contiki/cpu/x86/drivers/legacy_pc/pic.h
Jesus Sanchez-Palencia 23e8090257 x86: Move available drivers into drivers/legacy_pc/
All drivers implemented so far are for chips which are only available
on legacy x86 PCs. This commit moves them into a more appropriate folder,
also making the cpu/x86/drivers/ folder ready for other x86 based SoCs.
2015-12-21 08:06:14 -02:00

87 lines
3.1 KiB
C

/*
* Copyright (C) 2015, Intel Corporation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef PIC_H
#define PIC_H
#include "helpers.h"
#define PIC1_CMD_PORT 0x20
#define PIC1_DATA_PORT 0x21
#define PIC2_CMD_PORT 0xA0
#define PIC2_DATA_PORT 0xA1
#define PIC1_OFFSET 0x20
#define PIC2_OFFSET PIC1_OFFSET + 8
/*
* Returns the actual interrupt number of a given IRQ,
* no matter which PIC it is part of.
*/
#define PIC_INT(a) (a + PIC1_OFFSET)
void pic_unmask_irq(unsigned int num);
/* This function initializes the daisy-chained Master and Slave 8259 PICs.
* It is only called once, so let's give the compiler the option to inline it.
* For more information about the ICWs, please refer to http://stanislavs.org/helppc/8259.html.
*/
static inline void
pic_init(void)
{
/* ICW1: Initialization. */
outb(PIC1_CMD_PORT, 0x11);
outb(PIC2_CMD_PORT, 0x11);
/* ICW2: Remap IRQs by setting an IDT Offset for each PIC. */
outb(PIC1_DATA_PORT, PIC1_OFFSET);
outb(PIC2_DATA_PORT, PIC2_OFFSET);
/* ICW3: Setup Slave to Master's IRQ2. */
outb(PIC1_DATA_PORT, 0x04);
outb(PIC2_DATA_PORT, 0x02);
/* ICW4: Environment setup. Set PIC1 as master and PIC2 as slave. */
outb(PIC1_DATA_PORT, 0x01);
outb(PIC2_DATA_PORT, 0x01);
/* Set the IMR register, masking all hardware interrupts but IRQ 2.
* We will have to unmask each IRQ when registering them. */
outb(PIC1_DATA_PORT, 0xfb);
outb(PIC2_DATA_PORT, 0xff);
}
/*
* This function sends an end-of-interrupt (EOI) to the correct PIC according
* to the IRQ line number.
*/
void pic_eoi(unsigned int irq);
#endif /* PIC_H */