mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-12-22 10:30:13 +00:00
792eae91c6
sprintf that use strformat, so there's no need to pull in the newlib implementation. Build system improvements.
518 lines
16 KiB
ArmAsm
518 lines
16 KiB
ArmAsm
/***********************************************************************/
|
|
/* */
|
|
/* startup_SAM7S.S: Startup file for Atmel AT91SAM7S device series */
|
|
/* */
|
|
/***********************************************************************/
|
|
/* ported to arm-elf-gcc / WinARM by Martin Thomas, KL, .de */
|
|
/* <eversmith@heizung-thomas.de> */
|
|
/* modifications Copyright Martin Thomas 2005 */
|
|
/* */
|
|
/* Based on a file that has been a part of the uVision/ARM */
|
|
/* development tools, Copyright KEIL ELEKTRONIK GmbH 2002-2004 */
|
|
/***********************************************************************/
|
|
|
|
/*
|
|
Modifications by Martin Thomas:
|
|
- added handling of execption vectors in RAM ("ramfunc")
|
|
- added options to remap the interrupt vectors to RAM
|
|
(see makefile for switch-option)
|
|
- replaced all ";" and "#" for comments with // or / * * /
|
|
- added C++ ctor handling
|
|
- .text in RAM for debugging (RAM_RUN)
|
|
*/
|
|
/*
|
|
Modifications by Simon Berg
|
|
- added stack segment
|
|
- running program as system by defining RUN_AS_SYSTEM
|
|
*/
|
|
|
|
// mt: this file should not be used with the Configuration Wizard
|
|
// since a lot of changes have been done for the WinARM/gcc example
|
|
/*
|
|
// *** <<< Use Configuration Wizard in Context Menu >>> ***
|
|
*/
|
|
|
|
|
|
|
|
// *** Startup Code (executed after Reset) ***
|
|
|
|
|
|
// Standard definitions of Mode bits and Interrupt (I & F) flags in PSRs
|
|
|
|
.equ Mode_USR, 0x10
|
|
.equ Mode_FIQ, 0x11
|
|
.equ Mode_IRQ, 0x12
|
|
.equ Mode_SVC, 0x13
|
|
.equ Mode_ABT, 0x17
|
|
.equ Mode_UND, 0x1B
|
|
.equ Mode_SYS, 0x1F
|
|
|
|
.equ I_Bit, 0x80 /* when I bit is set, IRQ is disabled */
|
|
.equ F_Bit, 0x40 /* when F bit is set, FIQ is disabled */
|
|
|
|
|
|
// Internal Memory Base Addresses
|
|
.equ FLASH_BASE, 0x00100000
|
|
.equ RAM_BASE, 0x00200000
|
|
|
|
|
|
/*
|
|
// <h> Stack Configuration
|
|
// <o> Top of Stack Address <0x0-0xFFFFFFFF:4>
|
|
// <h> Stack Sizes (in Bytes)
|
|
// <o1> Undefined Mode <0x0-0xFFFFFFFF:4>
|
|
// <o2> Supervisor Mode <0x0-0xFFFFFFFF:4>
|
|
// <o3> Abort Mode <0x0-0xFFFFFFFF:4>
|
|
// <o4> Fast Interrupt Mode <0x0-0xFFFFFFFF:4>
|
|
// <o5> Interrupt Mode <0x0-0xFFFFFFFF:4>
|
|
// <o6> User/System Mode <0x0-0xFFFFFFFF:4>
