mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-12-23 01:29:33 +00:00
1245 lines
31 KiB
C
1245 lines
31 KiB
C
/*
|
|
* Copyright (c) 2010, Mariano Alvira <mar@devl.org> and other contributors
|
|
* to the MC1322x project (http://mc1322x.devl.org)
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the Institute nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* This file is part of libmc1322x: see http://mc1322x.devl.org
|
|
* for details.
|
|
*
|
|
*
|
|
*/
|
|
|
|
#include <mc1322x.h>
|
|
#include <stdio.h>
|
|
|
|
#ifndef DEBUG_MACA
|
|
#define DEBUG_MACA 0
|
|
#endif
|
|
#if (DEBUG_MACA == 0)
|
|
#define PRINTF(...)
|
|
#else
|
|
#define PRINTF(...) printf(__VA_ARGS__)
|
|
#endif
|
|
|
|
#ifndef MACA_BOUND_CHECK
|
|
#define MACA_BOUND_CHECK 0
|
|
#endif
|
|
#if (MACA_BOUND_CHECK == 0)
|
|
#define BOUND_CHECK(x)
|
|
#else
|
|
#define BOUND_CHECK(x) bound_check(x)
|
|
#endif
|
|
|
|
#ifndef NUM_PACKETS
|
|
#define NUM_PACKETS 32
|
|
#endif
|
|
|
|
/* for 250kHz clock */
|
|
#define MACA_CLOCK_DIV 95
|
|
/* (32 chips/sym) * (sym/4bits) * (8bits/byte) = (64 chips/byte) */
|
|
/* (8 chips/clk) * (byte/64 chips) = byte/8clks */
|
|
#define CLK_PER_BYTE 8
|
|
|
|
#ifndef RECV_SOFTIMEOUT
|
|
#define RECV_SOFTIMEOUT (1024*128*CLK_PER_BYTE)
|
|
#endif
|
|
|
|
#ifndef CPL_TIMEOUT
|
|
#define CPL_TIMEOUT (2*128*CLK_PER_BYTE)
|
|
#endif
|
|
|
|
#define reg(x) (*(volatile uint32_t *)(x))
|
|
|
|
int count_packets(void);
|
|
void Print_Packets(char *s);
|
|
|
|
static volatile packet_t packet_pool[NUM_PACKETS];
|
|
static volatile packet_t *free_head, *rx_end, *tx_end, *dma_tx, *dma_rx;
|
|
|
|
/* rx_head and tx_head are visible to the outside */
|
|
/* so you can peek at it and see if there is data */
|
|
/* waiting for you, or data still to be sent */
|
|
volatile packet_t *rx_head, *tx_head;
|
|
|
|
/* used for ack recpetion if the packet_pool goes empty */
|
|
/* doesn't go back into the pool when freed */
|
|
static volatile packet_t dummy_ack;
|
|
|
|
/* incremented on every maca entry */
|
|
/* you can use this to detect that the receive loop is still running */
|
|
volatile uint32_t maca_entry = 0;
|
|
|
|
enum posts {
|
|
NO_POST = 0,
|
|
TX_POST,
|
|
RX_POST,
|
|
MAX_POST,
|
|
};
|
|
static volatile uint8_t last_post = NO_POST;
|
|
|
|
volatile uint8_t fcs_mode = USE_FCS;
|
|
volatile uint8_t prm_mode = PROMISC;
|
|
|
|
/* call periodically to */
|
|
/* check that maca_entry is changing */
|
|
/* if it is not, it will do a manual call to maca_isr which should */
|
|
/* get the ball rolling again */
|
|
/* also checks that the clock is running --- if it isn't then */
|
|
/* it calls redoes the maca intialization but _DOES NOT_ free all packets */
|
|
|
|
void check_maca(void) {
|
|
safe_irq_disable(MACA);
|
|
static volatile uint32_t last_time;
|
|
static volatile uint32_t last_entry;
|
|
volatile uint32_t i;
|
|
#if DEBUG_MACA
|
|
volatile uint32_t count;
|
|
#endif
|
|
|
|
|
|
/* if *MACA_CLK == last_time */
|
|
/* try waiting for one clock period */
|
|
/* since maybe check_maca is getting called quickly */
|
|
for(i=0; (i < 1024) && (*MACA_CLK == last_time); i++) { continue; }
|
|
|
|
if(*MACA_CLK == last_time) {
|
|
PRINTF("check maca: maca_clk stopped, restarting\n");
|
|
/* clock isn't running */
|
|
ResumeMACASync();
|
|
*INTFRC = (1<<INT_NUM_MACA);
|
|
} else {
|
|
if((last_time > (*MACA_SFTCLK + RECV_SOFTIMEOUT)) &&
|
|
(last_time > (*MACA_CPLCLK + CPL_TIMEOUT))) {
|
|
PRINTF("check maca: complete clocks expired\n");
|
|
/* all complete clocks have expired */
|
|
/* check that maca entry is changing */
|
|
/* if not, do call the isr to restart the cycle */
|
|
if(last_entry == maca_entry) {
|
|
PRINTF("check maca: forcing isr\n");
|
|
*INTFRC = (1<<INT_NUM_MACA);
|
|
}
|
|
}
|
|
}
|
|
|
|
last_entry = maca_entry;
|
|
last_time = *MACA_CLK;
|
|
|
|
#if DEBUG_MACA
|
|
if((count = count_packets()) != NUM_PACKETS) {
|
|
PRINTF("check maca: count_packets %d\n", (int)count);
|
|
Print_Packets("check_maca");
|
|
#if PACKET_STATS
|
|
for(i=0; i<NUM_PACKETS; i++) {
|
|
printf("packet 0x%lx seen %d post_tx %d get_free %d rxd %d\n",
