mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-09-09 23:54:32 +00:00
This patch adds gpio-pcal9535a.c and gpio-pcal9535a.h files, which support access to I2C-based PCAL9535A GPIO controller configuration register through a function interface. The PCAL9535A is a low-voltage 16-bit GPIO expander with interrupt and reset for I2C-bus/SMBus applications. It contains the PCA9535 register set of four pairs of 8-bit Configuration, Input, Output, and Polarity Inversion registers, and additionally, the PCAL9535A has Agile I/O, which are additional features specifically designed to enhance the I/O. More about PCAL9535A can be found in its datasheet[1]. This driver is needed in order to configure Galileo pinmux. [1] - http://www.nxp.com/documents/data_sheet/PCAL9535A.pdf
345 lines
9.1 KiB
C
345 lines
9.1 KiB
C
/*
|
|
* Copyright (C) 2015, Intel Corporation. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* 3. Neither the name of the copyright holder nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
|
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include "contiki.h"
|
|
#include "gpio.h"
|
|
#include "gpio-pcal9535a.h"
|
|
#include "i2c.h"
|
|
#include "stdio.h"
|
|
|
|
#define REG_INPUT_PORT0 0x00
|
|
#define REG_INPUT_PORT1 0x01
|
|
#define REG_OUTPUT_PORT0 0x02
|
|
#define REG_OUTPUT_PORT1 0x03
|
|
#define REG_POL_INV_PORT0 0x04
|
|
#define REG_POL_INV_PORT1 0x05
|
|
#define REG_CONF_PORT0 0x06
|
|
#define REG_CONG_PORT1 0x07
|
|
#define REG_OUT_DRV_STRENGTH_PORT0_L 0x40
|
|
#define REG_OUT_DRV_STRENGTH_PORT0_H 0x41
|
|
#define REG_OUT_DRV_STRENGTH_PORT1_L 0x42
|
|
#define REG_OUT_DRV_STRENGTH_PORT1_H 0x43
|
|
#define REG_INPUT_LATCH_PORT0 0x44
|
|
#define REG_INPUT_LATCH_PORT1 0x45
|
|
#define REG_PUD_EN_PORT0 0x46
|
|
#define REG_PUD_EN_PORT1 0x47
|
|
#define REG_PUD_SEL_PORT0 0x48
|
|
#define REG_PUD_SEL_PORT1 0x49
|
|
#define REG_INT_MASK_PORT0 0x4A
|
|
#define REG_INT_MASK_PORT1 0x4B
|
|
#define REG_INT_STATUS_PORT0 0x4C
|
|
#define REG_INT_STATUS_PORT1 0x4D
|
|
#define REG_OUTPUT_PORT_CONF 0x4F
|
|
|
|
#define READ_PORT_TIMEOUT (CLOCK_SECOND / 100)
|
|
#define READ_PORT_TRIES 5
|
|
|
|
static int
|
|
read_port_regs(struct gpio_pcal9535a_data *data, uint8_t reg, union gpio_pcal9535a_port_data *buf)
|
|
{
|
|
int r;
|
|
uint8_t tries = READ_PORT_TRIES;
|
|
|
|
buf->byte[0] = reg;
|
|
buf->byte[1] = 0;
|
|
|
|
if (quarkX1000_i2c_write(buf->byte, 1, data->i2c_slave_addr) < 0)
|
|
return -1;
|
|
|
|
do {
|
|
clock_wait(READ_PORT_TIMEOUT);
|
|
|
|
r = quarkX1000_i2c_read(buf->byte, 2, data->i2c_slave_addr);
|
|
if (r == 0)
|
|
break;
|
|
} while (tries--);
|
|
|
|
if (r < 0)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
write_port_regs(struct gpio_pcal9535a_data *data, uint8_t reg, union gpio_pcal9535a_port_data *buf)
|
|
{
|
|
uint8_t cmd[] = {reg, buf->byte[0], buf->byte[1]};
|
|
|
|
if (quarkX1000_i2c_polling_write(cmd, sizeof(cmd), data->i2c_slave_addr) < 0)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
setup_pin_dir(struct gpio_pcal9535a_data *data, uint32_t pin, int flags)
|
|
{
|
|
union gpio_pcal9535a_port_data *port = &data->reg_cache.dir;