|
|
// </h>
|
|
// </h>
|
|
*/
|
|
.equ Top_Stack, 0x00204000
|
|
.equ UND_Stack_Size, 0x00000004
|
|
.equ SVC_Stack_Size, 0x00000200
|
|
.equ ABT_Stack_Size, 0x00000004
|
|
.equ FIQ_Stack_Size, 0x00000004
|
|
.equ IRQ_Stack_Size, 0x00000400
|
|
.equ USR_Stack_Size, 0x00000400
|
|
|
|
|
|
.bss
|
|
.section .stack , "aw", %nobits
|
|
|
|
USR_Stack_Start:
|
|
.skip USR_Stack_Size
|
|
USR_Stack_End:
|
|
IRQ_Stack_Start:
|
|
.skip IRQ_Stack_Size
|
|
IRQ_Stack_End:
|
|
FIQ_Stack_Start:
|
|
.skip FIQ_Stack_Size
|
|
FIQ_Stack_End:
|
|
ABT_Stack_Start:
|
|
.skip ABT_Stack_Size
|
|
ABT_Stack_End:
|
|
SVC_Stack_Start:
|
|
.skip SVC_Stack_Size
|
|
SVC_Stack_End:
|
|
UND_Stack_Start:
|
|
.skip UND_Stack_Size
|
|
UND_Stack_End:
|
|
|
|
// Embedded Flash Controller (EFC) definitions
|
|
.equ EFC_BASE, 0xFFFFFF00 /* EFC Base Address */
|
|
.equ EFC_FMR, 0x60 /* EFC_FMR Offset */
|
|
|
|
/*
|
|
// <e> Embedded Flash Controller (EFC)
|
|
// <o1.16..23> FMCN: Flash Microsecond Cycle Number <0-255>
|
|
// <i> Number of Master Clock Cycles in 1us
|
|
// <o1.8..9> FWS: Flash Wait State
|
|
// <0=> Read: 1 cycle / Write: 2 cycles
|
|
// <1=> Read: 2 cycle / Write: 3 cycles
|
|
// <2=> Read: 3 cycle / Write: 4 cycles
|
|
// <3=> Read: 4 cycle / Write: 4 cycles
|
|
// </e>
|
|
*/
|
|
.equ EFC_SETUP, 1
|
|
.equ EFC_FMR_Val, 0x00320100
|
|
|
|
|
|
// Watchdog Timer (WDT) definitions
|
|
.equ WDT_BASE, 0xFFFFFD40 /* WDT Base Address */
|
|
.equ WDT_MR, 0x04 /* WDT_MR Offset */
|
|
|
|
/*
|
|
// <e> Watchdog Timer (WDT)
|
|
// <o1.0..11> WDV: Watchdog Counter Value <0-4095>
|
|
// <o1.16..27> WDD: Watchdog Delta Value <0-4095>
|
|
// <o1.12> WDFIEN: Watchdog Fault Interrupt Enable
|
|
// <o1.13> WDRSTEN: Watchdog Reset Enable
|
|
// <o1.14> WDRPROC: Watchdog Reset Processor
|
|
// <o1.28> WDDBGHLT: Watchdog Debug Halt
|
|
// <o1.29> WDIDLEHLT: Watchdog Idle Halt
|
|
// <o1.15> WDDIS: Watchdog Disable
|
|
// </e>
|
|
*/
|
|
.equ WDT_SETUP, 1
|
|
.equ WDT_MR_Val, 0x00008000 // Disable watchdog
|
|
|
|
|
|
// Power Mangement Controller (PMC) definitions
|
|
.equ PMC_BASE, 0xFFFFFC00 /* PMC Base Address */
|
|
.equ PMC_MOR, 0x20 /* PMC_MOR Offset */
|
|
.equ PMC_MCFR, 0x24 /* PMC_MCFR Offset */
|
|
.equ PMC_PLLR, 0x2C /* PMC_PLLR Offset */
|
|
.equ PMC_MCKR, 0x30 /* PMC_MCKR Offset */
|
|
.equ PMC_SR, 0x68 /* PMC_SR Offset */
|
|
.equ PMC_MOSCEN, (1<<0) /* Main Oscillator Enable */
|
|
.equ PMC_OSCBYPASS, (1<<1) /* Main Oscillator Bypass */
|
|
.equ PMC_OSCOUNT, (0xFF<<8) /* Main OScillator Start-up Time */
|
|
