85 Commits

Author	SHA1	Message	Date
nvt-se	f0891be218	added clear channel assessment timeout. long to begin with.	2007-12-20 14:44:31 +00:00
fros4943	d8f6f03edc	moving radio init to init-net files	2007-12-20 13:43:24 +00:00
fros4943	d0997c2dab	major bugfix: padding synch with zero	2007-12-20 13:36:59 +00:00
nvt-se	abb2731ed7	corrected comparison when bits don't need shifting.	2007-12-20 10:48:01 +00:00
nvt-se	7a6a9e62e4	improved logic.	2007-12-19 13:25:41 +00:00
nvt-se	1f00c20815	state variable must be volatile.	2007-12-19 13:09:01 +00:00
nvt-se	b4a8641dda	removed printf's.	2007-12-18 15:27:43 +00:00
nvt-se	f9d24f0d24	Wake up from sleep in the interrupt when the receiver process is going ... to be polled.	2007-12-18 15:26:25 +00:00
fros4943	d21572da02	configurable port	2007-12-18 11:55:01 +00:00
nvt-se	ab115e4b10	Removed deprecated function.	2007-12-17 20:18:29 +00:00
nvt-se	1566f55e04	use smaller payload buffer size and provision for synchronization word in ... the total buffer.	2007-12-17 20:15:53 +00:00
nvt-se	bcefffb0e7	set ev to valid value.	2007-12-17 18:48:50 +00:00
nvt-se	004143b6b8	set rxlen to zero before enabling interrupts.	2007-12-17 16:37:15 +00:00
nvt-se	2288cdecbb	small cleanup.	2007-12-17 16:23:32 +00:00
nvt-se	2d5f331b34	new line.	2007-12-17 16:20:34 +00:00
fros4943	479d74ce6a	added receiver process outside interrupt	2007-12-17 15:53:57 +00:00
fros4943	7886d51045	removed old dma_init	2007-12-17 15:47:55 +00:00
fros4943	3936e0c275	updated version	2007-12-17 15:47:40 +00:00
nvt-se	5f1ca4ccdf	use synchronous transmission.	2007-12-17 15:26:47 +00:00
nvt-se	2a0351afb4	improved uip support and cleaned up the source.	2007-12-17 13:33:09 +00:00
nvt-se	86ce511469	Separate files for network initialization.	2007-12-17 13:20:54 +00:00
fros4943	4da695ce72	bugfix: adding cc1020_init again, node hangs at cc1020_on (calib) otherwise	2007-12-17 11:23:57 +00:00
nvt-se	6a42706847	removed duplicate.	2007-12-17 11:15:21 +00:00
nvt-se	a305e3ccbb	removed lpm_on.	2007-12-17 11:14:28 +00:00
fros4943	3969ea6f9d	not using usb port to program the msb	2007-12-17 11:10:45 +00:00
nvt-se	54bef4bea3	added back initializations that were missing in the previous commit.	2007-12-13 13:10:02 +00:00
nvt-se	665c58fd2a	Contributions from Michael Baar: ... CC1020 o Turns off only after transmission has ended and not in between o Using events for DMA takes too long. It should use a callback when DMA finishes to turn off the transmit mode as early as possible. Core/UART o Added profiling and energest initialization o Changed low-power mode from LPM1 to LPM3	2007-12-13 12:51:38 +00:00
nvt-se	b1d87bf0d3	Removed deprecated rules.	2007-12-13 11:29:12 +00:00
nvt-se	486ea95b4f	Limited support for energy estimation.	2007-12-10 12:49:08 +00:00
nvt-se	46b6ce9193	Conform to the radio_driver interface.	2007-11-18 12:25:22 +00:00
nvt-se	c90a758ac5	Detect if the medium is busy right before sending.	2007-11-12 21:17:47 +00:00
nvt-se	0e4429068b	Added a carrier sensing function.	2007-11-07 15:34:41 +00:00
nvt-se	ee59f1fe34	Use a fresh RSSI value in the read function.	2007-11-07 15:26:00 +00:00
nvt-se	a604013a88	Added more flags for the status register.	2007-11-07 15:23:35 +00:00
nvt-se	366d845336	DMA destination is now given as a parameter instead of being hardwired.	2007-11-06 15:08:55 +00:00
nvt-se	dc8b6e7dcd	Removed some unused headers and definitions.	2007-11-06 14:48:18 +00:00
nvt-se	882f340f17	Use a counter for the test so lost packets are spotted easily.	2007-11-06 14:44:42 +00:00
nvt-se	e7dc3ec422	Initialize ctimer.	2007-10-24 13:47:50 +00:00
nvt-se	e57310c0b3	Removed duplicated statement.	2007-10-22 13:07:00 +00:00
nvt-se	06f923e502	Simple test for the SHT11 driver.	2007-10-22 13:05:30 +00:00
nvt-se	91b79de654	Use sht11 driver.	2007-10-22 12:21:20 +00:00
nvt-se	045225fa05	Made driver less platform-dependent and added support for msb-430.	2007-10-22 12:19:58 +00:00
nvt-se	2d0225b0e4	Safeguard for invalid packets.	2007-10-04 10:02:08 +00:00
nvt-se	fb9b800c53	More clear power down procedure. Now it is required that cc1020_on ... is called before anyone can send after the power down.	2007-10-02 14:05:45 +00:00
nvt-se	4e8bdb1c08	Power managment is handled by another layer.	2007-10-01 11:59:36 +00:00
nvt-se	c0686e80f1	Added definitions for the MAIN register.	2007-10-01 11:56:49 +00:00
nvt-se	b72c228379	* Enable rtimers. ... * Specify port direction first.	2007-09-21 14:53:36 +00:00
nvt-se	24ffa8cfaf	support third DMA line.	2007-09-21 13:51:09 +00:00
nvt-se	bbecdd9c34	removed uncommented line.	2007-09-14 19:27:22 +00:00
nvt-se	87018b2af5	use uint16_t to be specific about id type size.	2007-09-14 19:24:45 +00:00