contiki/platform/nrf52dk/rtt/segger-rtt-printf.c
2016-02-15 09:37:38 +01:00

511 lines
15 KiB
C

/*********************************************************************
* SEGGER MICROCONTROLLER GmbH & Co. KG *
* Solutions for real time microcontroller applications *
**********************************************************************
* *
* (c) 2014 - 2015 SEGGER Microcontroller GmbH & Co. KG *
* *
* www.segger.com Support: support@segger.com *
* *
**********************************************************************
* *
* All rights reserved. *
* *
* * This software may in its unmodified form be freely redistributed *
* in source form. *
* * The source code may be modified, provided the source code *
* retains the above copyright notice, this list of conditions and *
* the following disclaimer. *
* * Modified versions of this software in source or linkable form *
* may not be distributed without prior consent of SEGGER. *
* * This software may only be used for communication with SEGGER *
* J-Link debug probes. *
* *
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND *
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, *
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF *
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE *
* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR *
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR *
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT *
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; *
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT *
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE *
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH *
* DAMAGE. *
* *
**********************************************************************
---------------------------END-OF-HEADER------------------------------
File : SEGGER_RTT_printf.c
Purpose : Replacement for printf to write formatted data via RTT
----------------------------------------------------------------------
*/
#include "segger-rtt.h"
#include "segger-rtt-conf.h"
/*********************************************************************
*
* Defines, configurable
*
**********************************************************************
*/
#ifndef SEGGER_RTT_PRINTF_BUFFER_SIZE
#define SEGGER_RTT_PRINTF_BUFFER_SIZE (64)
#endif
#include <stdlib.h>
#include <stdarg.h>
#define FORMAT_FLAG_LEFT_JUSTIFY (1u << 0)
#define FORMAT_FLAG_PAD_ZERO (1u << 1)
#define FORMAT_FLAG_PRINT_SIGN (1u << 2)
#define FORMAT_FLAG_ALTERNATE (1u << 3)
/*********************************************************************
*
* Types
*
**********************************************************************
*/
typedef struct {
char* pBuffer;
unsigned BufferSize;
unsigned Cnt;
int ReturnValue;
unsigned RTTBufferIndex;
} SEGGER_RTT_PRINTF_DESC;
/*********************************************************************
*
* Function prototypes
*
**********************************************************************
*/
int SEGGER_RTT_vprintf(unsigned BufferIndex, const char * sFormat, va_list * pParamList);
/*********************************************************************
*
* Static code
*
**********************************************************************
*/
/*********************************************************************
*
* _StoreChar
*/
static void _StoreChar(SEGGER_RTT_PRINTF_DESC * p, char c) {
unsigned Cnt;
Cnt = p->Cnt;
if ((Cnt + 1u) <= p->BufferSize) {
*(p->pBuffer + Cnt) = c;
p->Cnt = Cnt + 1u;
p->ReturnValue++;
}
//
// Write part of string, when the buffer is full
//
if (p->Cnt == p->BufferSize) {
if (SEGGER_RTT_Write(p->RTTBufferIndex, p->pBuffer, p->Cnt) != p->Cnt) {
p->ReturnValue = -1;
} else {
p->Cnt = 0u;
}
}
}
/*********************************************************************
*
* _PrintUnsigned
*/
static void _PrintUnsigned(SEGGER_RTT_PRINTF_DESC * pBufferDesc, unsigned v, unsigned Base, unsigned NumDigits, unsigned FieldWidth, unsigned FormatFlags) {
static const char _aV2C[16] = {'0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F' };
unsigned Div;
unsigned Digit;
unsigned Number;
unsigned Width;
char c;
Number = v;
Digit = 1u;
//
// Get actual field width
//
Width = 1u;
while (Number >= Base) {
Number = (Number / Base);
Width++;
}
if (NumDigits > Width) {
Width = NumDigits;
}
//
// Print leading chars if necessary
//
if ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == 0u) {
if (FieldWidth != 0u) {
if (((FormatFlags & FORMAT_FLAG_PAD_ZERO) == FORMAT_FLAG_PAD_ZERO) && (NumDigits == 0u)) {
c = '0';
} else {
c = ' ';
}
while ((FieldWidth != 0u) && (Width < FieldWidth)) {
FieldWidth--;
_StoreChar(pBufferDesc, c);
if (pBufferDesc->ReturnValue < 0) {
break;
}
}
}
}
if (pBufferDesc->ReturnValue >= 0) {
//
// Compute Digit.
// Loop until Digit has the value of the highest digit required.
// Example: If the output is 345 (Base 10), loop 2 times until Digit is 100.