|
|
(uint32_t) &packet_pool[i],
|
|
packet_pool[i].seen,
|
|
packet_pool[i].post_tx,
|
|
packet_pool[i].get_free,
|
|
packet_pool[i].rxd);
|
|
}
|
|
#endif
|
|
if(bit_is_set(*NIPEND, INT_NUM_MACA)) { *INTFRC = (1 << INT_NUM_MACA); }
|
|
}
|
|
#endif /* DEBUG_MACA */
|
|
irq_restore();
|
|
}
|
|
|
|
void maca_init(void) {
|
|
reset_maca();
|
|
radio_init();
|
|
flyback_init();
|
|
init_phy();
|
|
free_head = 0; tx_head = 0; rx_head = 0; rx_end = 0; tx_end = 0; dma_tx = 0; dma_rx = 0;
|
|
free_all_packets();
|
|
|
|
#if DEBUG_MACA
|
|
Print_Packets("maca_init");
|
|
#endif
|
|
|
|
/* initial radio command */
|
|
/* nop, promiscuous, no cca */
|
|
*MACA_CONTROL =
|
|
(prm_mode << PRM) |
|
|
(NO_CCA << MACA_MODE);
|
|
|
|
enable_irq(MACA);
|
|
*INTFRC = (1 << INT_NUM_MACA);
|
|
}
|
|
|
|
#define print_packets(x) Print_Packets(x)
|
|
void Print_Packets(char *s) {
|
|
volatile packet_t *p;
|
|
|
|
printf("packet pool after %s:\n\r",s);
|
|
p = free_head;
|
|
printf("free_head: 0x%lx ", (uint32_t) free_head);
|
|
while(p != 0) {
|
|
p = p->left;
|
|
printf("->0x%lx", (uint32_t) p);
|
|
}
|
|
printf("\n\r");
|
|
|
|
p = tx_head;
|
|
printf("tx_head: 0x%lx ", (uint32_t) tx_head);
|
|
while(p != 0) {
|
|
p = p->left;
|
|
printf("->0x%lx", (uint32_t) p);
|
|
}
|
|
printf("\n\r");
|
|
|
|
p = rx_head;
|
|
printf("rx_head: 0x%lx ", (uint32_t) rx_head);
|
|
while(p != 0) {
|
|
p = p->left;
|
|
printf("->0x%lx", (uint32_t) p);
|
|
}
|
|
printf("\n\r");
|
|
|
|
printf("dma_rx: 0x%lx\n", (uint32_t) dma_rx);
|
|
printf("dma_tx: 0x%lx\n", (uint32_t) dma_tx);
|
|
|
|
}
|
|
|
|
inline void bad_packet_bounds(void) {
|
|
PRINTF("bad packet bounds! Halting.\n");
|
|
while(1) { continue; }
|
|
}
|
|
|
|
int count_packets(void) {
|
|
volatile int8_t total = -1;
|
|
|
|
#if PACKET_STATS
|
|
volatile packet_t *pk;
|
|
volatile uint8_t tx, rx, free;
|
|
volatile int i;
|
|
|
|
for(i = 0; i < NUM_PACKETS; i++) {
|
|
packet_pool[i].seen = 0;
|
|
}
|
|
|
|
pk = tx_head; tx = 0;
|
|
while( pk != 0 ) {
|
|
if(pk->seen == 0) { tx++; }
|
|
pk->seen++;
|
|
pk = pk->left;
|
|
}
|
|
pk = rx_head; rx = 0;
|
|
while( pk != 0 ) {
|
|
if(pk->seen == 0) { rx++; }
|
|
pk->seen++;
|
|
pk = pk->left;
|
|
}
|
|
pk = free_head; free = 0;
|
|
while( pk != 0 ) {
|
|
if(pk->seen == 0) { free++; }
|
|
pk->seen++;
|
|
pk = pk->left;
|
|
}
|
|
|
|
total = free + rx + tx;
|
|
if(dma_rx && (dma_rx->seen == 0)) { dma_rx->seen++; total++; }
|
|
if(dma_tx && (dma_tx->seen == 0)) { dma_tx->seen++; total++; }
|
|
#endif /* PACKET_STATS */
|
|
|
|
return total;
|
|
}
|
|
|
|
void bound_check(volatile packet_t *p) {
|
|
volatile int i;
|
|
|
|
if((p == 0) ||
|
|
(p == &dummy_ack)) { return; }
|
|
for(i=0; i < NUM_PACKETS; i++) {
|
|
if(p == &packet_pool[i]) { return; }
|
|
}
|
|
|
|
bad_packet_bounds();
|
|
}
|
|
|
|
|
|
/* public packet routines */
|
|
/* heads are to the right */
|
|
/* ends are to the left */
|
|
void free_packet(volatile packet_t *p) {
|
|
safe_irq_disable(MACA);
|
|
|
|
BOUND_CHECK(p);
|
|
|
|
if(!p) { PRINTF("free_packet passed packet 0\n\r"); return; }
|
|
if(p == &dummy_ack) { return; }
|
|
|
|
BOUND_CHECK(free_head);
|
|
|
|
p->length = 0; p->offset = 0;
|
|
p->left = free_head; p->right = 0;
|
|
#if PACKET_STATS
|
|
p->seen = 0;
|
|
p->post_tx = 0;
|
|
p->get_free = 0;
|
|
p->rxd = 0;
|
|
#endif
|
|
|
|
free_head = p;
|
|
|
|
BOUND_CHECK(free_head);
|
|
|
|
irq_restore();
|
|
if(bit_is_set(*NIPEND, INT_NUM_MACA)) { *INTFRC = (1 << INT_NUM_MACA); }
|
|
|
|
return;
|
|
}
|
|
|
|
volatile packet_t* get_free_packet(void) {
|
|
volatile packet_t *p;
|
|
|
|
safe_irq_disable(MACA);
|
|
|
|
BOUND_CHECK(free_head);
|
|
|
|
p = free_head;
|
|
if( p != 0 ) {
|
|
free_head = p->left;
|
|
free_head->right = 0;
|
|
}
|
|
|
|
BOUND_CHECK(free_head);
|
|
|
|
#if PACKET_STATS
|
|
p->get_free++;
|
|
#endif
|
|
|
|
// print_packets("get_free_packet");
|
|
irq_restore();
|
|
if(bit_is_set(*NIPEND, INT_NUM_MACA)) { *INTFRC = (1 << INT_NUM_MACA); }
|
|
|
|
return p;
|
|
}
|
|
|
|
void post_receive(void) {
|
|
last_post = RX_POST;
|
|
/* this sets the rxlen field */