.equ PMC_DIV, (0xFF<<0) /* PLL Divider */
|
|
.equ PMC_PLLCOUNT, (0x3F<<8) /* PLL Lock Counter */
|
|
.equ PMC_OUT, (0x03<<14) /* PLL Clock Frequency Range */
|
|
.equ PMC_MUL, (0x7FF<<16) /* PLL Multiplier */
|
|
.equ PMC_USBDIV, (0x03<<28) /* USB Clock Divider */
|
|
.equ PMC_CSS, (3<<0) /* Clock Source Selection */
|
|
.equ PMC_PRES, (7<<2) /* Prescaler Selection */
|
|
.equ PMC_MOSCS, (1<<0) /* Main Oscillator Stable */
|
|
.equ PMC_LOCK, (1<<2) /* PLL Lock Status */
|
|
|
|
/*
|
|
// <e> Power Mangement Controller (PMC)
|
|
// <h> Main Oscillator
|
|
// <o1.0> MOSCEN: Main Oscillator Enable
|
|
// <o1.1> OSCBYPASS: Oscillator Bypass
|
|
// <o1.8..15> OSCCOUNT: Main Oscillator Startup Time <0-255>
|
|
// </h>
|
|
// <h> Phase Locked Loop (PLL)
|
|
// <o2.0..7> DIV: PLL Divider <0-255>
|
|
// <o2.16..26> MUL: PLL Multiplier <0-2047>
|
|
// <i> PLL Output is multiplied by MUL+1
|
|
// <o2.14..15> OUT: PLL Clock Frequency Range
|
|
// <0=> 80..160MHz <1=> Reserved
|
|
// <2=> 150..220MHz <3=> Reserved
|
|
// <o2.8..13> PLLCOUNT: PLL Lock Counter <0-63>
|
|
// <o2.28..29> USBDIV: USB Clock Divider
|
|
// <0=> None <1=> 2 <2=> 4 <3=> Reserved
|
|
// </h>
|
|
// <o3.0..1> CSS: Clock Source Selection
|
|
// <0=> Slow Clock
|
|
// <1=> Main Clock
|
|
// <2=> Reserved
|
|
// <3=> PLL Clock
|
|
// <o3.2..4> PRES: Prescaler
|
|
// <0=> None
|
|
// <1=> Clock / 2 <2=> Clock / 4
|
|
// <3=> Clock / 8 <4=> Clock / 16
|
|
// <5=> Clock / 32 <6=> Clock / 64
|
|
// <7=> Reserved
|
|
// </e>
|
|
*/
|
|
.equ PMC_SETUP, 1
|
|
.equ PMC_MOR_Val, 0x00000601 /* Enable main oscilator,
|
|
48 cycles startup */
|
|
.equ PMC_PLLR_Val, 0x00191C05 /* 28 cycles startup,
|
|
PLL = 5.2* * main clock */
|
|
.equ PMC_MCKR_Val, 0x0000000B /* MCK = PLL/4 */
|
|
|
|
/* Reset controller */
|
|
.equ RSTC_BASE, 0xfffffd00
|
|
.equ RSTC_CR, 0x00
|
|
.equ RSTC_SR, 0x04
|
|
.equ RSTC_MR, 0x08
|
|
|
|
.equ RSTC_SETUP, 1
|
|
.equ RSTC_MR_Val, 0xa5000001 /* Enable user reset */
|
|
|
|
|
|
/* Advanced interrupt controller */
|
|
.equ AIC_SETUP, 1
|
|
.equ AIC_BASE, 0xfffff000
|
|
.equ AIC_EOICR, 0x130
|
|
.equ AIC_SPU, 0x134
|
|
|
|
#if (defined(VECTORS_IN_RAM) && defined(ROM_RUN)) || defined(USE_SAMBA)
|
|
|
|
/*
|
|
Exception Vectors to be placed in RAM - added by mt
|
|
-> will be used after remapping in ROM_RUN
|
|
-> not needed for RAM_RUN
|
|
-> moved to address 0 after remapping
|
|
Mapped to Address 0 after remapping in ROM_RUN
|
|
Absolute addressing mode must be used.
|
|
Dummy Handlers are implemented as infinite loops which can be modified.