//
while (1) {
if (NumDigits > 1u) { // User specified a min number of digits to print? => Make sure we loop at least that often, before checking anything else (> 1 check avoids problems with NumDigits being signed / unsigned)
NumDigits--;
} else {
Div = v / Digit;
if (Div < Base) { // Is our divider big enough to extract the highest digit from value? => Done
break;
}
}
Digit *= Base;
}
//
// Output digits
//
do {
Div = v / Digit;
v -= Div * Digit;
_StoreChar(pBufferDesc, _aV2C[Div]);
if (pBufferDesc->ReturnValue < 0) {
break;
}
Digit /= Base;
} while (Digit);
//
// Print trailing spaces if necessary
//
if ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == FORMAT_FLAG_LEFT_JUSTIFY) {
if (FieldWidth != 0u) {
while ((FieldWidth != 0u) && (Width < FieldWidth)) {
FieldWidth--;
_StoreChar(pBufferDesc, ' ');
if (pBufferDesc->ReturnValue < 0) {
break;
}
}
}
}
}
}
/*********************************************************************
*
* _PrintInt
*/
static void _PrintInt(SEGGER_RTT_PRINTF_DESC * pBufferDesc, int v, unsigned Base, unsigned NumDigits, unsigned FieldWidth, unsigned FormatFlags) {
unsigned Width;
int Number;
Number = (v < 0) ? -v : v;
//
// Get actual field width
//
Width = 1u;
while (Number >= (int)Base) {
Number = (Number / (int)Base);
Width++;
}
if (NumDigits > Width) {
Width = NumDigits;
}
if ((FieldWidth > 0u) && ((v < 0) || ((FormatFlags & FORMAT_FLAG_PRINT_SIGN) == FORMAT_FLAG_PRINT_SIGN))) {
FieldWidth--;
}
//
// Print leading spaces if necessary
//
if ((((FormatFlags & FORMAT_FLAG_PAD_ZERO) == 0u) || (NumDigits != 0u)) && ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == 0u)) {
if (FieldWidth != 0u) {
while ((FieldWidth != 0u) && (Width < FieldWidth)) {
FieldWidth--;
_StoreChar(pBufferDesc, ' ');
if (pBufferDesc->ReturnValue < 0) {
break;
}
}
}
}
//
// Print sign if necessary
//
if (pBufferDesc->ReturnValue >= 0) {
if (v < 0) {
v = -v;
_StoreChar(pBufferDesc, '-');
} else if ((FormatFlags & FORMAT_FLAG_PRINT_SIGN) == FORMAT_FLAG_PRINT_SIGN) {
_StoreChar(pBufferDesc, '+');
} else {
}
if (pBufferDesc->ReturnValue >= 0) {
//
// Print leading zeros if necessary
//
if (((FormatFlags & FORMAT_FLAG_PAD_ZERO) == FORMAT_FLAG_PAD_ZERO) && ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == 0u) && (NumDigits == 0u)) {
if (FieldWidth != 0u) {
while ((FieldWidth != 0u) && (Width < FieldWidth)) {
FieldWidth--;
_StoreChar(pBufferDesc, '0');
if (pBufferDesc->ReturnValue < 0) {
break;
}
}
}
}
if (pBufferDesc->ReturnValue >= 0) {
//
// Print number without sign
//
_PrintUnsigned(pBufferDesc, (unsigned)v, Base, NumDigits, FieldWidth, FormatFlags);
}
}
}
}
/*********************************************************************
*
* Public code
*
**********************************************************************
*/
/*********************************************************************
*
* SEGGER_RTT_vprintf
*
* Function description
* Stores a formatted string in SEGGER RTT control block.
* This data is read by the host.
*
* Parameters
* BufferIndex Index of "Up"-buffer to be used. (e.g. 0 for "Terminal")
* sFormat Pointer to format string
* pParamList Pointer to the list of arguments for the format string
*
* Return values
* >= 0: Number of bytes which have been stored in the "Up"-buffer.