|
|
/* this is undocumented but very important */
|
|
/* you will not receive anything without setting it */
|
|
*MACA_TXLEN = (MAX_PACKET_SIZE << 16);
|
|
if(dma_rx == 0) {
|
|
dma_rx = get_free_packet();
|
|
if (dma_rx == 0) {
|
|
PRINTF("trying to fill MACA_DMARX in post_receieve but out of packet buffers\n\r");
|
|
/* set the sftclock so that we return to the maca_isr */
|
|
*MACA_SFTCLK = *MACA_CLK + RECV_SOFTIMEOUT; /* soft timeout */
|
|
*MACA_TMREN = (1 << maca_tmren_sft);
|
|
/* no free buffers, so don't start a reception */
|
|
enable_irq(MACA);
|
|
return;
|
|
}
|
|
}
|
|
BOUND_CHECK(dma_rx);
|
|
BOUND_CHECK(dma_tx);
|
|
*MACA_DMARX = (uint32_t)&(dma_rx->data[0]);
|
|
/* with timeout */
|
|
*MACA_SFTCLK = *MACA_CLK + RECV_SOFTIMEOUT; /* soft timeout */
|
|
*MACA_TMREN = (1 << maca_tmren_sft);
|
|
/* start the receive sequence */
|
|
*MACA_CONTROL = ( (1 << maca_ctrl_asap) |
|
|
( 4 << PRECOUNT) |
|
|
( fcs_mode << NOFC ) |
|
|
( prm_mode << PRM) |
|
|
#if 0 //dak says removing ctrl auto fixes the autoack checksum error --- doesn't cause a performance issue either
|
|
(1 << maca_ctrl_auto) |
|
|
#endif
|
|
(maca_ctrl_seq_rx));
|
|
/* status bit 10 is set immediately */
|
|
/* then 11, 10, and 9 get set */
|
|
/* they are cleared once we get back to maca_isr */
|
|
}
|
|
|
|
|
|
volatile packet_t* rx_packet(void) {
|
|
volatile packet_t *p;
|
|
safe_irq_disable(MACA);
|
|
|
|
BOUND_CHECK(rx_head);
|
|
|
|
p = rx_head;
|
|
if( p != 0 ) {
|
|
rx_head = p->left;
|
|
rx_head->right = 0;
|
|
}
|
|
|
|
#if PACKET_STATS
|
|
p->rxd++;
|
|
#endif
|
|
|
|
// print_packets("rx_packet");
|
|
irq_restore();
|
|
if(bit_is_set(*NIPEND, INT_NUM_MACA)) { *INTFRC = (1 << INT_NUM_MACA); }
|
|
|
|
return p;
|
|
}
|
|
|
|
void post_tx(void) {
|
|
/* set dma tx pointer to the payload */
|
|
/* and set the tx len */
|
|
disable_irq(MACA);
|
|
last_post = TX_POST;
|
|
dma_tx = tx_head;
|
|
#if PACKET_STATS
|
|
dma_tx->post_tx++;
|
|
#endif
|
|
*MACA_TXSEQNR = dma_tx->data[2];
|
|
*MACA_TXLEN = (uint32_t)((dma_tx->length) + 2) | (3 << 16); /* set rx len to ACK length */
|
|
*MACA_DMATX = (uint32_t)&(dma_tx->data[ 0 + dma_tx->offset]);
|
|
if(dma_rx == 0) {
|
|
dma_rx = get_free_packet();
|
|
if (dma_rx == 0) {
|
|
dma_rx = &dummy_ack;
|
|
PRINTF("trying to fill MACA_DMARX on post_tx but out of packet buffers\n\r");
|
|
}
|
|
|
|
}
|
|
BOUND_CHECK(dma_rx);
|
|
BOUND_CHECK(dma_tx);
|
|
*MACA_DMARX = (uint32_t)&(dma_rx->data[0]);
|
|
/* disable soft timeout clock */
|
|
/* disable start clock */
|
|
*MACA_TMRDIS = (1 << maca_tmren_sft) | ( 1<< maca_tmren_cpl) | ( 1 << maca_tmren_strt ) ;
|
|
|
|
/* set complete clock to long value */
|
|
/* acts like a watchdog in case the MACA locks up */
|
|
*MACA_CPLCLK = *MACA_CLK + CPL_TIMEOUT;
|
|
/* enable complete clock */
|
|
*MACA_TMREN = (1 << maca_tmren_cpl);
|
|
|
|
enable_irq(MACA);
|
|
*MACA_CONTROL = ( ( 4 << PRECOUNT) |
|
|
( prm_mode << PRM) |
|
|
(maca_ctrl_mode_no_cca << maca_ctrl_mode) |
|
|
(1 << maca_ctrl_asap) |
|
|
(maca_ctrl_seq_tx));
|
|
/* status bit 10 is set immediately */
|
|
/* then 11, 10, and 9 get set */
|
|
/* they are cleared once we get back to maca_isr */
|
|
}
|
|
|
|
void tx_packet(volatile packet_t *p) {
|
|
safe_irq_disable(MACA);
|
|
|
|
BOUND_CHECK(p);
|
|
|
|
if(!p) { PRINTF("tx_packet passed packet 0\n\r"); return; }
|
|
if(tx_head == 0) {
|
|
/* start a new queue if empty */
|
|
tx_end = p;
|
|
tx_end->left = 0; tx_end->right = 0;
|
|
tx_head = tx_end;
|
|
} else {
|
|
/* add p to the end of the queue */
|
|
tx_end->left = p;
|
|
p->right = tx_end;
|
|
/* move the queue */
|
|
tx_end = p; tx_end->left = 0;
|
|
}
|
|
// print_packets("tx packet");
|
|
irq_restore();
|
|
if(bit_is_set(*NIPEND, INT_NUM_MACA)) { *INTFRC = (1 << INT_NUM_MACA); }
|
|
if(last_post == NO_POST) { *INTFRC = (1<<INT_NUM_MACA); }
|
|
/* if we are in a reception cycle, advance the softclock timeout to now */
|
|
if(last_post == RX_POST) { *MACA_SFTCLK = *MACA_CLK + CLK_PER_BYTE; }
|
|
return;
|
|
}
|
|
|
|
void free_all_packets(void) {
|
|
volatile int i;
|
|
safe_irq_disable(MACA);
|