|
|
VECTORS_IN_RAM defined in makefile/by commandline
|
|
*/
|
|
.text
|
|
.arm
|
|
.section .vectram, "ax"
|
|
|
|
VectorsRAM: LDR PC,Reset_AddrR
|
|
LDR PC,Undef_AddrR
|
|
LDR PC,SWI_AddrR
|
|
LDR PC,PAbt_AddrR
|
|
LDR PC,DAbt_AddrR
|
|
NOP /* Reserved Vector */
|
|
LDR PC,[PC,#-0xF20] /* Vector From AIC_IVR */
|
|
LDR PC,[PC,#-0xF20] /* Vector From AIC_FVR */
|
|
|
|
Reset_AddrR: .word Reset_Handler
|
|
Undef_AddrR: .word Undef_HandlerR
|
|
SWI_AddrR: .word SWI_HandlerR
|
|
PAbt_AddrR: .word PAbt_HandlerR
|
|
DAbt_AddrR: .word DAbt_HandlerR
|
|
// .word 0xdeadbeef /* Test Reserved Address */
|
|
.word 0 /* Reserved Address */
|
|
IRQ_AddrR: .word IRQ_HandlerR
|
|
FIQ_AddrR: .word FIQ_HandlerR
|
|
|
|
Undef_HandlerR: B Undef_HandlerR
|
|
SWI_HandlerR: B SWI_HandlerR
|
|
PAbt_HandlerR: B PAbt_HandlerR
|
|
DAbt_HandlerR: B DAbt_HandlerR
|
|
IRQ_HandlerR: B IRQ_HandlerR
|
|
FIQ_HandlerR: B FIQ_HandlerR
|
|
|
|
VectorsRAM_end:
|
|
#endif /* VECTORS_IN_RAM && ROM_RUN */
|
|
|
|
|
|
|
|
#ifndef USE_SAMBA
|
|
|
|
/*
|
|
Exception Vectors
|
|
- for ROM_RUN: placed in 0x00000000
|
|
- for RAM_RUN: placed at 0x00200000 (on AT91SAM7S64)
|
|
- for USE_SAMBA: not used
|
|
-> will be used during startup before remapping with target ROM_RUN
|
|
-> will be used "always" in code without remapping or with target RAM_RUN
|
|
Mapped to Address relative address 0 of .text
|
|
Absolute addressing mode must be used.
|
|
Dummy Handlers are implemented as infinite loops which can be modified.
|
|
*/
|
|
.text
|
|
.arm
|
|
.section .vectrom, "ax"
|
|
|
|
Vectors: LDR PC,Reset_Addr
|
|
LDR PC,Undef_Addr
|
|
LDR PC,SWI_Addr
|
|
LDR PC,PAbt_Addr
|
|
LDR PC,DAbt_Addr
|
|
NOP /* Reserved Vector */
|
|
// LDR PC,IRQ_Addr
|
|
LDR PC,[PC,#-0xF20] /* Vector From AIC_IVR */
|
|
// LDR PC,FIQ_Addr
|
|
LDR PC,[PC,#-0xF20] /* Vector From AIC_FVR */
|
|
|
|
Reset_Addr: .word Reset_Handler
|
|
Undef_Addr: .word Undef_Handler
|
|
SWI_Addr: .word SWI_Handler
|
|
PAbt_Addr: .word PAbt_Handler
|
|
DAbt_Addr: .word DAbt_Handler
|
|
.word 0 /* Reserved Address */
|
|
IRQ_Addr: .word IRQ_Handler
|
|
FIQ_Addr: .word FIQ_Handler
|
|
|
|
Undef_Handler: B Undef_Handler
|
|
SWI_Handler: B SWI_Handler
|
|
PAbt_Handler: B PAbt_Handler
|
|
DAbt_Handler: B DAbt_Handler
|
|
IRQ_Handler: B IRQ_Handler
|
|
FIQ_Handler: B FIQ_Handler
|
|
|
|
#endif
|
|
|
|
// Spurious interrupt handler
|
|
SPU_Handler:
|
|
STMDB SP!, {R0}
|
|
LDR R0, =AIC_BASE
|
|
STR R0, [R0, #AIC_EOICR]
|
|
LDMIA SP!, {R0}
|
|
SUBS PC, LR, #4
|
|
|
|
|
|
// Starupt Code must be linked first at Address at which it expects to run.