|
|
uint16_t bit_mask, new_value = 0;
|
|
|
|
bit_mask = 1 << pin;
|
|
|
|
if ((flags & QUARKX1000_GPIO_DIR_MASK) == QUARKX1000_GPIO_IN)
|
|
new_value = 1 << pin;
|
|
|
|
port->all &= ~bit_mask;
|
|
port->all |= new_value;
|
|
|
|
return write_port_regs(data, REG_CONF_PORT0, port);
|
|
}
|
|
|
|
static int
|
|
setup_pin_pullupdown(struct gpio_pcal9535a_data *data, uint32_t pin, int flags)
|
|
{
|
|
union gpio_pcal9535a_port_data *port;
|
|
uint16_t bit_mask, new_value = 0;
|
|
|
|
if ((flags & QUARKX1000_GPIO_PUD_MASK) != QUARKX1000_GPIO_PUD_NORMAL) {
|
|
port = &data->reg_cache.pud_sel;
|
|
bit_mask = 1 << pin;
|
|
|
|
if ((flags & QUARKX1000_GPIO_PUD_MASK) == QUARKX1000_GPIO_PUD_PULL_UP)
|
|
new_value = 1 << pin;
|
|
|
|
port->all &= ~bit_mask;
|
|
port->all |= new_value;
|
|
|
|
if (write_port_regs(data, REG_PUD_SEL_PORT0, port) < 0)
|
|
return -1;
|
|
}
|
|
|
|
port = &data->reg_cache.pud_en;
|
|
bit_mask = 1 << pin;
|
|
|
|
if ((flags & QUARKX1000_GPIO_PUD_MASK) != QUARKX1000_GPIO_PUD_NORMAL)
|
|
new_value = 1 << pin;
|
|
|
|
port->all &= ~bit_mask;
|
|
port->all |= new_value;
|
|
|
|
return write_port_regs(data, REG_PUD_EN_PORT0, port);
|
|
}
|
|
|
|
static int
|
|
setup_pin_polarity(struct gpio_pcal9535a_data *data, uint32_t pin, int flags)
|
|
{
|
|
union gpio_pcal9535a_port_data *port = &data->reg_cache.pol_inv;
|
|
uint16_t bit_mask, new_value = 0;
|
|
|
|
bit_mask = 1 << pin;
|
|
|
|
if ((flags & QUARKX1000_GPIO_POL_MASK) == QUARKX1000_GPIO_POL_INV)
|
|
new_value = 1 << pin;
|
|
|
|
port->all &= ~bit_mask;
|
|
port->all |= new_value;
|
|
|
|
if (write_port_regs(data, REG_POL_INV_PORT0, port) < 0)
|
|
return -1;
|
|
|
|
data->out_pol_inv = port->all;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
gpio_pcal9535a_write(struct gpio_pcal9535a_data *data, uint32_t pin, uint32_t value)
|
|
{
|
|
union gpio_pcal9535a_port_data *port = &data->reg_cache.output;
|
|
uint16_t bit_mask, new_value;
|
|
|
|
if (!quarkX1000_i2c_is_available())
|
|
return -1;
|
|
|
|
bit_mask = 1 << pin;
|
|
|
|
new_value = (value << pin) & bit_mask;
|
|
new_value ^= (data->out_pol_inv & bit_mask);
|
|
new_value &= bit_mask;
|
|
|
|
port->all &= ~bit_mask;
|
|
port->all |= new_value;
|
|
|
|
return write_port_regs(data, REG_OUTPUT_PORT0, port);
|
|
}
|
|
|
|
int
|
|
gpio_pcal9535a_read(struct gpio_pcal9535a_data *data, uint32_t pin, uint32_t *value)
|
|
{
|
|
union gpio_pcal9535a_port_data buf;
|
|
|
|
if (!quarkX1000_i2c_is_available())
|
|
return -1;
|
|
|
|
if (read_port_regs(data, REG_INPUT_PORT0, &buf) < 0)
|
|
return -1;
|
|
|
|
*value = (buf.all >> pin) & 0x01;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
gpio_pcal9535a_config(struct gpio_pcal9535a_data *data, uint32_t pin, int flags)
|
|
{
|
|
if (!quarkX1000_i2c_is_available())
|
|
return -1;
|
|
|
|
if (setup_pin_dir(data, pin, flags) < 0)
|
|
return -1;
|
|
|
|
if (setup_pin_polarity(data, pin, flags) < 0)
|
|
return -1;
|
|
|
|
if (setup_pin_pullupdown(data, pin, flags) < 0)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
setup_port_dir(struct gpio_pcal9535a_data *data, uint32_t pin, int flags)
|
|
{
|
|
