/%.rel: %.cS recipe which
is not used by either 8051 platform and is probably broken anyway,
since it has been unmaintained for years
2013-08-09 15:48:05 +01:00
George Oikonomou
6c6013b898 Make the CC2538 UART driver more configurable
* We can now very easily switch between UART0 and UART1 through a define
* We can also configure the UART RX and TX port/pin through defines
2013-08-09 12:20:25 +01:00
Adam Dunkels
70eb439a88 Merge pull request #325 from g-oikonomou/cc2538-tools-release
CC2538 IEEE address and README updates
2013-08-07 08:25:30 -07:00
George Oikonomou
81318909e0 Read IEEE address from InfoPage by default 2013-08-07 15:28:33 +01:00
George Oikonomou
6b01b36cc9 Update readme references and tool download URLs 2013-08-07 15:28:04 +01:00
George Oikonomou
64c16d4be1 Adjust a config define to its new name 2013-08-07 15:27:19 +01:00
Adam Dunkels
99c331382b Turn off the LCD by default as it is somewhat flaky 2013-08-06 21:33:03 +02:00
Adam Dunkels
e147c63044 Added mspgcc 4.7.x flags 2013-08-06 21:33:03 +02:00
Oliver Schmidt
6ab336f55f Several minor consistency improvements. 2013-07-31 00:55:31 +02:00
Oliver Schmidt
8d23d1b0bb Support the recently added verbosity control. 2013-07-31 00:15:38 +02:00
Oliver Schmidt
3cda787264 Be consistent with tab chars in Makefiles. 2013-07-30 23:39:02 +02:00
Adam Dunkels
54f2109134 Merge pull request #290 from simonduq/rpl-mrhof-etx-nomc
Update of RPL MRHOF (use no metric container with ETX [RFC6719])
2013-07-29 00:56:25 -07:00
Mariano Alvira
5d19de3dbf Merge pull request #266 from ismb-pert/fix-mbxxx
mb851 platform is now the more generic mbxxx. STM32W_CPUREV environment variable is used to select the variant of STM32W to use.
2013-07-26 07:38:11 -07:00
Nicolas Tsiftes
8f5941a4c9 Merge pull request #253 from JelmerT/feature-z1-tlc59116
TLC59116 I2C led driver for Zolertia Z1
2013-07-23 11:09:02 -07:00
Simon Duquennoy
defcc639ce Use no metric container when having MRHOF with ETX, as specified in RFC6719. Renamed rpl-of-etx to rpl-mrhof. 2013-07-23 19:36:38 +02:00
stefano pascali
36e7db42de Some little refactor 2013-07-19 16:15:55 +02:00
stefano pascali
b43ce0f677 Travis-ci tweaks, added CPUREV to 01 regression test, needed by mbxxx platform 2013-07-12 17:07:04 +02:00
stefano pascali
fcb09d5d30 Fixed mbxxx platform 2013-07-11 17:56:17 +02:00