mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-11-17 05:10:54 +00:00
75 lines
1.6 KiB
C
75 lines
1.6 KiB
C
/**
|
|
* \file
|
|
*
|
|
* uart0 write routines
|
|
*
|
|
* \author
|
|
*
|
|
* Anthony "Asterisk" Ambuehl
|
|
*
|
|
*/
|
|
#include <stdlib.h>
|
|
#include <string.h>
|
|
|
|
#include "cc253x.h"
|
|
#include "sfr-bits.h"
|
|
#include "dev/uart0.h"
|
|
|
|
#if UART0_ENABLE
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
uart0_init()
|
|
{
|
|
#if UART0_CONF_HIGH_SPEED
|
|
UART_SET_SPEED(0, UART_460_M, UART_460_E);
|
|
#else
|
|
UART_SET_SPEED(0, UART_115_M, UART_115_E);
|
|
#endif
|
|
|
|
#ifdef UART0_ALTERNATIVE_2
|
|
PERCFG |= PERCFG_U0CFG; /* alternative port 2 = P1.5-2 */
|
|
#ifdef UART0_RTSCTS
|
|
P1SEL |= 0x3C; /* peripheral select for TX and RX, RTS, CTS */
|
|
#else
|
|
P1SEL |= 0x30; /* peripheral select for TX and RX */
|
|
P1 &= ~0x08; /* RTS down */
|
|
#endif
|
|
P1DIR |= 0x28; /* RTS, TX out */
|
|
P1DIR &= ~0x14; /* CTS & RX in */
|
|
#else
|
|
PERCFG &= ~PERCFG_U0CFG; /* alternative port 1 = P0.5-2 */
|
|
#ifdef UART0_RTSCTS
|
|
P0SEL |= 0x3C; /* peripheral select for RTS and CTS, TX, RX */
|
|
#else
|
|
P0SEL |= 0x0C; /* peripheral select for TX and RX */
|
|
P0 &= ~0x20; /* RTS down */
|
|
#endif
|
|
P0DIR |= 0x28; /* RTS, TX out */
|
|
P0DIR &= ~0x14; /* CTS, RX in */
|
|
#endif
|
|
|
|
|
|
#ifdef UART0_RTSCTS
|
|
U0UCR = 0x42; /*defaults: 8N1, RTS/CTS, high stop bit*/
|
|
#else
|
|
U0UCR = 0x02; /*defaults: 8N1, no flow control, high stop bit*/
|
|
#endif
|
|
|
|
U0CSR = UCSR_MODE; /* UART mode */
|
|
U0UCR |= 0x80; /* Flush */
|
|
UART0_RX_EN();
|
|
|
|
UART0_RX_INT(1);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Write one byte over the UART. */
|
|
void
|
|
uart0_writeb(uint8_t byte)
|
|
{
|
|
UTX0IF = 0;
|
|
U0DBUF = byte;
|
|
while(!UTX0IF); /* Wait until byte has been transmitted. */
|
|
UTX0IF = 0;
|
|
}
|
|
#endif
|