union gpio_pcal9535a_port_data *port = &data->reg_cache.dir;
|
|
|
|
port->all = ((flags & QUARKX1000_GPIO_DIR_MASK) == QUARKX1000_GPIO_IN) ? 0xFFFF : 0x0;
|
|
|
|
return write_port_regs(data, REG_CONF_PORT0, port);
|
|
}
|
|
|
|
static int
|
|
setup_port_pullupdown(struct gpio_pcal9535a_data *data, uint32_t pin, int flags)
|
|
{
|
|
union gpio_pcal9535a_port_data *port;
|
|
|
|
if ((flags & QUARKX1000_GPIO_PUD_MASK) != QUARKX1000_GPIO_PUD_NORMAL) {
|
|
port = &data->reg_cache.pud_sel;
|
|
port->all = ((flags & QUARKX1000_GPIO_PUD_MASK) == QUARKX1000_GPIO_PUD_PULL_UP) ? 0xFFFF : 0x0;
|
|
|
|
if (write_port_regs(data, REG_PUD_SEL_PORT0, port) < 0)
|
|
return -1;
|
|
}
|
|
|
|
port = &data->reg_cache.pud_en;
|
|
port->all = ((flags & QUARKX1000_GPIO_PUD_MASK) != QUARKX1000_GPIO_PUD_NORMAL) ? 0xFFFF : 0x0;
|
|
|
|
return write_port_regs(data, REG_PUD_EN_PORT0, port);
|
|
}
|
|
|
|
static int
|
|
setup_port_polarity(struct gpio_pcal9535a_data *data, uint32_t pin, int flags)
|
|
{
|
|
union gpio_pcal9535a_port_data *port = &data->reg_cache.pol_inv;
|
|
|
|
port->all = ((flags & QUARKX1000_GPIO_POL_MASK) == QUARKX1000_GPIO_POL_INV) ? 0xFFFF : 0x0;
|
|
|
|
if (write_port_regs(data, REG_POL_INV_PORT0, port) < 0)
|
|
return -1;
|
|
|
|
data->out_pol_inv = port->all;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
gpio_pcal9535a_write_port(struct gpio_pcal9535a_data *data, uint32_t pin, uint32_t value)
|
|
{
|
|
union gpio_pcal9535a_port_data *port = &data->reg_cache.output;
|
|
uint16_t bit_mask, new_value;
|
|
|
|
if (!quarkX1000_i2c_is_available())
|
|
return -1;
|
|
|
|
port->all = value;
|
|
bit_mask = data->out_pol_inv;
|
|
|
|
new_value = value & bit_mask;
|
|
new_value ^= data->out_pol_inv;
|
|
new_value &= bit_mask;
|
|
|
|
port->all &= ~bit_mask;
|
|
port->all |= new_value;
|
|
|
|
return write_port_regs(data, REG_OUTPUT_PORT0, port);
|
|
}
|
|
|
|
int
|
|
gpio_pcal9535a_read_port(struct gpio_pcal9535a_data *data, uint32_t pin, uint32_t *value)
|
|
{
|
|
union gpio_pcal9535a_port_data buf;
|
|
|
|
if (!quarkX1000_i2c_is_available())
|
|
return -1;
|
|
|
|
if (read_port_regs(data, REG_INPUT_PORT0, &buf) < 0)
|
|
return -1;
|
|
|
|
*value = buf.all;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
gpio_pcal9535a_config_port(struct gpio_pcal9535a_data *data, uint32_t pin, int flags)
|
|
{
|
|
if (!quarkX1000_i2c_is_available())
|
|
return -1;
|
|
|
|
if (setup_port_dir(data, pin, flags) < 0)
|
|
return -1;
|
|
|
|
if (setup_port_polarity(data, pin, flags) < 0)
|
|
return -1;
|
|
|
|
if (setup_port_pullupdown(data, pin, flags) < 0)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
gpio_pcal9535a_init(struct gpio_pcal9535a_data *data, uint16_t i2c_slave_addr)
|
|
{
|
|
/* has to init after I2C master */
|
|
if (!quarkX1000_i2c_is_available())
|
|
return -1;
|
|
|
|
data->i2c_slave_addr = i2c_slave_addr;
|
|
|
|
/* default for registers according to datasheet */
|
|
data->reg_cache.output.all = 0xFFFF;
|
|
data->reg_cache.pol_inv.all = 0x0;
|
|
data->reg_cache.dir.all = 0xFFFF;
|
|
data->reg_cache.pud_en.all = 0x0;
|
|
data->reg_cache.pud_sel.all = 0xFFFF;
|
|
|
|
return 0;
|
|
}
|