contiki/examples/jn516x/tsch/simple-sensor-network
2016-04-13 07:54:46 -07:00
..
node llsec: Permit dynamic security levels 2016-04-13 07:54:46 -07:00
rpl-border-router Add examples for NXP JN516x using TSCH 2016-01-05 10:44:13 +01:00
script Add examples for NXP JN516x using TSCH 2015-12-17 13:29:42 +01:00
README.md Add examples for NXP JN516x using TSCH 2015-12-17 13:29:42 +01:00

This example shows a simple sensor network consisting of node(s),an rpl-border-router and a host connected to the IPv6 network. The nodes (see also node/README.md) regularly transmit simulated sensor data to the host. The host visualises the received data.

The Python script tools/Output-Visualisation.py visualises the received data from the nodes. The script runs on Python27 and uses gnuplot for visualisation. The following installations are needed (tested with Win32 versions:

  • Python 27 (https://www.python.org/download/releases/2.7/)

  • gnuplot (http://sourceforge.net/projects/gnuplot/files/gnuplot/)

  • gnuplot.py (http://gnuplot-py.sourceforge.net/)

  • numpy.py (e.g. http://www.lfd.uci.edu/~gohlke/pythonlibs/#numpy) Manual modification: Python27\Lib\site-packages\Gnuplot\gp_win32.py Modify gnuplot_command as in example below gnuplot_command = r'"C:\Program Files (x86)\gnuplot\bin\gnuplot.exe"'

  • The IPv6 addresses of nodes need to be entered in the dictionary "node_data" of tools/Output-Visualisation.py A user name for the node can be entered in this table as well.

  • The script will send a ping message to the next node in the list every 5 seconds. The nodes will obtain the IPv6 address from this message and start sending "sensor" data to the host.

  • Received sensor data is plotted. When no data has been received for more than 30seconds, the plot line will be dashed.

  • Plots are updated once per second.