mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-09-09 23:54:32 +00:00
This commit updates the srf06-cc26xx platform by adding support for the CC1310EM. We generalise the way this platform selects CPU/board so that we can easily add more combinations in the future. These changes have implication on how to build for different devices, so make sure to have a look at the updated README
335 lines
10 KiB
C
335 lines
10 KiB
C
/*
|
|
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the copyright holder nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
|
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \addtogroup sensortag-cc26xx-i2c
|
|
* @{
|
|
*
|
|
* \file
|
|
* Board-specific I2C driver for the Sensortag-CC26xx
|
|
*/
|
|
/*---------------------------------------------------------------------------*/
|
|
#include "contiki-conf.h"
|
|
#include "ti-lib.h"
|
|
#include "board-i2c.h"
|
|
#include "lpm.h"
|
|
|
|
#include <string.h>
|
|
#include <stdbool.h>
|
|
/*---------------------------------------------------------------------------*/
|
|
#define NO_INTERFACE 0xFF
|
|
/*---------------------------------------------------------------------------*/
|
|
static uint8_t slave_addr = 0x00;
|
|
static uint8_t interface = NO_INTERFACE;
|
|
/*---------------------------------------------------------------------------*/
|
|
static bool
|
|
accessible(void)
|
|
{
|
|
/* First, check the PD */
|
|
if(ti_lib_prcm_power_domain_status(PRCM_DOMAIN_SERIAL)
|
|
!= PRCM_DOMAIN_POWER_ON) {
|
|
return false;
|
|
}
|
|
|
|
/* Then check the 'run mode' clock gate */
|
|
if(!(HWREG(PRCM_BASE + PRCM_O_I2CCLKGR) & PRCM_I2CCLKGR_CLK_EN)) {
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
board_i2c_wakeup()
|
|
{
|
|
/* First, make sure the SERIAL PD is on */
|
|
ti_lib_prcm_power_domain_on(PRCM_DOMAIN_SERIAL);
|
|
while((ti_lib_prcm_power_domain_status(PRCM_DOMAIN_SERIAL)
|
|
!= PRCM_DOMAIN_POWER_ON));
|
|
|
|
/* Enable the clock to I2C */
|
|
ti_lib_prcm_peripheral_run_enable(PRCM_PERIPH_I2C0);
|
|
ti_lib_prcm_load_set();
|
|
while(!ti_lib_prcm_load_get());
|
|
|
|
/* Enable and initialize the I2C master module */
|
|
ti_lib_i2c_master_init_exp_clk(I2C0_BASE, ti_lib_sys_ctrl_clock_get(),
|
|
true);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static bool
|
|
i2c_status()
|
|
{
|
|
uint32_t status;
|
|
|
|
status = ti_lib_i2c_master_err(I2C0_BASE);
|
|
if(status & (I2C_MSTAT_DATACK_N_M | I2C_MSTAT_ADRACK_N_M)) {
|
|
ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_SEND_ERROR_STOP);
|
|
}
|
|
|
|
return status == I2C_MASTER_ERR_NONE;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
board_i2c_shutdown()
|
|
{
|
|
interface = NO_INTERFACE;
|
|
|
|
if(accessible()) {
|
|
ti_lib_i2c_master_disable(I2C0_BASE);
|
|
}
|
|
|
|
ti_lib_prcm_peripheral_run_disable(PRCM_PERIPH_I2C0);
|
|
ti_lib_prcm_load_set();
|
|
while(!ti_lib_prcm_load_get());
|
|
|
|
/*
|
|
* Set all pins to GPIO Input and disable the output driver. Set internal
|
|
* pull to match external pull
|
|
*
|
|
* SDA and SCL: external PU resistor
|
|
* SDA HP and SCL HP: MPU PWR low
|
|
*/
|
|
ti_lib_ioc_pin_type_gpio_input(BOARD_IOID_SDA_HP);
|
|
ti_lib_ioc_io_port_pull_set(BOARD_IOID_SDA_HP, IOC_IOPULL_DOWN);