|
|
|
free_head = 0;
|
|
for(i=0; i<NUM_PACKETS; i++) {
|
|
free_packet((volatile packet_t *)&(packet_pool[i]));
|
|
}
|
|
rx_head = 0; rx_end = 0;
|
|
tx_head = 0; tx_end = 0;
|
|
|
|
irq_restore();
|
|
if(bit_is_set(*NIPEND, INT_NUM_MACA)) { *INTFRC = (1 << INT_NUM_MACA); }
|
|
|
|
return;
|
|
}
|
|
|
|
/* private routines used by driver */
|
|
|
|
void free_tx_head(void) {
|
|
volatile packet_t *p;
|
|
safe_irq_disable(MACA);
|
|
|
|
BOUND_CHECK(tx_head);
|
|
|
|
p = tx_head;
|
|
tx_head = tx_head->left;
|
|
if(tx_head == 0) { tx_end = 0; }
|
|
free_packet(p);
|
|
|
|
// print_packets("free tx head");
|
|
irq_restore();
|
|
if(bit_is_set(*NIPEND, INT_NUM_MACA)) { *INTFRC = (1 << INT_NUM_MACA); }
|
|
|
|
return;
|
|
}
|
|
|
|
void add_to_rx(volatile packet_t *p) {
|
|
safe_irq_disable(MACA);
|
|
|
|
BOUND_CHECK(p);
|
|
|
|
if(!p) { PRINTF("add_to_rx passed packet 0\n\r"); return; }
|
|
p->offset = 1; /* first byte is the length */
|
|
if(rx_head == 0) {
|
|
/* start a new queue if empty */
|
|
rx_end = p;
|
|
rx_end->left = 0; rx_end->right = 0;
|
|
rx_head = rx_end;
|
|
} else {
|
|
rx_end->left = p;
|
|
p->right = rx_end;
|
|
rx_end = p; rx_end->left = 0;
|
|
}
|
|
|
|
// print_packets("add to rx");
|
|
irq_restore();
|
|
if(bit_is_set(*NIPEND, INT_NUM_MACA)) { *INTFRC = (1 << INT_NUM_MACA); }
|
|
|
|
return;
|
|
}
|
|
|
|
void decode_status(void) {
|
|
volatile uint32_t code;
|
|
|
|
code = get_field(*MACA_STATUS,CODE);
|
|
/* PRINTF("status code 0x%x\n\r",code); */
|
|
|
|
switch(code)
|
|
{
|
|
case ABORTED:
|
|
{
|
|
PRINTF("maca: aborted\n\r");
|
|
ResumeMACASync();
|
|
break;
|
|
|
|
}
|
|
case NOT_COMPLETED:
|
|
{
|
|
PRINTF("maca: not completed\n\r");
|
|
ResumeMACASync();
|
|
break;
|
|
|
|
}
|
|
case CODE_TIMEOUT:
|
|
{
|
|
PRINTF("maca: timeout\n\r");
|
|
ResumeMACASync();
|
|
break;
|
|
|
|
}
|
|
case NO_ACK:
|
|
{
|
|
PRINTF("maca: no ack\n\r");
|
|
ResumeMACASync();
|
|
break;
|
|
|
|
}
|
|
case EXT_TIMEOUT:
|
|
{
|
|
PRINTF("maca: ext timeout\n\r");
|
|
ResumeMACASync();
|
|
break;
|
|
|
|
}
|
|
case EXT_PND_TIMEOUT:
|
|
{
|
|
PRINTF("maca: ext pnd timeout\n\r");
|
|
ResumeMACASync();
|
|
break;
|
|
}
|
|
case SUCCESS:
|
|
{
|
|
//PRINTF("maca: success\n\r");
|
|
ResumeMACASync();
|
|
break;
|
|
}
|
|
default:
|
|
{
|
|
PRINTF("status: %x", (unsigned int)*MACA_STATUS);
|
|
ResumeMACASync();
|
|
|
|
}
|
|
}
|
|
}
|
|
|
|
void maca_isr(void) {
|
|
|
|
// print_packets("maca_isr");
|
|
|
|
maca_entry++;
|
|
|
|
if (bit_is_set(*MACA_STATUS, maca_status_ovr))
|
|
{ PRINTF("maca overrun\n\r"); }
|
|
if (bit_is_set(*MACA_STATUS, maca_status_busy))
|
|
{ PRINTF("maca busy\n\r"); }
|
|
if (bit_is_set(*MACA_STATUS, maca_status_crc))
|
|
{ PRINTF("maca crc error\n\r"); }
|
|
if (bit_is_set(*MACA_STATUS, maca_status_to))
|
|
{ PRINTF("maca timeout\n\r"); }
|
|
|
|
if (data_indication_irq()) {
|
|
*MACA_CLRIRQ = (1 << maca_irq_di);
|
|
dma_rx->length = *MACA_GETRXLVL - 2; /* packet length does not include FCS */
|
|
dma_rx->lqi = get_lqi();
|
|
dma_rx->rx_time = *MACA_TIMESTAMP;
|
|
|
|
/* check if received packet needs an ack */
|
|
if(dma_rx->data[1] & 0x20) {
|
|
/* this wait is necessary to auto-ack */
|
|
volatile uint32_t wait_clk;
|
|
wait_clk = *MACA_CLK + 200;
|
|
while(*MACA_CLK < wait_clk) { continue; }
|
|
}
|
|
|
|
if(maca_rx_callback != 0) { maca_rx_callback(dma_rx); }
|
|
|
|
add_to_rx(dma_rx);
|
|
dma_rx = 0;
|
|
}
|
|
if (filter_failed_irq()) {
|
|
PRINTF("maca filter failed\n\r");
|
|
ResumeMACASync();
|
|
*MACA_CLRIRQ = (1 << maca_irq_flt);
|
|
}
|
|
if (checksum_failed_irq()) {
|
|
PRINTF("maca checksum failed\n\r");
|
|
ResumeMACASync();
|
|
*MACA_CLRIRQ = (1 << maca_irq_crc);
|
|
}
|
|
if (softclock_irq()) {
|
|
*MACA_CLRIRQ = (1 << maca_irq_sftclk);
|
|
}
|
|
if (poll_irq()) {
|
|
*MACA_CLRIRQ = (1 << maca_irq_poll);
|
|
}
|
|
if(action_complete_irq()) {
|
|
/* PRINTF("maca action complete %d\n\r", get_field(*MACA_CONTROL,SEQUENCE)); */
|
|
if(last_post == TX_POST) {
|
|
tx_head->status = get_field(*MACA_STATUS,CODE);
|
|
if(maca_tx_callback != 0) { maca_tx_callback(tx_head); }
|
|
dma_tx = 0;
