contiki/platform/galileo/drivers/gpio-pcal9535a.c
2015-12-21 08:06:14 -02:00

358 lines
9.2 KiB
C

/*
* Copyright (C) 2015, Intel Corporation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "contiki.h"
#include "gpio.h"
#include "gpio-pcal9535a.h"
#include "i2c.h"
#include "stdio.h"
#define REG_INPUT_PORT0 0x00
#define REG_INPUT_PORT1 0x01
#define REG_OUTPUT_PORT0 0x02
#define REG_OUTPUT_PORT1 0x03
#define REG_POL_INV_PORT0 0x04
#define REG_POL_INV_PORT1 0x05
#define REG_CONF_PORT0 0x06
#define REG_CONG_PORT1 0x07
#define REG_OUT_DRV_STRENGTH_PORT0_L 0x40
#define REG_OUT_DRV_STRENGTH_PORT0_H 0x41
#define REG_OUT_DRV_STRENGTH_PORT1_L 0x42
#define REG_OUT_DRV_STRENGTH_PORT1_H 0x43
#define REG_INPUT_LATCH_PORT0 0x44
#define REG_INPUT_LATCH_PORT1 0x45
#define REG_PUD_EN_PORT0 0x46
#define REG_PUD_EN_PORT1 0x47
#define REG_PUD_SEL_PORT0 0x48
#define REG_PUD_SEL_PORT1 0x49
#define REG_INT_MASK_PORT0 0x4A
#define REG_INT_MASK_PORT1 0x4B
#define REG_INT_STATUS_PORT0 0x4C
#define REG_INT_STATUS_PORT1 0x4D
#define REG_OUTPUT_PORT_CONF 0x4F
#define READ_PORT_TIMEOUT (CLOCK_SECOND / 100)
#define READ_PORT_TRIES 5
static int
read_port_regs(struct gpio_pcal9535a_data *data, uint8_t reg, union gpio_pcal9535a_port_data *buf)
{
int r;
uint8_t tries = READ_PORT_TRIES;
buf->byte[0] = reg;
buf->byte[1] = 0;
if(quarkX1000_i2c_write(buf->byte, 1, data->i2c_slave_addr) < 0) {
return -1;
}
do {
clock_wait(READ_PORT_TIMEOUT);
r = quarkX1000_i2c_read(buf->byte, 2, data->i2c_slave_addr);
if(r == 0) {
break;
}
} while(tries--);
if(r < 0) {
return -1;
}
return 0;
}
static int
write_port_regs(struct gpio_pcal9535a_data *data, uint8_t reg, union gpio_pcal9535a_port_data *buf)
{
uint8_t cmd[] = { reg, buf->byte[0], buf->byte[1] };
if(quarkX1000_i2c_polling_write(cmd, sizeof(cmd), data->i2c_slave_addr) < 0) {
return -1;
}
return 0;
}
static int
setup_pin_dir(struct gpio_pcal9535a_data *data, uint32_t pin, int flags)
{
union gpio_pcal9535a_port_data *port = &data->reg_cache.dir;
uint16_t bit_mask, new_value = 0;
bit_mask = 1 << pin;
if((flags & QUARKX1000_GPIO_DIR_MASK) == QUARKX1000_GPIO_IN) {
new_value = 1 << pin;
}
port->all &= ~bit_mask;
port->all |= new_value;
return write_port_regs(data, REG_CONF_PORT0, port);
}
static int
setup_pin_pullupdown(struct gpio_pcal9535a_data *data, uint32_t pin, int flags)
{
union gpio_pcal9535a_port_data *port;
uint16_t bit_mask, new_value = 0;
if((flags & QUARKX1000_GPIO_PUD_MASK) != QUARKX1000_GPIO_PUD_NORMAL) {
port = &data->reg_cache.pud_sel;
bit_mask = 1 << pin;
if((flags & QUARKX1000_GPIO_PUD_MASK) == QUARKX1000_GPIO_PUD_PULL_UP) {
new_value = 1 << pin;
}
port->all &= ~bit_mask;
port->all |= new_value;
if(write_port_regs(data, REG_PUD_SEL_PORT0, port) < 0) {
return -1;
}
}
port = &data->reg_cache.pud_en;
bit_mask = 1 << pin;
if((flags & QUARKX1000_GPIO_PUD_MASK) != QUARKX1000_GPIO_PUD_NORMAL) {
new_value = 1 << pin;
}
port->all &= ~bit_mask;
port->all |= new_value;
return write_port_regs(data, REG_PUD_EN_PORT0, port);
}
static int
setup_pin_polarity(struct gpio_pcal9535a_data *data, uint32_t pin, int flags)
{
union gpio_pcal9535a_port_data *port = &data->reg_cache.pol_inv;
uint16_t bit_mask, new_value = 0;
bit_mask = 1 << pin;
if((flags & QUARKX1000_GPIO_POL_MASK) == QUARKX1000_GPIO_POL_INV) {
new_value = 1 << pin;
}
port->all &= ~bit_mask;
port->all |= new_value;
if(write_port_regs(data, REG_POL_INV_PORT0, port) < 0) {
return -1;
}
data->out_pol_inv = port->all;
return 0;
}
int
gpio_pcal9535a_write(struct gpio_pcal9535a_data *data, uint32_t pin, uint32_t value)
{
union gpio_pcal9535a_port_data *port = &data->reg_cache.output;
uint16_t bit_mask, new_value;
if(!quarkX1000_i2c_is_available()) {