|
|
ti_lib_ioc_pin_type_gpio_input(BOARD_IOID_SCL_HP);
|
|
ti_lib_ioc_io_port_pull_set(BOARD_IOID_SCL_HP, IOC_IOPULL_DOWN);
|
|
|
|
ti_lib_ioc_pin_type_gpio_input(BOARD_IOID_SDA);
|
|
ti_lib_ioc_io_port_pull_set(BOARD_IOID_SDA, IOC_IOPULL_UP);
|
|
ti_lib_ioc_pin_type_gpio_input(BOARD_IOID_SCL);
|
|
ti_lib_ioc_io_port_pull_set(BOARD_IOID_SCL, IOC_IOPULL_UP);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
bool
|
|
board_i2c_write(uint8_t *data, uint8_t len)
|
|
{
|
|
uint32_t i;
|
|
bool success;
|
|
|
|
/* Write slave address */
|
|
ti_lib_i2c_master_slave_addr_set(I2C0_BASE, slave_addr, false);
|
|
|
|
/* Write first byte */
|
|
ti_lib_i2c_master_data_put(I2C0_BASE, data[0]);
|
|
|
|
/* Check if another master has access */
|
|
while(ti_lib_i2c_master_bus_busy(I2C0_BASE));
|
|
|
|
/* Assert RUN + START */
|
|
ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_SEND_START);
|
|
while(ti_lib_i2c_master_busy(I2C0_BASE));
|
|
success = i2c_status();
|
|
|
|
for(i = 1; i < len && success; i++) {
|
|
/* Write next byte */
|
|
ti_lib_i2c_master_data_put(I2C0_BASE, data[i]);
|
|
if(i < len - 1) {
|
|
/* Clear START */
|
|
ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_SEND_CONT);
|
|
while(ti_lib_i2c_master_busy(I2C0_BASE));
|
|
success = i2c_status();
|
|
}
|
|
}
|
|
|
|
/* Assert stop */
|
|
if(success) {
|
|
/* Assert STOP */
|
|
ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_SEND_FINISH);
|
|
while(ti_lib_i2c_master_busy(I2C0_BASE));
|
|
success = i2c_status();
|
|
while(ti_lib_i2c_master_bus_busy(I2C0_BASE));
|
|
}
|
|
|
|
return success;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
bool
|
|
board_i2c_write_single(uint8_t data)
|
|
{
|
|
bool success;
|
|
|
|
/* Write slave address */
|
|
ti_lib_i2c_master_slave_addr_set(I2C0_BASE, slave_addr, false);
|
|
|
|
/* Write first byte */
|
|
ti_lib_i2c_master_data_put(I2C0_BASE, data);
|
|
|
|
/* Check if another master has access */
|
|
while(ti_lib_i2c_master_bus_busy(I2C0_BASE));
|
|
|
|
/* Assert RUN + START + STOP */
|
|
ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_SINGLE_SEND);
|
|
while(ti_lib_i2c_master_busy(I2C0_BASE));
|
|
success = i2c_status();
|
|
|
|
return success;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
bool
|
|
board_i2c_read(uint8_t *data, uint8_t len)
|
|
{
|
|
uint8_t i;
|
|
bool success;
|
|
|
|
/* Set slave address */
|
|
ti_lib_i2c_master_slave_addr_set(I2C0_BASE, slave_addr, true);
|
|
|
|
/* Check if another master has access */
|
|
while(ti_lib_i2c_master_bus_busy(I2C0_BASE));
|
|
|
|
/* Assert RUN + START + ACK */
|
|
ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_RECEIVE_START);
|
|
|
|
i = 0;
|
|
success = true;
|
|
while(i < (len - 1) && success) {
|
|
while(ti_lib_i2c_master_busy(I2C0_BASE));
|
|
success = i2c_status();
|
|
if(success) {
|
|
data[i] = ti_lib_i2c_master_data_get(I2C0_BASE);
|
|
ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_RECEIVE_CONT);
|
|
i++;
|
|
}
|
|
}
|
|
|
|
if(success) {
|
|
while(ti_lib_i2c_master_busy(I2C0_BASE));
|
|
success = i2c_status();
|
|
if(success) {
|
|
data[len - 1] = ti_lib_i2c_master_data_get(I2C0_BASE);
|
|
ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_RECEIVE_FINISH);
