nifi
9bf0dff605
Compile using . instead of separate make rules for .firmware
2008-12-16 13:54:25 +00:00
joxe
23b7db88d5
moved rtimer from TimerB to TimerA so that TimerB subsystem is free for other uses
2008-12-02 12:44:48 +00:00
nifi
2013c4fece
Simulator for MSP430-based platforms
2008-11-24 11:09:36 +00:00
fros4943
1fbcfde0d6
implemented support for data argument when starting threads:
...
given function is called from a wrapper instead of immediately returned to via the stack
2008-11-21 10:28:32 +00:00
nifi
49f57b7848
changed to use unsigned long for seconds counter
2008-10-10 12:36:58 +00:00
joxe
8748230ead
changed usart code to handle LPM3
2008-09-18 17:59:27 +00:00
fros4943
b90075ea0a
bug fix, msp430 hw bug (undocumented):
...
when in continuous/compare mode the interrupt handler may get called before CCR==TR.
behavior observed when the timer is toggled between STOP/CONT in an external interrupt handler (serial input).
possibly this problem may also affect watchdog timer/timer B
2008-09-16 12:00:48 +00:00
fros4943
3ec170cdf5
added empty mtarch_stop()
2008-08-27 13:10:29 +00:00
adamdunkels
fc6d059d24
Added a clock_seconds() function prototype to core/sys/clock.h, that returns seconds in 32 bit format. On platforms like the MSP430, which has a 16 bit native datatype, this cannot be implemented with an interrupt tick that increments a 32 bit value because access is not atomic. Instead, the MSP430 code increments 16 bit seconds value and converts this into a 32 bit value through an offset calculation. If the new value is smaller than the last check, the offset is incremented by 65536. This change also means that CLOCK_CONF_SECOND must be a power of two because a modulo operation is used inside the periodic tick interrupt handler.
2008-07-07 23:38:09 +00:00
adamdunkels
62b7ef5173
Moved energest from lib/ to sys/
2008-07-04 00:02:21 +00:00
adamdunkels
64b6663b11
moved energest from lib/ to sys/
2008-07-03 23:59:20 +00:00
adamdunkels
7c459c849d
The .ihex file use the intermediate Contiki-wide .$(TARGET) target instead of the MSP430-specific .firmware
2008-07-02 14:11:34 +00:00
adamdunkels
66876625d4
Changed name of the simple-cc2420 module to cc2420: changed all function names and variable names from simple_cc2420_* to cc2420_*.
2008-07-02 09:05:40 +00:00
adamdunkels
1586d8f36f
Changed filename of the CC2420 driver from simple-cc2420 to cc2420.
2008-07-01 21:02:51 +00:00
adamdunkels
2569a8fc69
Removed unused file
2008-07-01 20:59:44 +00:00
joxe
57dedee38f
enabled ADC IRQs if ADC sensors active
2008-04-25 15:53:55 +00:00
adamdunkels
da49b950d4
Count the number of times the watchdog has been stopped to avoid starting it when someone else has stopped it
2008-02-11 10:45:19 +00:00
adamdunkels
660b7f9a78
Initialize watchdog instead of stopping and starting it
2008-02-11 10:44:49 +00:00
adamdunkels
cf5ff2bbb2
Made SLIP code coexist with ordinary serial code. If WITH_UIP=1, the SLIP code is used instead.
