mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-12-23 01:29:33 +00:00
fb5d0b7ef0
So far 80 column display was an attribute of a cc65 platform. Now each cc65 application can ask for 80 column display by defining WITH_80COL. Of course this is ignored by platforms incapable of 80 column display. I see three types of application: * Applications not benefitting from 80 column at all and in fact looking better with 40 column display. These are now using 40 column display. Examples: ethconfig, ipconfig * Applications taking advantage of 80 column display if it is available without drawbacks. These stay as they were. Examples: Telnet server, web server, wget * Applications needing 80 column display so urgently that it is likely desirable even if the display becomes harder to read. These come now in both flavors allowing the user to choose. Examples: IRC, web browser Note: This change doesn't actually introduce any 80 column display with drawbacks. This if left to a subsequent change.
89 lines
2.9 KiB
Markdown
89 lines
2.9 KiB
Markdown
6502
|
|
====
|
|
|
|
The cpu/6502/ directory is used for targeting 6502-based machines using the
|
|
cc65 compiler [http://cc65.github.io/cc65/](http://cc65.github.io/cc65/).
|
|
|
|
The Contiki network configuration for 6502-based targets is loaded from a
|
|
binary configuration file (by default named contiki.cfg). It has the following
|
|
format:
|
|
|
|
- Bytes 1 - 4: IP Address (HiByte first)
|
|
- Bytes 5 - 8: Subnet Mask (HiByte first)
|
|
- Bytes 9 - 12: Default Router (HiByte first)
|
|
- Bytes 13 - 16: DNS Server (HiByte first)
|
|
- Bytes 17 - 18: Ethernet card I/O address (LoByte first !)
|
|
- Bytes 19 - xx: Ethernet card driver name (ASCII / PETSCII)
|
|
|
|
An online Contiki configuration file generator is available at two sites:
|
|
|
|
- [http://www.a2retrosystems.com/contiki.html](http://www.a2retrosystems.com/contiki.html)
|
|
- [http://contiki.cbm8bit.com](http://contiki.cbm8bit.com)
|
|
|
|
The build for 6502-based machines includes the 'disk' make goal which creates a
|
|
bootable floppy disk image containing the project binary, a sample
|
|
configuration file and the Ethernet card drivers.
|
|
|
|
The build for 6502-based machines supports so-called high-level configuration
|
|
macros which allow to customize Contiki on a per-project basis. They are set in
|
|
form of a comma-separated list as value of the make variable DEFINES on the
|
|
make command line. The value of DEFINES can be saved with the 'savedefines'
|
|
make goal. The values of the high-level configuration macros are not tracked by
|
|
the build so a manual rebuild is necessary on any change. The following
|
|
high-level configuration macros may be set:
|
|
|
|
- MTU_SIZE
|
|
- Default: 1500
|
|
- Purpose: Set the Maximum Transfer Unit size.
|
|
|
|
- CONNECTIONS
|
|
- Default: 2
|
|
- Purpose: Set the maximum number of concurrent TCP connections.
|
|
|
|
- ETHERNET
|
|
- Default: N/A
|
|
- Purpose: Link Ethernet driver statically instead of loading it dynamically
|
|
using the network configuration file.
|
|
|
|
- WITH_LOGGING
|
|
- Default: 0
|
|
- Purpose: Have log_message() and UIP_LOG() write messages to the screen.
|
|
|
|
- WITH_BOOST
|
|
- Default: 0
|
|
- Purpose: Significantly improve troughput on sending full sized packets by
|
|
splitting them thus workarounding the "delayed acknowledge".
|
|
|
|
- WITH_FORWARDING
|
|
- Default: 0
|
|
- Purpose: Enable support for the 'IP forwarding' packet driver.
|
|
|
|
- WITH_CLIENT
|
|
- Default: 0
|
|
- Purpose: Enable support for outgoing TCP connections.
|
|
|
|
- WITH_DNS
|
|
- Default: 0
|
|
- Purpose: Enable UDP support and initialize resolver process on startup.
|
|
|
|
- WITH_80COL
|
|
- Default: 0
|
|
- Purpose: Enable 80 column screen.
|
|
|
|
- WITH_GUI
|
|
- Default: 0
|
|
- Purpose: Initialize the CTK process on startup.
|
|
|
|
- WITH_MOUSE
|
|
- Default: 0
|
|
- Purpose: Enable CTK mouse support and load a mouse driver.
|
|
|
|
- WITH_ARGS
|
|
- Default: 0
|
|
- Purpose: Enable support for contiki_argc / contiki_argv.
|
|
|
|
- WITH_PFS
|
|
- Default: 0
|
|
- Purpose: Implement the CFS interface with a Platform-specific File System
|
|
instead of the POSIX file system.
|