Benoît Thébaudeau 270ed237fd cc2538: usb: Make the GPIO driving the pull-up optional ... The data sheet recommends that the USB pull-up resistor be driven by a GPIO so that it can be controlled by software, but this is not mandatory. Hence, leave the choice so that CC253-based boards not using this option can build and work fine. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>		2013-11-25 15:15:35 +01:00
..
dev	cc2538: Clean up port and pin definitions	2013-11-25 15:00:41 +01:00
usb	cc2538: usb: Make the GPIO driving the pull-up optional	2013-11-25 15:15:35 +01:00
cc2538.lds	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
clock.c	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
cpu.c	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
cpu.h	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
dbg.c	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
dbg.h	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
debug-uart.h	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
ieee-addr.c	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
ieee-addr.h	Change the InfoPage Location of the IEEE address	2013-04-17 15:44:01 +01:00
lpm.c	cc2538: lpm: Make periph_permit_pm1_funcs static	2013-11-18 11:57:59 +01:00
lpm.h	cc2538: uart: Fix crippled output occurring upon lpm_enter()	2013-11-15 17:24:26 +01:00
Makefile.cc2538	cc2538: Make it possible to use a custom linker script	2013-11-15 15:41:58 +01:00
mtarch.h	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
reg.h	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
rtimer-arch.c	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
rtimer-arch.h	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
slip-arch.c	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
spi-arch.h	cc2538: spi: Add enable and disable functions	2013-11-20 14:20:50 +01:00