2008-02-03 20:59:35 +00:00
adamdunkels
e68d669265
Added improvements suggested by Hardy Greich: define CPU speed in one place only (contiki-conf.h), added nop to XTAL settlement delay
2008-02-03 20:58:11 +00:00
adamdunkels
a4d5ca833c
Update the periodic watchdog only if it is not stopped
2008-01-21 10:39:23 +00:00
adamdunkels
e16b7ffcf0
Changed the return value of the inpt handler function to int so that it can wake up the CPU from LPM
2008-01-08 08:04:09 +00:00
adamdunkels
7f05b8a5ef
Added a reboot function
2008-01-08 08:03:02 +00:00
adamdunkels
b50d2b02ee
Reformatting to comply with code style
2008-01-08 08:01:41 +00:00
adamdunkels
345d0a8a79
Added a WERROR definition that can be used to turn -Werror on
2008-01-08 08:01:01 +00:00
adamdunkels
6e0e6e1279
Removed -Werror since LPM*_EXIT; and friends trigger an internal mspgcc compiler error
2007-11-26 23:23:20 +00:00
joxe
a4985fd1f7
removed offset in rtimer_arch
2007-11-19 22:38:57 +00:00
adamdunkels
2132462716
Updated to use the watchdog API
2007-11-17 10:28:04 +00:00
adamdunkels
19b7bd9217
Fixed watchdog support for the MSP430. It now works as intended
2007-11-17 10:16:48 +00:00
adamdunkels
22cb35e9f6
Added -Werror to turn compiler warnings into errors to ensure that code always compile without warnings
2007-11-17 10:11:58 +00:00
adamdunkels
f192211444
Added a hack function called clock_counter() to make the current prototype profiling code run on the MSP430 platform
2007-11-12 21:07:39 +00:00
adamdunkels
585f00a804
Removed old codeprop-tmp.c
2007-11-06 20:35:42 +00:00
joxe
7fe87db86a
fixed some timer interrupt bugs and reimplemented clock_fine to avoid disabling interrupts
2007-10-04 20:45:29 +00:00
fros4943
5f63995265
support for delayed interrupts
...
earlier TACCR1 could be set to already passed time if timer A interrupts was delayed
2007-10-04 14:14:58 +00:00
nvt-se
1d4db3e2cc
The function was missing the case when the stack was used completely,
...
and didn't return a value then.
2007-09-14 20:21:01 +00:00
nvt-se
b4f3ab5af7
Added support for configurable callbacks of uart1 input.
2007-09-06 11:45:08 +00:00
joxe
aaae9f4cf8
removed redundant code - configuration of basic clock subsystem in clock and rtimer_arch
2007-09-03 19:22:37 +00:00
bg-
dcafdfe51a
* Standard defines for MSP430.
2007-08-16 13:09:06 +00:00
adamdunkels
2c53a38075
Architecture dependent code for the CC2420 driver
2007-05-25 08:07:54 +00:00
adamdunkels
00b1e371cf
Added energy estimation, disabled IRQs for A/D converting as it used close to 100% CPU time
2007-05-22 21:01:32 +00:00
adamdunkels
3872d004bc
Reading timer now quicker, embryo for possible future drift configuration
2007-05-22 21:00:09 +00:00
adamdunkels
432d242a3c
Added energy estimation, embryo for possible future drift configuration
2007-05-22 20:59:47 +00:00
adamdunkels
9a5bac6282
Added energy estimation
2007-05-22 20:59:11 +00:00
bg-
3f4ec3cf44
* Use _end rather than nonstandard __bss_end.
2007-05-21 15:29:46 +00:00
oliverschmidt
ae2073cac9
Factored out setup directory search path for source files into Makefile.include.
...
- All compilers used support the -I option for setting an include search directory.
- The Contiki source tree follows the (common) approach of placing declarations (in headerf iles) in the same directory as definitions (in source files).
As a result it makes sense to use the -I compiler option for just the same set of directories used for the vpath gnumake directive.
Note: I checked several builds but nevertheless one or the other might need some additional adjustsments. Sorry for the inconvenience.
2007-05-19 07:54:53 +00:00
adamdunkels
4364a9929a
Removed WITH_UIP
2007-05-15 08:09:45 +00:00
oliverschmidt
237b1617b5
Factored out setup directory search path for source files into Makefile.include.
...
- Search target specific directories before CPU specific directories.
- Search CPU specific directories before generic directories.
Note: I checked several builds but nevertheless one or the other might need some additional adjustsments. Sorry for the inconvenience.
2007-05-13 08:41:11 +00:00
adamdunkels
b2b750e83b
rtimer_arch_now() now returns the correct value
2007-04-07 05:45:08 +00:00
bg-
8aa34f1ea4
* remove author.
2007-04-04 11:53:07 +00:00
adamdunkels
08d825c450
Added rtimer-arch.c
2007-04-03 19:05:13 +00:00