return -1;
}
bit_mask = 1 << pin;
new_value = (value << pin) & bit_mask;
new_value ^= (data->out_pol_inv & bit_mask);
new_value &= bit_mask;
port->all &= ~bit_mask;
port->all |= new_value;
return write_port_regs(data, REG_OUTPUT_PORT0, port);
}
int
gpio_pcal9535a_read(struct gpio_pcal9535a_data *data, uint32_t pin, uint32_t *value)
{
union gpio_pcal9535a_port_data buf;
if(!quarkX1000_i2c_is_available()) {
return -1;
}
if(read_port_regs(data, REG_INPUT_PORT0, &buf) < 0) {
return -1;
}
*value = (buf.all >> pin) & 0x01;
return 0;
}
int
gpio_pcal9535a_config(struct gpio_pcal9535a_data *data, uint32_t pin, int flags)
{
if(!quarkX1000_i2c_is_available()) {
return -1;
}
if(setup_pin_dir(data, pin, flags) < 0) {
return -1;
}
if(setup_pin_polarity(data, pin, flags) < 0) {
return -1;
}
if(setup_pin_pullupdown(data, pin, flags) < 0) {
return -1;
}
return 0;
}
static int
setup_port_dir(struct gpio_pcal9535a_data *data, uint32_t pin, int flags)
{
union gpio_pcal9535a_port_data *port = &data->reg_cache.dir;
port->all = ((flags & QUARKX1000_GPIO_DIR_MASK) == QUARKX1000_GPIO_IN) ? 0xFFFF : 0x0;
return write_port_regs(data, REG_CONF_PORT0, port);
}
static int
setup_port_pullupdown(struct gpio_pcal9535a_data *data, uint32_t pin, int flags)
{
union gpio_pcal9535a_port_data *port;
if((flags & QUARKX1000_GPIO_PUD_MASK) != QUARKX1000_GPIO_PUD_NORMAL) {
port = &data->reg_cache.pud_sel;
port->all = ((flags & QUARKX1000_GPIO_PUD_MASK) == QUARKX1000_GPIO_PUD_PULL_UP) ? 0xFFFF : 0x0;
if(write_port_regs(data, REG_PUD_SEL_PORT0, port) < 0) {
return -1;
}
}
port = &data->reg_cache.pud_en;
port->all = ((flags & QUARKX1000_GPIO_PUD_MASK) != QUARKX1000_GPIO_PUD_NORMAL) ? 0xFFFF : 0x0;
return write_port_regs(data, REG_PUD_EN_PORT0, port);
}
static int
setup_port_polarity(struct gpio_pcal9535a_data *data, uint32_t pin, int flags)
{
union gpio_pcal9535a_port_data *port = &data->reg_cache.pol_inv;
port->all = ((flags & QUARKX1000_GPIO_POL_MASK) == QUARKX1000_GPIO_POL_INV) ? 0xFFFF : 0x0;
if(write_port_regs(data, REG_POL_INV_PORT0, port) < 0) {
return -1;
}
data->out_pol_inv = port->all;
return 0;
}
int
gpio_pcal9535a_write_port(struct gpio_pcal9535a_data *data, uint32_t pin, uint32_t value)
{
union gpio_pcal9535a_port_data *port = &data->reg_cache.output;
uint16_t bit_mask, new_value;
if(!quarkX1000_i2c_is_available()) {
return -1;
}
port->all = value;
bit_mask = data->out_pol_inv;
new_value = value & bit_mask;
new_value ^= data->out_pol_inv;
new_value &= bit_mask;
port->all &= ~bit_mask;
port->all |= new_value;
return write_port_regs(data, REG_OUTPUT_PORT0, port);
}
int
gpio_pcal9535a_read_port(struct gpio_pcal9535a_data *data, uint32_t pin, uint32_t *value)
{
union gpio_pcal9535a_port_data buf;
if(!quarkX1000_i2c_is_available()) {
return -1;
}
if(read_port_regs(data, REG_INPUT_PORT0, &buf) < 0) {
return -1;
}
*value = buf.all;
return 0;
}
int
gpio_pcal9535a_config_port(struct gpio_pcal9535a_data *data, uint32_t pin, int flags)
{
if(!quarkX1000_i2c_is_available()) {
return -1;
}
if(setup_port_dir(data, pin, flags) < 0) {
return -1;
}
if(setup_port_polarity(data, pin, flags) < 0) {
return -1;
}
if(setup_port_pullupdown(data, pin, flags) < 0) {
return -1;
}
return 0;
}
int
gpio_pcal9535a_init(struct gpio_pcal9535a_data *data, uint16_t i2c_slave_addr)
{
/* has to init after I2C master */
if(!quarkX1000_i2c_is_available()) {
return -1;
}
data->i2c_slave_addr = i2c_slave_addr;
/* default for registers according to datasheet */
data->reg_cache.output.all = 0xFFFF;
data->reg_cache.pol_inv.all = 0x0;
data->reg_cache.dir.all = 0xFFFF;
data->reg_cache.pud_en.all = 0x0;
data->reg_cache.pud_sel.all = 0xFFFF;
return 0;
}