|
|
|
|
.text
|
|
.arm
|
|
.section .init, "ax"
|
|
|
|
.global _startup
|
|
.func _startup
|
|
_startup:
|
|
|
|
|
|
// Reset Handler
|
|
LDR pc, =Reset_Handler
|
|
Reset_Handler:
|
|
|
|
// Setup EFC
|
|
.if EFC_SETUP
|
|
LDR R0, =EFC_BASE
|
|
LDR R1, =EFC_FMR_Val
|
|
STR R1, [R0, #EFC_FMR]
|
|
.endif
|
|
|
|
|
|
// Setup WDT
|
|
.if WDT_SETUP
|
|
LDR R0, =WDT_BASE
|
|
LDR R1, =WDT_MR_Val
|
|
STR R1, [R0, #WDT_MR]
|
|
.endif
|
|
|
|
// Setup reset controller
|
|
.if RSTC_SETUP
|
|
LDR R0, =RSTC_BASE
|
|
LDR R1, =RSTC_MR_Val
|
|
STR R1, [R0, #RSTC_MR]
|
|
.endif
|
|
|
|
// Setup PMC
|
|
.if PMC_SETUP
|
|
LDR R0, =PMC_BASE
|
|
|
|
// Setup Main Oscillator
|
|
LDR R1, =PMC_MOR_Val
|
|
STR R1, [R0, #PMC_MOR]
|
|
|
|
// Wait until Main Oscillator is stablilized
|
|
.if (PMC_MOR_Val & PMC_MOSCEN)
|
|
MOSCS_Loop: LDR R2, [R0, #PMC_SR]
|
|
ANDS R2, R2, #PMC_MOSCS
|
|
BEQ MOSCS_Loop
|
|
.endif
|
|
|
|
// Setup the PLL
|
|
.if (PMC_PLLR_Val & PMC_MUL)
|
|
LDR R1, =PMC_PLLR_Val
|
|
STR R1, [R0, #PMC_PLLR]
|
|
|
|
// Wait until PLL is stabilized
|
|
PLL_Loop: LDR R2, [R0, #PMC_SR]
|
|
ANDS R2, R2, #PMC_LOCK
|
|
BEQ PLL_Loop
|
|
.endif
|
|
|
|
// Select Clock
|
|
LDR R1, =PMC_MCKR_Val
|
|
STR R1, [R0, #PMC_MCKR]
|
|
.endif
|
|
|
|
|
|
// Setup Stack for each mode
|
|
|
|
LDR R0, =Top_Stack
|
|
|
|
// Enter Undefined Instruction Mode and set its Stack Pointer
|
|
MSR CPSR_c, #Mode_UND|I_Bit|F_Bit
|
|
LDR SP, =UND_Stack_End
|
|
|
|
// Enter Abort Mode and set its Stack Pointer
|
|
MSR CPSR_c, #Mode_ABT|I_Bit|F_Bit
|
|
LDR SP, =ABT_Stack_End
|
|
|
|
// Enter FIQ Mode and set its Stack Pointer
|
|
MSR CPSR_c, #Mode_FIQ|I_Bit|F_Bit
|
|
LDR SP, =FIQ_Stack_End
|
|
|
|
// Enter IRQ Mode and set its Stack Pointer
|
|
MSR CPSR_c, #Mode_IRQ|I_Bit|F_Bit
|
|
LDR SP, =IRQ_Stack_End
|
|
|
|
// Enter Supervisor Mode and set its Stack Pointer
|
|
MSR CPSR_c, #Mode_SVC|I_Bit|F_Bit
|
|
LDR SP, =SVC_Stack_End
|
|
|
|
// Enter User Mode and set its Stack Pointer
|
|
#ifdef RUN_AS_SYSTEM
|
|
MSR CPSR_c, #Mode_SYS
|
|
#else
|
|
MSR CPSR_c, #Mode_USR
|
|
#endif
|
|
LDR SP, =USR_Stack_End
|
|
|
|
// Setup a default Stack Limit (when compiled with "-mapcs-stack-check")
|
|
LDR SL, =USR_Stack_End
