contiki

mirror of https://github.com/oliverschmidt/contiki.git synced 2024-12-22 10:30:13 +00:00

History

Adam Dunkels 944537fccf Removed all old RCS tags in the Contiki source tree. Those RCS tags are not used any more, as we are now using git to manage the Contiki source tree		2012-10-26 15:54:49 +02:00
..
hello-world-example.csc	Hello, world example	2010-11-06 14:56:48 +00:00
hello-world.c	Removed all old RCS tags in the Contiki source tree. Those RCS tags are not used any more, as we are now using git to manage the Contiki source tree	2012-10-26 15:54:49 +02:00
Makefile	Add hello-world README	2010-12-03 16:39:56 +00:00
README	README additions	2010-12-03 20:45:35 +00:00

README

This adds the hello-world process in hello-world.c to the platform build,
which prints "Hello-world" to stdout on startup.

The entire platform is built, with uip stack, radio drivers, routing, etc.
So it is not usually a simple build! The native platform is the default:
 $make
 $./hello-world.native
Starting Contiki
Hello, world

When switching between ipv4 and ipv6 builds on a platform,
 $make TARGET=<platform> clean
else the library for that platform will contain duplicate or unresolved modules.

For example, using a loopback interface with the minimal-net platform:
[To install a loopback see http://www.sourceforge.net/apps/mediawiki/contiki/index.php?title=Capturing_loopback_traffic_with_Wireshark]
 $cd /examples/hello-world
 $make TARGET=minimal-net
 $./hello-world.minimal-net
Hello, world
IP Address:  10.1.1.1
Subnet Mask: 255.0.0.0
Def. Router: 10.1.1.100
^C
 $make TARGET=minimal-net clean
 $make UIP_CONF_IPV6=1 TARGET=minimal-net
 $./hello-world.minimal-net
Hello, world
IPV6 Address: [aaaa::206:98ff:fe00:232]
IPV6 Address: [fe80::206:98ff:fe00:232]
^C

Note to AVR Raven users: Output goes to UART1, not the LCD. To see it,
 $make TARGET=avr-raven hello-world.elf
Load the .elf in AVR Studio and connect a hapsim terminal to the 1284p simulation.