|
|
free_tx_head();
|
|
last_post = NO_POST;
|
|
}
|
|
ResumeMACASync();
|
|
*MACA_CLRIRQ = (1 << maca_irq_acpl);
|
|
}
|
|
|
|
decode_status();
|
|
|
|
if (*MACA_IRQ != 0)
|
|
{ PRINTF("*MACA_IRQ %x\n\r", (unsigned int)*MACA_IRQ); }
|
|
|
|
if(tx_head != 0) {
|
|
post_tx();
|
|
} else {
|
|
post_receive();
|
|
}
|
|
}
|
|
|
|
|
|
static uint8_t ram_values[4];
|
|
|
|
|
|
void init_phy(void)
|
|
{
|
|
// *MACA_TMREN = (1 << maca_tmren_strt) | (1 << maca_tmren_cpl);
|
|
*MACA_CLKDIV = MACA_CLOCK_DIV;
|
|
*MACA_WARMUP = 0x00180012;
|
|
*MACA_EOFDELAY = 0x00000004;
|
|
*MACA_CCADELAY = 0x001a0022;
|
|
*MACA_TXCCADELAY = 0x00000025;
|
|
*MACA_FRAMESYNC0 = 0x000000A7;
|
|
*MACA_CLK = 0x00000008;
|
|
*MACA_RXACKDELAY = 30;
|
|
*MACA_RXEND = 180;
|
|
*MACA_TXACKDELAY = 68;
|
|
*MACA_MASKIRQ = ((1 << maca_irq_rst) |
|
|
(1 << maca_irq_acpl) |
|
|
(1 << maca_irq_cm) |
|
|
(1 << maca_irq_flt) |
|
|
(1 << maca_irq_crc) |
|
|
(1 << maca_irq_di) |
|
|
(1 << maca_irq_sftclk)
|
|
);
|
|
*MACA_SLOTOFFSET = 0x00350000;
|
|
}
|
|
|
|
void reset_maca(void)
|
|
{
|
|
volatile uint32_t cnt;
|
|
|
|
*MACA_RESET = (1 << maca_reset_rst);
|
|
|
|
for(cnt = 0; cnt < 100; cnt++) {};
|
|
|
|
*MACA_RESET = (1 << maca_reset_clkon);
|
|
|
|
*MACA_CONTROL = maca_ctrl_seq_nop;
|
|
|
|
for(cnt = 0; cnt < 400000; cnt++) {};
|
|
|
|
/* Clear all interrupts. */
|
|
*MACA_CLRIRQ = 0xffff;
|
|
}
|
|
|
|
|
|
/*
|
|
004030c4 <SMAC_InitFlybackSettings>:
|
|
4030c4: 4806 ldr r0, [pc, #24] (4030e0 <SMAC_InitFlybackSettings+0x1c>) // r0 gets base 0x80009a00
|
|
4030c6: 6881 ldr r1, [r0, #8] // r1 gets *(0x80009a08)
|
|
4030c8: 4806 ldr r0, [pc, #24] (4030e4 <SMAC_InitFlybackSettings+0x20>) // r0 gets 0x0000f7df
|
|
4030ca: 4308 orrs r0, r1 // or them, r0 has it
|
|
4030cc: 4904 ldr r1, [pc, #16] (4030e0 <SMAC_InitFlybackSettings+0x1c>) // r1 gets base 0x80009a00
|
|
4030ce: 6088 str r0, [r1, #8] // put r0 into 0x80009a08
|
|
4030d0: 0008 lsls r0, r1, #0 // r0 gets r1, r0 is the base now
|
|
4030d2: 4905 ldr r1, [pc, #20] (4030e8 <SMAC_InitFlybackSettings+0x24>) // r1 gets 0x00ffffff
|
|
4030d4: 60c1 str r1, [r0, #12] // put 0x00ffffff into base+12
|
|
4030d6: 0b09 lsrs r1, r1, #12 // r1 = 0x00ffffff >> 12
|
|
4030d8: 6101 str r1, [r0, #16] // put r1 base+16
|
|
4030da: 2110 movs r1, #16 // r1 gets 16
|
|
4030dc: 6001 str r1, [r0, #0] // put r1 in the base
|
|
4030de: 4770 bx lr // return
|
|
4030e0: 80009a00 .word 0x80009a00
|
|
4030e4: 0000f7df .word 0x0000f7df
|
|
4030e8: 00ffffff .word 0x00ffffff
|
|
*/
|
|
|
|
/* tested and is good */
|
|
#define RF_BASE 0x80009a00
|
|
void flyback_init(void) {
|
|
uint32_t val8, or;
|
|
|
|
val8 = *(volatile uint32_t *)(RF_BASE+8);
|
|
or = val8 | 0x0000f7df;
|
|
*(volatile uint32_t *)(RF_BASE+8) = or;
|
|
*(volatile uint32_t *)(RF_BASE+12) = 0x00ffffff;
|
|
*(volatile uint32_t *)(RF_BASE+16) = (((uint32_t)0x00ffffff)>>12);
|
|
*(volatile uint32_t *)(RF_BASE) = 16;
|
|
/* good luck and godspeed */
|
|
}
|
|
|
|
#define MAX_SEQ1 2
|
|
const uint32_t addr_seq1[MAX_SEQ1] = {
|
|
0x80003048,
|
|
0x8000304c,
|
|
};
|
|
|
|
const uint32_t data_seq1[MAX_SEQ1] = {
|
|
0x00000f78,
|
|
0x00607707,
|
|
};
|
|
|
|
|
|
#define MAX_SEQ2 2
|
|
const uint32_t addr_seq2[MAX_SEQ2] = {
|
|
0x8000a050,
|
|
0x8000a054,
|
|
};
|
|
|
|
const uint32_t data_seq2[MAX_SEQ2] = {
|
|
0x0000047b,
|
|
0x0000007b,
|
|
};
|
|
|
|
#define MAX_CAL3_SEQ1 3
|
|
const uint32_t addr_cal3_seq1[MAX_CAL3_SEQ1] = { 0x80009400,0x80009a04,0x80009a00, };
|
|
const uint32_t data_cal3_seq1[MAX_CAL3_SEQ1] = {0x00020017,0x8185a0a4,0x8c900025, };
|
|
|
|
#define MAX_CAL3_SEQ2 2
|
|
const uint32_t addr_cal3_seq2[MAX_CAL3_SEQ2] = { 0x80009a00,0x80009a00,};
|
|
const uint32_t data_cal3_seq2[MAX_CAL3_SEQ2] = { 0x8c900021,0x8c900027,};
|
|
|
|
#define MAX_CAL3_SEQ3 1
|
|
const uint32_t addr_cal3_seq3[MAX_CAL3_SEQ3] = { 0x80009a00 };
|
|
const uint32_t data_cal3_seq3[MAX_CAL3_SEQ3] = { 0x8c900000 };
|
|
|
|
#define MAX_CAL5 4
|
|
const uint32_t addr_cal5[MAX_CAL5] = {
|
|
0x80009400,
|
|
0x8000a050,
|
|
0x8000a054,
|
|
0x80003048,
|
|
};
|
|
const uint32_t data_cal5[MAX_CAL5] = {
|
|
