contiki/platform/stm32nucleo-spirit1/spirit1-const.h
2015-10-09 19:40:39 +02:00

66 lines
3.4 KiB
C

/*
* Copyright (c) 2012, STMicroelectronics.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*
*/
/*---------------------------------------------------------------------------*/
#ifndef __SPIRIT1_CONST_H__
#define __SPIRIT1_CONST_H__
/*---------------------------------------------------------------------------*/
/* The state bitfield and values for different states, as read from MC_STATE[1:0] registers,
which are returned on any SPI read or write operation. */
#define SPIRIT1_STATE_STATEBITS (0x00FE)
/*---------------------------------------------------------------------------*/
#define SPIRIT1_STATE_STANDBY ((0x0040) << 1)
#define SPIRIT1_STATE_SLEEP ((0x0036) << 1)
#define SPIRIT1_STATE_READY ((0x0003) << 1)
#define SPIRIT1_STATE_LOCK ((0x000F) << 1)
#define SPIRIT1_STATE_RX ((0x0033) << 1)
#define SPIRIT1_STATE_TX ((0x005F) << 1)
/* NB the below states were extracted from ST drivers, but are not specified in the datasheet */
#define SPIRIT1_STATE_PM_SETUP ((0x003D) << 1)
#define SPIRIT1_STATE_XO_SETTLING ((0x0023) << 1)
#define SPIRIT1_STATE_SYNTH_SETUP ((0x0053) << 1)
#define SPIRIT1_STATE_PROTOCOL ((0x001F) << 1)
#define SPIRIT1_STATE_SYNTH_CALIBRATION ((0x004F) << 1)
/*---------------------------------------------------------------------------*/
/* strobe commands */
#define SPIRIT1_STROBE_TX 0x60
#define SPIRIT1_STROBE_RX 0x61
#define SPIRIT1_STROBE_READY 0x62
#define SPIRIT1_STROBE_STANDBY 0x63
#define SPIRIT1_STROBE_SLEEP 0x64
#define SPIRIT1_STROBE_SABORT 0x67
#define SPIRIT1_STROBE_SRES 0x70
#define SPIRIT1_STROBE_FRX 0x71
#define SPIRIT1_STROBE_FTX 0x72
/*---------------------------------------------------------------------------*/
#endif /* __SPIRIT1_CONST_H__ */
/*---------------------------------------------------------------------------*/