mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-12-23 01:29:33 +00:00
6db05caed9
The border-router tries to transmit and do other stuff after turning the radio off, and the radio driver didn't handle that very well. With this fix, it's no longer necessary to reset the border router after starting tunslip6.
160 lines
5.0 KiB
Markdown
160 lines
5.0 KiB
Markdown
Building Contiki for the EV-ADuCRF101MKxZ Board
|
|
===============================================
|
|
|
|
On Debian/Ubuntu Linux:
|
|
-----------------------
|
|
|
|
For older versions of Ubuntu (prior to 14.04), add the external
|
|
package repository that provides recent versions of GCC for ARM:
|
|
|
|
sudo add-apt-repository -y ppa:terry.guo/gcc-arm-embedded
|
|
sudo apt-get update
|
|
|
|
For all systems, install the required development packages:
|
|
|
|
sudo apt-get install git make gcc-arm-none-eabi python-serial
|
|
|
|
Obtain the Contiki source code:
|
|
|
|
git clone https://github.com/contiki-os/contiki.git
|
|
|
|
Build Contiki's `example-abc`:
|
|
|
|
make -C contiki/examples/rime \
|
|
TARGET=ev-aducrf101mkxz \
|
|
example-abc.ev-aducrf101mkxz.hex
|
|
|
|
The default radio frequency can optionally be specified on the
|
|
command-line as follows. A clean rebuild may be needed when changing
|
|
it:
|
|
|
|
make -C contiki/examples/rime \
|
|
TARGET=ev-aducrf101mkxz \
|
|
RF_CHANNEL=915000000 \
|
|
clean \
|
|
example-abc.ev-aducrf101mkxz.hex
|
|
|
|
The code can be flashed to the eval board and tested using
|
|
[adi-cm3sd](https://github.com/jimparis/adi-cm3sd.git). Obtain
|
|
`adi-cm3sd`:
|
|
|
|
git clone https://github.com/jimparis/adi-cm3sd.git
|
|
|
|
Connect the evaluation board using its J-Link board, or any other
|
|
serial adapter. Flash `example-adc` and open a terminal by running:
|
|
|
|
adi-cm3sd/cm3sd.py -a contiki/examples/rime/example-abc.ev-aducrf101mkxz.hex \
|
|
/dev/serial/by-id/usb-SEGGER_J-Link_000541011111-if00
|
|
|
|
replacing `/dev/serial/by-id/usb-SEGGER_J-Link_000541011111-if00` with
|
|
the path to the correct serial device. Flash the same code on a
|
|
second evaluation board to see them communicate.
|
|
|
|
### IPv6 Example ###
|
|
|
|
#### Border Router ####
|
|
|
|
First, build and run the IPv6 `border-router` example:
|
|
|
|
make -C contiki/examples/ipv6/rpl-border-router \
|
|
TARGET=ev-aducrf101mkxz \
|
|
SERIAL_ID='"00001234"' \
|
|
border-router.ev-aducrf101mkxz.hex
|
|
|
|
adi-cm3sd/cm3sd.py -a contiki/examples/ipv6/rpl-border-router/border-router.ev-aducrf101mkxz.hex \
|
|
/dev/serial/by-id/usb-SEGGER_J-Link_000541011111-if00
|
|
|
|
After flashing, close the terminal with `CTRL-C`, then build and run
|
|
the SLIP tunnel on the host machine:
|
|
|
|
make -C contiki/tools tunslip6
|
|
|
|
sudo contiki/tools/tunslip6 \
|
|
-s /dev/serial/by-id/usb-SEGGER_J-Link_000541011111-if00 \
|
|
-B 115200 -v3 aaaa::1/64
|
|
|
|
Open the border router's home page at: http://[aaaa::3230:3030:3132:3334]/
|
|
|
|
#### Web Server ####
|
|
|
|
Then, build and flash the IPv6 `webserver6` example on another eval
|
|
board. The different `SERIAL_ID` ensures that the webserver uses a
|
|
link-local IP address that is different from that of the border
|
|
router:
|
|
|
|
make -C contiki/examples/webserver-ipv6 \
|
|
TARGET=ev-aducrf101mkxz \
|
|
SERIAL_ID='"00005678"' \
|
|
webserver6.ev-aducrf101mkxz.hex
|
|
|
|
adi-cm3sd/cm3sd.py -a contiki/examples/webserver-ipv6/webserver6.ev-aducrf101mkxz.hex \
|
|
/dev/serial/by-id/usb-SEGGER_J-Link_000541022222-if00
|
|
|
|
Open the web server's home page at: http://[aaaa::3230:3030:3536:3738]/
|
|
|
|
On Windows:
|
|
-----------
|
|
|
|
### Install prerequisites ###
|
|
|
|
Install [git](http://git-scm.com/download/win/) with default options.
|
|
|
|
Install MinGW as follows:
|
|
|
|
* Download and run [mingw-get-setup.exe](https://sourceforge.net/projects/mingw/files/latest/download).
|
|
* Select `Install`, `Continue`, and `Continue` again.
|
|
* Click `Basic Setup` on the left panel.
|
|
* Click the checkbox next to `mingw32-base`, then click `Mark for Installation`.
|
|
* Select 'Installation -> Apply Changes' from the menu bar.
|
|
* Click 'Apply', then close and quit the MinGW installer.
|
|
|
|
### Install toolchain ###
|
|
|
|
Contiki can be built with either GCC or IAR:
|
|
|
|
* **GCC**: Install
|
|
[GNU Tools for ARM Embedded Processors](https://launchpad.net/gcc-arm-embedded/+download).
|
|
Use the "Windows installer" version. Ensure that "Add path to
|
|
environment variable" is selected in the installer.
|
|
|
|
* **IAR**: Install
|
|
[IAR Embedded Workbench](http://www.iar.com/ewarm/).
|
|
|
|
### Building `example-abc` ###
|
|
|
|
Open a shell by right-clicking the desktop or any folder and
|
|
selecting `Git Bash`.
|
|
|
|
Obtain the Contiki source code:
|
|
|
|
git clone https://github.com/contiki-os/contiki.git
|
|
|
|
Build Contiki's `example-abc`:
|
|
|
|
* **GCC**
|
|
|
|
/c/mingw/bin/mingw32-make -C contiki/examples/rime \
|
|
TARGET=ev-aducrf101mkxz \
|
|
example-abc.ev-aducrf101mkxz.hex
|
|
|
|
* **IAR**
|
|
|
|
/c/mingw/bin/mingw32-make -C contiki/examples/rime \
|
|
IAR=1 \
|
|
TARGET=ev-aducrf101mkxz \
|
|
example-abc.ev-aducrf101mkxz.hex
|
|
|
|
Other build options like `RF_CHANNEL` and `SERIAL_ID` can be specified
|
|
as in the Linux instructions above.
|
|
|
|
### Flashing and running ###
|
|
|
|
The resulting file
|
|
`contiki/examples/rime/example-abc.ev-aducrf101mkxz.hex` can be
|
|
flashed to the evaluation board using ADI's
|
|
[CM3WSD](http://www.analog.com/static/imported-files/eval_boards/CM3WSD.zip)
|
|
utility.
|
|
|
|
Use a terminal emulator (e.g. HyperTerminal) at 115200 baud to see the
|
|
program output.
|