0x00000017,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000f00,
|
|
};
|
|
|
|
#define MAX_DATA 43
|
|
const uint32_t addr_reg_rep[MAX_DATA] = { 0x80004118,0x80009204,0x80009208,0x8000920c,0x80009210,0x80009300,0x80009304,0x80009308,0x8000930c,0x80009310,0x80009314,0x80009318,0x80009380,0x80009384,0x80009388,0x8000938c,0x80009390,0x80009394,0x8000a008,0x8000a018,0x8000a01c,0x80009424,0x80009434,0x80009438,0x8000943c,0x80009440,0x80009444,0x80009448,0x8000944c,0x80009450,0x80009460,0x80009464,0x8000947c,0x800094e0,0x800094e4,0x800094e8,0x800094ec,0x800094f0,0x800094f4,0x800094f8,0x80009470,0x8000981c,0x80009828 };
|
|
|
|
const uint32_t data_reg_rep[MAX_DATA] = { 0x00180012,0x00000605,0x00000504,0x00001111,0x0fc40000,0x20046000,0x4005580c,0x40075801,0x4005d801,0x5a45d800,0x4a45d800,0x40044000,0x00106000,0x00083806,0x00093807,0x0009b804,0x000db800,0x00093802,0x00000015,0x00000002,0x0000000f,0x0000aaa0,0x01002020,0x016800fe,0x8e578248,0x000000dd,0x00000946,0x0000035a,0x00100010,0x00000515,0x00397feb,0x00180358,0x00000455,0x00000001,0x00020003,0x00040014,0x00240034,0x00440144,0x02440344,0x04440544,0x0ee7fc00,0x00000082,0x0000002a };
|
|
|
|
void maca_off(void) {
|
|
disable_irq(MACA);
|
|
/* turn off the radio regulators */
|
|
reg(0x80003048) = 0x00000f00;
|
|
/* hold the maca in reset */
|
|
maca_reset = maca_reset_rst;
|
|
}
|
|
|
|
void maca_on(void) {
|
|
/* turn the radio regulators back on */
|
|
reg(0x80003048) = 0x00000f78;
|
|
/* reinitialize the phy */
|
|
reset_maca();
|
|
init_phy();
|
|
|
|
enable_irq(MACA);
|
|
*INTFRC = (1 << INT_NUM_MACA);
|
|
}
|
|
|
|
/* initialized with 0x4c */
|
|
uint8_t ctov[16] = {
|
|
0x0b,
|
|
0x0b,
|
|
0x0b,
|
|
0x0a,
|
|
0x0d,
|
|
0x0d,
|
|
0x0c,
|
|
0x0c,
|
|
0x0f,
|
|
0x0e,
|
|
0x0e,
|
|
0x0e,
|
|
0x11,
|
|
0x10,
|
|
0x10,
|
|
0x0f,
|
|
};
|
|
|
|
/* get_ctov thanks to Umberto */
|
|
|
|
#define _INIT_CTOV_WORD_1 0x00dfbe77
|
|
#define _INIT_CTOV_WORD_2 0x023126e9
|
|
uint8_t get_ctov( uint32_t r0, uint32_t r1 )
|
|
{
|
|
|
|
r0 = r0 * _INIT_CTOV_WORD_1;
|
|
r0 += ( r1 << 22 );
|
|
r0 += _INIT_CTOV_WORD_2;
|
|
|
|
r0 = (uint32_t)(((int32_t)r0) >> 25);
|
|
|
|
return (uint8_t)r0;
|
|
}
|
|
|
|
|
|
/* radio_init has been tested to be good */
|
|
void radio_init(void) {
|
|
volatile uint32_t i;
|
|
/* sequence 1 */
|
|
for(i=0; i<MAX_SEQ1; i++) {
|
|
*(volatile uint32_t *)(addr_seq1[i]) = data_seq1[i];
|
|
}
|
|
/* seq 1 delay */
|
|
for(i=0; i<0x161a8; i++) { continue; }
|
|
/* sequence 2 */
|
|
for(i=0; i<MAX_SEQ2; i++) {
|
|
*(volatile uint32_t *)(addr_seq2[i]) = data_seq2[i];
|
|
}
|
|
/* modem val */
|
|
*(volatile uint32_t *)0x80009000 = 0x80050100;
|
|
/* cal 3 seq 1*/
|
|
for(i=0; i<MAX_CAL3_SEQ1; i++) {
|
|
*(volatile uint32_t *)(addr_cal3_seq1[i]) = data_cal3_seq1[i];
|
|
}
|
|
/* cal 3 delay */
|
|
for(i=0; i<0x11194; i++) { continue; }
|
|
/* cal 3 seq 2*/
|
|
for(i=0; i<MAX_CAL3_SEQ2; i++) {
|
|
*(volatile uint32_t *)(addr_cal3_seq2[i]) = data_cal3_seq2[i];
|
|
}
|
|
/* cal 3 delay */
|
|
for(i=0; i<0x11194; i++) { continue; }
|
|
/* cal 3 seq 3*/
|
|
for(i=0; i<MAX_CAL3_SEQ3; i++) {
|
|
*(volatile uint32_t *)(addr_cal3_seq3[i]) = data_cal3_seq3[i];
|
|
}
|
|
/* cal 5 */
|
|
for(i=0; i<MAX_CAL5; i++) {
|
|
*(volatile uint32_t *)(addr_cal5[i]) = data_cal5[i];
|
|
}
|
|
/*reg replacment */
|
|
for(i=0; i<MAX_DATA; i++) {
|
|
*(volatile uint32_t *)(addr_reg_rep[i]) = data_reg_rep[i];
|
|
}
|
|
|
|
PRINTF("initfromflash\n\r");
|
|
|
|
*(volatile uint32_t *)(0x80003048) = 0x00000f04; /* bypass the buck */
|
|
for(i=0; i<0x161a8; i++) { continue; } /* wait for the bypass to take */
|
|
// while((((*(volatile uint32_t *)(0x80003018))>>17) & 1) !=1) { continue; } /* wait for the bypass to take */
|
|
*(volatile uint32_t *)(0x80003048) = 0x00000fa4; /* start the regulators */
|
|
for(i=0; i<0x161a8; i++) { continue; } /* wait for the bypass to take */
|
|
|
|
init_from_flash(0x1F000);
|
|
|
|
PRINTF("ram_values:\n\r");
|
|
for(i=0; i<4; i++) {
|
|
PRINTF(" 0x%02x\n\r",ram_values[i]);
|
|
}
|
|
|
|
PRINTF("radio_init: ctov parameter 0x%02x\n\r",ram_values[3]);
|
|