|
|
while(ti_lib_i2c_master_bus_busy(I2C0_BASE));
|
|
}
|
|
}
|
|
|
|
return success;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
bool
|
|
board_i2c_write_read(uint8_t *wdata, uint8_t wlen, uint8_t *rdata, uint8_t rlen)
|
|
{
|
|
uint32_t i;
|
|
bool success;
|
|
|
|
/* Set slave address for write */
|
|
ti_lib_i2c_master_slave_addr_set(I2C0_BASE, slave_addr, false);
|
|
|
|
/* Write first byte */
|
|
ti_lib_i2c_master_data_put(I2C0_BASE, wdata[0]);
|
|
|
|
/* Check if another master has access */
|
|
while(ti_lib_i2c_master_bus_busy(I2C0_BASE));
|
|
|
|
/* Assert RUN + START */
|
|
ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_SEND_START);
|
|
while(ti_lib_i2c_master_busy(I2C0_BASE));
|
|
success = i2c_status();
|
|
|
|
for(i = 1; i < wlen && success; i++) {
|
|
/* Write next byte */
|
|
ti_lib_i2c_master_data_put(I2C0_BASE, wdata[i]);
|
|
if(i < wlen - 1) {
|
|
/* Clear START */
|
|
ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_SEND_CONT);
|
|
while(ti_lib_i2c_master_busy(I2C0_BASE));
|
|
success = i2c_status();
|
|
}
|
|
}
|
|
if(!success) {
|
|
return false;
|
|
}
|
|
|
|
/* Set slave address for read */
|
|
ti_lib_i2c_master_slave_addr_set(I2C0_BASE, slave_addr, true);
|
|
|
|
/* Assert ACK */
|
|
ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_RECEIVE_START);
|
|
|
|
i = 0;
|
|
while(i < (rlen - 1) && success) {
|
|
while(ti_lib_i2c_master_busy(I2C0_BASE));
|
|
success = i2c_status();
|
|
if(success) {
|
|
rdata[i] = ti_lib_i2c_master_data_get(I2C0_BASE);
|
|
ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_RECEIVE_CONT);
|
|
i++;
|
|
}
|
|
}
|
|
|
|
if(success) {
|
|
while(ti_lib_i2c_master_busy(I2C0_BASE));
|
|
success = i2c_status();
|
|
if(success) {
|
|
rdata[rlen - 1] = ti_lib_i2c_master_data_get(I2C0_BASE);
|
|
ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_RECEIVE_FINISH);
|
|
while(ti_lib_i2c_master_bus_busy(I2C0_BASE));
|
|
}
|
|
}
|
|
|
|
return success;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
board_i2c_select(uint8_t new_interface, uint8_t address)
|
|
{
|
|
slave_addr = address;
|
|
|
|
if(accessible() == false) {
|
|
board_i2c_wakeup();
|
|
}
|
|
|
|
if(new_interface != interface) {
|
|
interface = new_interface;
|
|
|
|
ti_lib_i2c_master_disable(I2C0_BASE);
|
|
|
|
if(interface == BOARD_I2C_INTERFACE_0) {
|
|
ti_lib_ioc_io_port_pull_set(BOARD_IOID_SDA, IOC_NO_IOPULL);
|
|
ti_lib_ioc_io_port_pull_set(BOARD_IOID_SCL, IOC_NO_IOPULL);
|
|
ti_lib_ioc_pin_type_i2c(I2C0_BASE, BOARD_IOID_SDA, BOARD_IOID_SCL);
|
|
ti_lib_ioc_pin_type_gpio_input(BOARD_IOID_SDA_HP);
|
|
ti_lib_ioc_pin_type_gpio_input(BOARD_IOID_SCL_HP);
|
|
} else if(interface == BOARD_I2C_INTERFACE_1) {
|
|
ti_lib_ioc_io_port_pull_set(BOARD_IOID_SDA_HP, IOC_NO_IOPULL);
|
|
ti_lib_ioc_io_port_pull_set(BOARD_IOID_SCL_HP, IOC_NO_IOPULL);
|
|
ti_lib_ioc_pin_type_i2c(I2C0_BASE, BOARD_IOID_SDA_HP, BOARD_IOID_SCL_HP);
|
|
ti_lib_ioc_pin_type_gpio_input(BOARD_IOID_SDA);
|
|
ti_lib_ioc_pin_type_gpio_input(BOARD_IOID_SCL);
|
|
}
|
|
|
|
/* Enable and initialize the I2C master module */
|
|
ti_lib_i2c_master_init_exp_clk(I2C0_BASE, ti_lib_sys_ctrl_clock_get(),
|
|
true);
|
|
}
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @} */
|