|
|
|
|
#ifdef ROM_RUN
|
|
// Relocate .data section (Copy from ROM to RAM)
|
|
LDR R1, =_etext
|
|
LDR R2, =_data
|
|
LDR R3, =_edata
|
|
LoopRel: CMP R2, R3
|
|
LDRLO R0, [R1], #4
|
|
STRLO R0, [R2], #4
|
|
BLO LoopRel
|
|
#endif
|
|
|
|
|
|
// Clear .bss section (Zero init)
|
|
MOV R0, #0
|
|
LDR R1, =__bss_start__
|
|
LDR R2, =__bss_end__
|
|
LoopZI: CMP R1, R2
|
|
STRLO R0, [R1], #4
|
|
BLO LoopZI
|
|
|
|
|
|
#if defined(VECTORS_IN_RAM) || defined(RAM_RUN)
|
|
/*
|
|
*** Remap ***
|
|
ROM_RUN: exception vectors for RAM have been already copied
|
|
to 0x00200000 by the .data copy-loop
|
|
RAM_RUN: exception vectors are already placed at 0x0020000 by
|
|
linker settings
|
|
*/
|
|
.equ MC_BASE,0xFFFFFF00 /* MC Base Address */
|
|
.equ MC_RCR, 0x00 /* MC_RCR Offset */
|
|
|
|
LDR R0, =MC_BASE
|
|
MOV R1, #1
|
|
STR R1, [R0, #MC_RCR] // Remap
|
|
#endif /* VECTORS_IN_RAM || RAM_RUN */
|
|
|
|
#ifdef USE_SAMBA
|
|
// Copy interrupt vectors to RAM, that has previously been mapped to 0
|
|
MOV R1, #0
|
|
LDR R2, = VectorsRAM
|
|
LDR R3, = VectorsRAM_end
|
|
LoopVectCopy: CMP R2, R3
|
|
LDRLO R0, [R2], #4
|
|
STRLO R0, [R1], #4
|
|
BLO LoopVectCopy
|
|
#endif
|
|
|
|
.if AIC_SETUP
|
|
LDR R1, =AIC_BASE
|
|
LDR R0, = SPU_Handler
|
|
STR R0, [R1, #AIC_SPU]
|
|
.endif
|
|
|
|
/*
|
|
Call C++ constructors (for objects in "global scope")
|
|
added by Martin Thomas based on a Anglia Design
|
|
example-application for STR7 ARM
|
|
*/
|
|
|
|
LDR r0, =__ctors_start__
|
|
LDR r1, =__ctors_end__
|
|
ctor_loop:
|
|
CMP r0, r1
|
|
BEQ ctor_end
|
|
LDR r2, [r0], #4 /* this ctor's address */
|
|
STMFD sp!, {r0-r1} /* save loop counters */
|
|
MOV lr, pc /* set return address */
|
|
// MOV pc, r2
|
|
BX r2 /* call ctor */
|
|
LDMFD sp!, {r0-r1} /* restore loop counters */
|
|
B ctor_loop
|
|
ctor_end:
|
|
|
|
|
|
// Enter the C code
|
|
mov r0,#0 // no arguments (argc = 0)
|
|
mov r1,r0
|
|
mov r2,r0
|
|
mov fp,r0 // null frame pointer
|
|
mov r7,r0 // null frame pointer for thumb
|
|
ldr r10,=main
|
|
adr lr, __main_exit
|
|
bx r10 // enter main()
|
|
|
|
__main_exit: B __main_exit
|
|
|
|
|
|
.size _startup, . - _startup
|
|
.endfunc
|
|
|
|
.end
|
|
|
|
|
|
|
|
|