for(i=0; i<16; i++) {
|
|
ctov[i] = get_ctov(i,ram_values[3]);
|
|
PRINTF("radio_init: ctov[%d] = 0x%02x\n\r",(int)i,ctov[i]);
|
|
}
|
|
|
|
|
|
}
|
|
|
|
const uint32_t PSMVAL[19] = {
|
|
0x0000080f,
|
|
0x0000080f,
|
|
0x0000080f,
|
|
0x0000080f,
|
|
0x0000081f,
|
|
0x0000081f,
|
|
0x0000081f,
|
|
0x0000080f,
|
|
0x0000080f,
|
|
0x0000080f,
|
|
0x0000001f,
|
|
0x0000000f,
|
|
0x0000000f,
|
|
0x00000816,
|
|
0x0000001b,
|
|
0x0000000b,
|
|
0x00000802,
|
|
0x00000817,
|
|
0x00000003,
|
|
};
|
|
|
|
const uint32_t PAVAL[19] = {
|
|
0x000022c0,
|
|
0x000022c0,
|
|
0x000022c0,
|
|
0x00002280,
|
|
0x00002303,
|
|
0x000023c0,
|
|
0x00002880,
|
|
0x000029f0,
|
|
0x000029f0,
|
|
0x000029f0,
|
|
0x000029c0,
|
|
0x00002bf0,
|
|
0x000029f0,
|
|
0x000028a0,
|
|
0x00002800,
|
|
0x00002ac0,
|
|
0x00002880,
|
|
0x00002a00,
|
|
0x00002b00,
|
|
};
|
|
|
|
const uint32_t AIMVAL[19] = {
|
|
0x000123a0,
|
|
0x000163a0,
|
|
0x0001a3a0,
|
|
0x0001e3a0,
|
|
0x000223a0,
|
|
0x000263a0,
|
|
0x0002a3a0,
|
|
0x0002e3a0,
|
|
0x000323a0,
|
|
0x000363a0,
|
|
0x0003a3a0,
|
|
0x0003a3a0,
|
|
0x0003e3a0,
|
|
0x000423a0,
|
|
0x000523a0,
|
|
0x000423a0,
|
|
0x0004e3a0,
|
|
0x0004e3a0,
|
|
0x0004e3a0,
|
|
};
|
|
|
|
#define RF_REG 0x80009400
|
|
void set_demodulator_type(uint8_t demod) {
|
|
uint32_t val = reg(RF_REG);
|
|
if(demod == DEMOD_NCD) {
|
|
val = (val & ~1);
|
|
} else {
|
|
val = (val | 1);
|
|
}
|
|
reg(RF_REG) = val;
|
|
}
|
|
|
|
/* tested and seems to be good */
|
|
#define ADDR_POW1 0x8000a014
|
|
#define ADDR_POW2 ADDR_POW1 + 12
|
|
#define ADDR_POW3 ADDR_POW1 + 64
|
|
void set_power(uint8_t power) {
|
|
safe_irq_disable(MACA);
|
|
|
|
reg(ADDR_POW1) = PSMVAL[power];
|
|
|
|
/* see http://devl.org/pipermail/mc1322x/2009-October/000065.html */
|
|
/* reg(ADDR_POW2) = (ADDR_POW1>>18) | PAVAL[power]; */
|
|
#ifdef USE_PA
|
|
reg(ADDR_POW2) = 0xffffdfff & PAVAL[power]; /* single port */
|
|
#else
|
|
reg(ADDR_POW2) = 0x00002000 | PAVAL[power]; /* dual port */
|
|
#endif
|
|
|
|
reg(ADDR_POW3) = AIMVAL[power];
|
|
|
|
irq_restore();
|
|
if(bit_is_set(*NIPEND, INT_NUM_MACA)) { *INTFRC = (1 << INT_NUM_MACA); }
|
|
|
|
}
|
|
|
|
const uint8_t VCODivI[16] = {
|
|
0x2f,
|
|
0x2f,
|
|
0x2f,
|
|
0x2f,
|
|
0x2f,
|
|
0x2f,
|
|
0x2f,
|
|
0x2f,
|
|
0x30,
|
|
0x30,
|
|
0x30,
|
|
0x2f,
|
|
0x30,
|
|
0x30,
|
|
0x30,
|
|
0x30,
|
|
};
|
|
|
|
const uint32_t VCODivF[16] = {
|
|
0x00355555,
|
|
0x006aaaaa,
|
|
0x00a00000,
|
|
0x00d55555,
|
|
0x010aaaaa,
|
|
0x01400000,
|
|
0x01755555,
|
|
0x01aaaaaa,
|
|
0x01e00000,
|
|
0x00155555,
|
|
0x004aaaaa,
|
|
0x00800000,
|
|
0x00b55555,
|
|
0x00eaaaaa,
|
|
0x01200000,
|
|
0x01555555,
|
|
};
|
|
|
|
/* tested good */
|
|
#define ADDR_CHAN1 0x80009800
|
|
#define ADDR_CHAN2 (ADDR_CHAN1+12)
|
|
#define ADDR_CHAN3 (ADDR_CHAN1+16)
|
|
#define ADDR_CHAN4 (ADDR_CHAN1+48)
|
|
void set_channel(uint8_t chan) {
|
|
volatile uint32_t tmp;
|
|
safe_irq_disable(MACA);
|
|
|
|
tmp = reg(ADDR_CHAN1);
|
|
tmp = tmp & 0xbfffffff;
|
|
reg(ADDR_CHAN1) = tmp;
|
|
|
|
reg(ADDR_CHAN2) = VCODivI[chan];
|
|
reg(ADDR_CHAN3) = VCODivF[chan];
|
|
|
|
tmp = reg(ADDR_CHAN4);
|
|
tmp = tmp | 2;
|
|
reg(ADDR_CHAN4) = tmp;
|
|
|
|
tmp = reg(ADDR_CHAN4);
|
|
tmp = tmp | 4;
|
|
reg(ADDR_CHAN4) = tmp;
|
|
|
|
tmp = tmp & 0xffffe0ff;
|
|
tmp = tmp | (((ctov[chan])<<8)&0x1F00);
|
|
reg(ADDR_CHAN4) = tmp;
|
|
/* duh! */
|
|
irq_restore();
|
|
if(bit_is_set(*NIPEND, INT_NUM_MACA)) { *INTFRC = (1 << INT_NUM_MACA); }
|
|
}
|
|
|
|
uint8_t (*get_lqi)(void) = (void *) 0x0000e04d;
|
|
|
|
#define ROM_END 0x0013ffff
|
|
#define ENTRY_EOF 0x00000e0f
|
|
/* processes up to 4 words of initialization entries */
|
|
/* returns the number of words processed */
|
|
uint32_t exec_init_entry(volatile uint32_t *entries, uint8_t *valbuf)
|
|
{
|
|
volatile uint32_t i;
|
|
if(entries[0] <= ROM_END) {
|
|
if (entries[0] == 0) {
|
|
/* do delay command*/
|
|
PRINTF("init_entry: delay 0x%08x\n\r", (unsigned int)entries[1]);
|
|
for(i=0; i<entries[1]; i++) { continue; }
|
|
return 2;
|
|
} else if (entries[0] == 1) {
|
|
/* do bit set/clear command*/
|
|
