Apple-2-SW/contiki
1
0
Fork 0
mirror of https://github.com/oliverschmidt/contiki.git synced 2024-12-22 10:30:13 +00:00
Code Issues Projects Releases Wiki Activity
4f1e251603
contiki/examples/cc2530dk/border-router
History
George Oikonomou ad256e5014 New platform: TI cc2530 Development Kit 
This commits adds support for TI's SmartRF05 Eval. Board with cc2530 EMs
Some initial support for cc2531 USB dongles
2012-03-23 14:41:07 +00:00
..
border-router.c New platform: TI cc2530 Development Kit 2012-03-23 14:41:07 +00:00
Makefile New platform: TI cc2530 Development Kit 2012-03-23 14:41:07 +00:00
Makefile.target New platform: TI cc2530 Development Kit 2012-03-23 14:41:07 +00:00
project-conf.h New platform: TI cc2530 Development Kit 2012-03-23 14:41:07 +00:00
README New platform: TI cc2530 Development Kit 2012-03-23 14:41:07 +00:00
slip-bridge.c New platform: TI cc2530 Development Kit 2012-03-23 14:41:07 +00:00

README 

border-router example for the TI SmartRF05EB with a cc2530EM.

This example is meant to be used with tunslip6 in tools/

- Build the code and load it onto your node
- Connect your node to your PC
- run:
  sudo ./tunslip6 -s /dev/ttyUSBx <address v6>/<prefix>
  
  This will setup tun0 on your PC over device /dev/ttyUSBx. The address
  argument should contain the v6 address that you want to assign to tun0
  The node will use this address to obtain the network prefix
  
  for example:
  sudo ./tunslip6 aaaa::1/64
  This will use aaaa:: / 64 as the prefix for the 15.4 network.