contiki/examples/openmote-cc2538/test-sht21.c
2016-04-11 12:35:02 +02:00

93 lines
3.0 KiB
C

/*
* Copyright (c) 2014, OpenMote Technologies, S.L.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
*/
/**
* \addtogroup openmote-examples
* @{
*
* \defgroup openmote-sht21
*
* This example tests the correct functionality of the SHT21 temperature
* and humidity sensor using the I2C bus.
*
* @{
*
* \file
* Testing the SHT21 sensor on the OpenMote-CC2538 platform.
* \author
* Pere Tuset <peretuset@openmote.com>
*/
#include "contiki.h"
#include "dev/sht21.h"
#include "dev/leds.h"
#include "sys/etimer.h"
#include <stdio.h>
PROCESS(test_sht21_process, "SHT21 test");
AUTOSTART_PROCESSES(&test_sht21_process);
PROCESS_THREAD(test_sht21_process, ev, data)
{
static struct etimer et;
static unsigned raw;
static float temperature;
static float humidity;
PROCESS_BEGIN();
sht21_init();
if (!sht21_is_present()) {
leds_on(LEDS_ORANGE);
}
while(1) {
etimer_set(&et, CLOCK_SECOND);
PROCESS_YIELD();
if (ev == PROCESS_EVENT_TIMER) {
leds_on(LEDS_YELLOW);
raw = sht21_read_temperature();
temperature = sht21_convert_temperature(raw);
printf("Temperature: %u.%u degrees Celsius\n", (unsigned int) temperature, (unsigned int) (temperature * 100) % 100);
raw = sht21_read_humidity();
humidity = sht21_convert_humidity(raw);
printf("Rel. humidity: %u.%u%%\n", (unsigned int) humidity, (unsigned int) (humidity * 100) % 100);
leds_off(LEDS_YELLOW );
}
}
PROCESS_END();
}