PRINTF("init_entry: bit set clear 0x%08x 0x%08x 0x%08x\n\r", (unsigned int)entries[1], (unsigned int)entries[2], (unsigned int)entries[3]);
|
|
reg(entries[2]) = (reg(entries[2]) & ~entries[1]) | (entries[3] & entries[1]);
|
|
return 4;
|
|
} else if ((entries[0] >= 16) &&
|
|
(entries[0] < 0xfff1)) {
|
|
/* store bytes in valbuf */
|
|
PRINTF("init_entry: store in valbuf 0x%02x position %d\n\r",
|
|
(unsigned int)entries[1],
|
|
(unsigned int)(entries[0]>>4)-1);
|
|
valbuf[(entries[0]>>4)-1] = entries[1];
|
|
return 2;
|
|
} else if (entries[0] == ENTRY_EOF) {
|
|
PRINTF("init_entry: eof ");
|
|
return 0;
|
|
} else {
|
|
/* invalid command code */
|
|
PRINTF("init_entry: invaild code 0x%08x\n\r",(unsigned int)entries[0]);
|
|
return 0;
|
|
}
|
|
} else { /* address isn't in ROM space */
|
|
/* do store value in address command */
|
|
PRINTF("init_entry: address value pair - *0x%08x = 0x%08x\n\r",
|
|
(unsigned int)entries[0],
|
|
(unsigned int)entries[1]);
|
|
reg(entries[0]) = entries[1];
|
|
return 2;
|
|
}
|
|
}
|
|
|
|
|
|
#define FLASH_INIT_MAGIC 0x00000abc
|
|
uint32_t init_from_flash(uint32_t addr) {
|
|
nvmType_t type=0;
|
|
nvmErr_t err;
|
|
volatile uint32_t buf[8];
|
|
volatile uint32_t len;
|
|
volatile uint32_t i=0,j;
|
|
|
|
err = nvm_detect(gNvmInternalInterface_c, &type);
|
|
PRINTF("nvm_detect returned type 0x%08x err 0x%02x\n\r", type, err);
|
|
|
|
nvm_setsvar(0);
|
|
err = nvm_read(gNvmInternalInterface_c, type, (uint8_t *)buf, addr, 8);
|
|
i+=8;
|
|
PRINTF("nvm_read returned: 0x%02x\n\r",err);
|
|
|
|
for(j=0; j<4; j++) {
|
|
PRINTF("0x%08x\n\r",(unsigned int)buf[j]);
|
|
}
|
|
|
|
if(buf[0] == FLASH_INIT_MAGIC) {
|
|
len = buf[1] & 0x0000ffff;
|
|
while(i < (len-4)) {
|
|
err = nvm_read(gNvmInternalInterface_c, type, (uint8_t *)buf, addr+i, 32);
|
|
i += 4*exec_init_entry(buf, ram_values);
|
|
}
|
|
return i;
|
|
} else {
|
|
return 0;
|
|
}
|
|
|
|
}
|
|
|
|
/*
|
|
* Do the ABORT-Wait-NOP-Wait sequence in order to prevent MACA malfunctioning.
|
|
* This seqeunce is synchronous and no interrupts should be triggered when it is done.
|
|
*/
|
|
void ResumeMACASync(void)
|
|
{
|
|
volatile uint32_t clk, TsmRxSteps, LastWarmupStep, LastWarmupData, LastWarmdownStep, LastWarmdownData;
|
|
// bool_t tmpIsrStatus;
|
|
volatile uint32_t i;
|
|
safe_irq_disable(MACA);
|
|
|
|
// ITC_DisableInterrupt(gMacaInt_c);
|
|
// AppInterrupts_ProtectFromMACAIrq(tmpIsrStatus); <- Original from MAC code, but not sure how is it implemented
|
|
|
|
/* Manual TSM modem shutdown */
|
|
|
|
/* read TSM_RX_STEPS */
|
|
TsmRxSteps = (*((volatile uint32_t *)(0x80009204)));
|
|
|
|
/* isolate the RX_WU_STEPS */
|
|
/* shift left to align with 32-bit addressing */
|
|
LastWarmupStep = (TsmRxSteps & 0x1f) << 2;
|
|
/* Read "current" TSM step and save this value for later */
|
|
LastWarmupData = (*((volatile uint32_t *)(0x80009300 + LastWarmupStep)));
|
|
|
|
/* isolate the RX_WD_STEPS */
|
|
/* right-shift bits down to bit 0 position */
|
|
/* left-shift to align with 32-bit addressing */
|
|
LastWarmdownStep = ((TsmRxSteps & 0x1f00) >> 8) << 2;
|
|
/* write "last warmdown data" to current TSM step to shutdown rx */
|
|
LastWarmdownData = (*((volatile uint32_t *)(0x80009300 + LastWarmdownStep)));
|
|
(*((volatile uint32_t *)(0x80009300 + LastWarmupStep))) = LastWarmdownData;
|
|
|
|
/* Abort */
|
|
MACA_WRITE(maca_control, 1);
|
|
|
|
/* Wait ~8us */
|
|
for (clk = maca_clk, i = 0; maca_clk - clk < 3 && i < 300; i++)
|
|
;
|
|
|
|
/* NOP */
|
|
MACA_WRITE(maca_control, 0);
|
|
|
|
/* Wait ~8us */
|
|
for (clk = maca_clk, i = 0; maca_clk - clk < 3 && i < 300; i++)
|
|
;
|
|
|
|
|
|
/* restore original "last warmup step" data to TSM (VERY IMPORTANT!!!) */
|
|
(*((volatile uint32_t *)(0x80009300 + LastWarmupStep))) = LastWarmupData;
|
|
|
|
|
|
|
|
/* Clear all MACA interrupts - we should have gotten the ABORT IRQ */
|
|
MACA_WRITE(maca_clrirq, 0xFFFF);
|
|
|
|
// AppInterrupts_UnprotectFromMACAIrq(tmpIsrStatus); <- Original from MAC code, but not sure how is it implemented
|
|
// ITC_EnableInterrupt(gMacaInt_c);
|
|
// enable_irq(MACA);
|
|
irq_restore();
|
|
|
|
}
|