contiki/cpu/cc2538/dev/scb.h
George Oikonomou 40f49948e6 New Platform: TI CC2538 Development Kit
This commit adds cpu, platform and example files,
providing support for running Contiki on TI's cc2538 DK
2013-04-06 21:07:31 +01:00

82 lines
3.6 KiB
C

/*
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup cc2538
* @{
*
* \defgroup cc2538-scb cc2538 System Control Block
* @{
*
* \file
* Header file for the System Control Block (SCB)
*/
#ifndef SCB_H_
#define SCB_H_
#define SCB_CPUID 0xE000ED00 /**< CPU ID Base */
#define SCB_INTCTRL 0xE000ED04 /**< Interrupt Control and State */
#define SCB_VTABLE 0xE000ED08 /**< Vector Table Offset */
#define SCB_APINT 0xE000ED0C /**< Application Interrupt and Reset Control */
#define SCB_SYSCTRL 0xE000ED10 /**< System Control */
#define SCB_CFGCTRL 0xE000ED14 /**< Configuration and Control */
#define SCB_SYSPRI1 0xE000ED18 /**< System Handler Priority 1 */
#define SCB_SYSPRI2 0xE000ED1C /**< System Handler Priority 2 */
#define SCB_SYSPRI3 0xE000ED20 /**< System Handler Priority 3 */
#define SCB_SYSHNDCTRL 0xE000ED24 /**< System Handler Control and State */
#define SCB_FAULTSTAT 0xE000ED28 /**< Configurable Fault Status */
#define SCB_HFAULTSTAT 0xE000ED2C /**< Hard Fault Status */
#define SCB_DEBUG_STAT 0xE000ED30 /**< Debug Status Register */
#define SCB_MMADDR 0xE000ED34 /**< Memory Management Fault Address */
#define SCB_FAULT_ADDR 0xE000ED38 /**< Bus Fault Address */
/*---------------------------------------------------------------------------*/
/** \name VTABLE register bits
* @{
*/
#define SCB_VTABLE_BASE 0x20000000 /**< Vector Table Base */
#define SCB_VTABLE_OFFSET_M 0x1FFFFE00 /**< Vector Table Offset */
/** @} */
/*---------------------------------------------------------------------------*/
/** \name SCB_SYSCTRL register bits
* @{
*/
#define SCB_SYSCTRL_SEVONPEND 0x00000010 /**< Wake up on pending */
#define SCB_SYSCTRL_SLEEPDEEP 0x00000004 /**< Deep sleep enable */
#define SCB_SYSCTRL_SLEEPEXIT 0x00000002 /**< Sleep on ISR exit */
/** @} */
/*---------------------------------------------------------------------------*/
#endif /* SCB_H_ */
/**
* @}
* @}
*/