* < 0: Error
*/
int SEGGER_RTT_vprintf(unsigned BufferIndex, const char * sFormat, va_list * pParamList) {
char c;
SEGGER_RTT_PRINTF_DESC BufferDesc;
int v;
unsigned NumDigits;
unsigned FormatFlags;
unsigned FieldWidth;
char acBuffer[SEGGER_RTT_PRINTF_BUFFER_SIZE];
BufferDesc.pBuffer = acBuffer;
BufferDesc.BufferSize = SEGGER_RTT_PRINTF_BUFFER_SIZE;
BufferDesc.Cnt = 0u;
BufferDesc.RTTBufferIndex = BufferIndex;
BufferDesc.ReturnValue = 0;
do {
c = *sFormat;
sFormat++;
if (c == 0u) {
break;
}
if (c == '%') {
//
// Filter out flags
//
FormatFlags = 0u;
v = 1;
do {
c = *sFormat;
switch (c) {
case '-': FormatFlags |= FORMAT_FLAG_LEFT_JUSTIFY; sFormat++; break;
case '0': FormatFlags |= FORMAT_FLAG_PAD_ZERO; sFormat++; break;
case '+': FormatFlags |= FORMAT_FLAG_PRINT_SIGN; sFormat++; break;
case '#': FormatFlags |= FORMAT_FLAG_ALTERNATE; sFormat++; break;
default: v = 0; break;
}
} while (v);
//
// filter out field with
//
FieldWidth = 0u;
do {
c = *sFormat;
if ((c < '0') || (c > '9')) {
break;
}
sFormat++;
FieldWidth = (FieldWidth * 10u) + ((unsigned)c - '0');
} while (1);
//
// Filter out precision (number of digits to display)
//
NumDigits = 0u;
c = *sFormat;
if (c == '.') {
sFormat++;
do {
c = *sFormat;
if (c == '*') {
sFormat++;
v = va_arg(*pParamList, int);
NumDigits = (unsigned)v;
break;
}
if ((c < '0') || (c > '9')) {
break;
}
sFormat++;
NumDigits = NumDigits * 10u + ((unsigned)c - '0');
} while (1);
}
//
// Filter out length modifier
//
c = *sFormat;
do {
if ((c == 'l') || (c == 'h')) {
c = *sFormat;
sFormat++;
} else {
break;
}
} while (1);
//
// Handle specifiers
//
switch (c) {
case 'c': {
char c0;
v = va_arg(*pParamList, int);
c0 = (char)v;
_StoreChar(&BufferDesc, c0);
break;
}
case 'd':
v = va_arg(*pParamList, int);
_PrintInt(&BufferDesc, v, 10u, NumDigits, FieldWidth, FormatFlags);
break;
case 'u':
v = va_arg(*pParamList, int);
_PrintUnsigned(&BufferDesc, (unsigned)v, 10u, NumDigits, FieldWidth, FormatFlags);
break;
case 'x':
case 'X':
v = va_arg(*pParamList, int);
_PrintUnsigned(&BufferDesc, (unsigned)v, 16u, NumDigits, FieldWidth, FormatFlags);
break;
case 's':
{
const char * s = va_arg(*pParamList, const char *);
if (NumDigits > 0) {
do {
c = *s;
s++;
if (NumDigits == 0) {
break;
}
NumDigits--;
_StoreChar(&BufferDesc, c);
} while (BufferDesc.ReturnValue >= 0);
} else {
do {
c = *s;
s++;
if (c == '\0' || NumDigits == 0) {
break;
}
_StoreChar(&BufferDesc, c);
} while (BufferDesc.ReturnValue >= 0);
}
}
break;
case 'p':
v = va_arg(*pParamList, int);
_PrintUnsigned(&BufferDesc, (unsigned)v, 16u, 8u, 8u, 0u);
break;
case '%':
_StoreChar(&BufferDesc, '%');
break;
default:
break;
}
sFormat++;
} else {
_StoreChar(&BufferDesc, c);
}
} while (BufferDesc.ReturnValue >= 0);
if (BufferDesc.ReturnValue > 0) {
//
// Write remaining data, if any
//
if (BufferDesc.Cnt != 0u) {
SEGGER_RTT_Write(BufferIndex, acBuffer, BufferDesc.Cnt);
}
BufferDesc.ReturnValue += (int)BufferDesc.Cnt;
}
return BufferDesc.ReturnValue;
}
/*********************************************************************
*
* SEGGER_RTT_printf
*
* Function description
* Stores a formatted string in SEGGER RTT control block.
* This data is read by the host.
*
* Parameters
* BufferIndex Index of "Up"-buffer to be used. (e.g. 0 for "Terminal")
* sFormat Pointer to format string, followed by the arguments for conversion
*
* Return values
* >= 0: Number of bytes which have been stored in the "Up"-buffer.
* < 0: Error
*
* Notes
* (1) Conversion specifications have following syntax:
* %[flags][FieldWidth][.Precision]ConversionSpecifier
* (2) Supported flags:
* -: Left justify within the field width
* +: Always print sign extension for signed conversions
* 0: Pad with 0 instead of spaces. Ignored when using '-'-flag or precision
* Supported conversion specifiers:
* c: Print the argument as one char
* d: Print the argument as a signed integer
* u: Print the argument as an unsigned integer
* x: Print the argument as an hexadecimal integer
* s: Print the string pointed to by the argument
* p: Print the argument as an 8-digit hexadecimal integer. (Argument shall be a pointer to void.)
*/
int SEGGER_RTT_printf(unsigned BufferIndex, const char * sFormat, ...) {
va_list ParamList;
va_start(ParamList, sFormat);
return SEGGER_RTT_vprintf(BufferIndex, sFormat, &ParamList);
}
/*************************** End of file ****************************/